Bullseye Power Batmowheel for Ko4
#1
Bullseye Power Batmowheel for Ko4
So i've been talking with David from Bullseye Power. They've agreed to make a batmowheel as a drop in replacement for a stock Ko4 wheel.
Batmowheels have time and time again(37 to be exact) to flow more air, make more power, and more torque than every wheel its gone up against at the same boost levels. Along with decreased spool times. Not only do you get more hp and tq with a Batmowheel, but what people really feel is the butt dyno difference, the change in power band. Where most wheels run out of breath at higher rpms the Batmowheel will carry the power another 500-750rpms along with the decreased spool time. therefore increasing the over all power band anywhere from 750rpms to 1,000 rpms
What we need is a group of people willing to commit to buying, NO DEPOSIT NEEDED, once this wheel is produced. it will be produced in runs of 10 so first come first serve. We also need just two people are who are willing to test this wheel. We want someone fully bolted and someone completely stock who's willing to tune the car and then drop this wheel in and retune.
By completely bolted we mean; Intake, hot&cold side piping, intercooler, downpipe, catback. any combination of brands, catless, muffler delete, etc as long as nothing is changed when switching wheels.
By completely stock with tune we mean; ABOSLUTELY NOTHING BUT A TUNE. reason for needing a tune pre-test is because its obvious these cars will have gains by being tuned. so we want to go ahead and start with the tune so we know that car is being pushed as far as it can before swapping wheels.
We need one person, preferably one of the test cars to send in their compressor wheel to BEP so the Batmo's can be made. The upfront cost of this is $399, you will receive your wheel + the batmowheel back. If gains are not had, a complete refund will be given.
Price for a BatMoWheel after production will be $399
Price for a Double BatMoWheel will be ~$475
Double bat's will be produced if the gains from a single are great enough to ensure a double bat will be worth the time/money.
Test cars, you MUST do a before and after dyno on the same dyno with the same tuner to ensure least amount of variables, if you can not do this please do not volunteer.
For more about Bullseye and the new batmowheels please take a look at their website and facebook page
Bullseye Power Turbos
Bullseye Power Turbos
And on facebook under Bullseye Power Fan Club
So... who's ready.
Please PM me if you would like to be in the purchase group.
Bolted Test Car:
Stock Test Car: NihontoSS
In to buy:
1. ATLsilverSS
2. 1LSJ2NV
3. cdnite
4. mastashake_88
5. Gunney_07
6. 09cobaltSS
7. Boosted4
Batmowheels have time and time again(37 to be exact) to flow more air, make more power, and more torque than every wheel its gone up against at the same boost levels. Along with decreased spool times. Not only do you get more hp and tq with a Batmowheel, but what people really feel is the butt dyno difference, the change in power band. Where most wheels run out of breath at higher rpms the Batmowheel will carry the power another 500-750rpms along with the decreased spool time. therefore increasing the over all power band anywhere from 750rpms to 1,000 rpms
What we need is a group of people willing to commit to buying, NO DEPOSIT NEEDED, once this wheel is produced. it will be produced in runs of 10 so first come first serve. We also need just two people are who are willing to test this wheel. We want someone fully bolted and someone completely stock who's willing to tune the car and then drop this wheel in and retune.
By completely bolted we mean; Intake, hot&cold side piping, intercooler, downpipe, catback. any combination of brands, catless, muffler delete, etc as long as nothing is changed when switching wheels.
By completely stock with tune we mean; ABOSLUTELY NOTHING BUT A TUNE. reason for needing a tune pre-test is because its obvious these cars will have gains by being tuned. so we want to go ahead and start with the tune so we know that car is being pushed as far as it can before swapping wheels.
We need one person, preferably one of the test cars to send in their compressor wheel to BEP so the Batmo's can be made. The upfront cost of this is $399, you will receive your wheel + the batmowheel back. If gains are not had, a complete refund will be given.
Price for a BatMoWheel after production will be $399
Price for a Double BatMoWheel will be ~$475
Double bat's will be produced if the gains from a single are great enough to ensure a double bat will be worth the time/money.
Test cars, you MUST do a before and after dyno on the same dyno with the same tuner to ensure least amount of variables, if you can not do this please do not volunteer.
For more about Bullseye and the new batmowheels please take a look at their website and facebook page
Bullseye Power Turbos
Bullseye Power Turbos
And on facebook under Bullseye Power Fan Club
So... who's ready.
Please PM me if you would like to be in the purchase group.
Bolted Test Car:
Stock Test Car: NihontoSS
In to buy:
1. ATLsilverSS
2. 1LSJ2NV
3. cdnite
4. mastashake_88
5. Gunney_07
6. 09cobaltSS
7. Boosted4
Last edited by EXsoccer1921; 12-26-2011 at 07:24 PM.
#3
$350 upfront price. yes wheel needs to be sent in to them. unsure of turn around time but like David said, if it doesn't show any gains, a refund will be given sans cost of shipping
#5
Resident Post Whore/Troll
iTrader: (7)
Join Date: 07-25-08
Location: Sin City!!!!
Posts: 16,202
Likes: 0
Received 0 Likes
on
0 Posts
damn lol ok sorry im out then, i cant send in my stock wheel, i need to be able to drive my car thats all. the money isnt an issue just the wheel part
and yes i can get an HPT tune, my buddy here has the software
and yes i can get an HPT tune, my buddy here has the software
Last edited by 07SSYellow; 11-03-2011 at 05:50 PM. Reason: Automerged Doublepost
#11
if its anything like other double bats produce. it will be better results than the 4+
and yes it is just a drop in wheel upgrade. some of the batmowheels and double batmowheel setups require a whole new turbo to be bought with the wheel installed. this is not the case. complete drop in replacement.
and yes it is just a drop in wheel upgrade. some of the batmowheels and double batmowheel setups require a whole new turbo to be bought with the wheel installed. this is not the case. complete drop in replacement.
#13
Senior Member
iTrader: (4)
Join Date: 08-22-09
Location: georgia
Posts: 1,567
Likes: 0
Received 0 Likes
on
0 Posts
if its anything like other double bats produce. it will be better results than the 4+
and yes it is just a drop in wheel upgrade. some of the batmowheels and double batmowheel setups require a whole new turbo to be bought with the wheel installed. this is not the case. complete drop in replacement.
and yes it is just a drop in wheel upgrade. some of the batmowheels and double batmowheel setups require a whole new turbo to be bought with the wheel installed. this is not the case. complete drop in replacement.
#16
Senior Member
iTrader: (1)
i pmd you.. i have a k04 thats messed up.. I can send it to them they can make wheel and install, I have dyno sheets from my car on the k04, will have it on the bnr 2871 soon as well , and can swap the turbo .. and get numbers for this if you guys can wait a bit.. I have no problem testing things out.. but it will be done with the same tuner.. trifecta but i dont feel changing tuners is fair representation of how something performs
#17
can anyone provide a quick explanation of a batmowheel? because more power, quicker spool, 350 bones, and the most awesomest upgrade name ever sounds like complete win.
#23
yeah thats the problem we're running in to. people have a spare turbo but can't send it in. atleast we know people will buy once its produced! hahah
well have kevin drive you around and send in your turbo!
well have kevin drive you around and send in your turbo!
Last edited by EXsoccer1921; 11-03-2011 at 06:35 PM. Reason: Automerged Doublepost
#24
jesus f'ing christ that looks awesome. id buy one just to look at lol.............but seriously if my turbo ever blew, or i ever rebuilt/built my engine or turbo i would buy this for sure