2.8 and 60's???????
#1
New Member
Thread Starter
Join Date: 06-21-08
Location: San Diego, CA
Posts: 168
Likes: 0
Received 0 Likes
on
0 Posts
2.8 and 60's???????
I am considering upgrading my gm stage 2 to a 2.8 with 60's..............
Is it safe to run this without any cooling mods as long as my custom tune is not super aggressive? i seem to get different oppinions on this everytime i ask..
any help/insight is greatly appreciated.
Is it safe to run this without any cooling mods as long as my custom tune is not super aggressive? i seem to get different oppinions on this everytime i ask..
any help/insight is greatly appreciated.
#5
Senior Member
Join Date: 04-29-06
Location: Mulberry, Florida
Posts: 2,977
Likes: 0
Received 0 Likes
on
0 Posts
if someone tunes it for you, they can retune it later at no charge (or a small fee if they choose for convenience).
You'll just wont be able to run as much timing, cuz as the temps go up the PCM starts pulling timing to keep detonation down.
You'll just wont be able to run as much timing, cuz as the temps go up the PCM starts pulling timing to keep detonation down.
#6
New Member
Thread Starter
Join Date: 06-21-08
Location: San Diego, CA
Posts: 168
Likes: 0
Received 0 Likes
on
0 Posts
so let me get this straight.....it will be safe if custom tuned for awhile and i could add the h e later and have it retuned for additional safety and power?
#7
Member
Join Date: 10-28-08
Location: Nova Scotia, Canada
Posts: 352
Likes: 0
Received 0 Likes
on
0 Posts
Get a scan gauge and keep an eye on temps and keep away from back to back pulls you'll be ok ... if you add a h/e or something like that later you dont have to get a new tune.
Thread
Thread Starter
Forum
Replies
Last Post