9/27 TOG Headers "Group Purchase Price"
#27
Originally Posted by zinner
Anyone get their TOG header yet?
#30
Originally Posted by BlAckOnBLaCK
Nope.....when I talked to them they said mid to late NOV and now since they extended the GP, I wounder if they pushed back the production date?????
i don't think he pushed back the date. i talked to him last week and he didn't mention it
#33
Originally Posted by Dman
so this header & dp would bold up to a magnaflow catback exhaust? just looking at all my options here...
Originally Posted by Chevypowered
$420 i believe. So they should be shipping this week right??? I sure hope so
not sure, i'll find out tomorrow morning though
#34
Originally Posted by selfinfliction
i don't think he pushed back the date. i talked to him last week and he didn't mention it
SWEEET! Yeah, that was just me assuming. There I go again trying to use my brain.
#36
LSX RWD S/C conversion
iTrader: (2)
Originally Posted by Chevypowered
So any news on the headers and when they will be shipped????
Rod,
Were still working on them. Estimated completion time mid to end of November. Wer'e doing our best to meet that. Thanks for being patient.
Regards,
Jon
The Other Guys Performance Products
Ph. (951)351-9466
Fax (951)351-9475
www.theotherguysproducts.com
#37
Senior Member
Join Date: 04-11-04
Location: patterson, ca
Posts: 2,175
Likes: 0
Received 0 Likes
on
0 Posts
so still not out, hmm better be a good header, i really hope it shows more than 10whp gain. thats kinda weak sauce for only 10whp and 5wtq, gm mani gains that much lol
#38
Originally Posted by Eddie
so still not out, hmm better be a good header, i really hope it shows more than 10whp gain. thats kinda weak sauce for only 10whp and 5wtq, gm mani gains that much lol
trust me, those numbers are extremely conservative. once people get their own dynos done.. i might even get accused of underrating the #'s
#40
New Member
Join Date: 11-16-05
Location: Sunrise, Florida
Posts: 159
Likes: 0
Received 0 Likes
on
0 Posts
I have dealt with TOG in the past with my Grand Prix. I have their headers on my car and absolutely love them! I have dealt with other brands of headers and promptly sold them before ever installing them. I have never regretted my decision to buy the TOGs for the Grand Prix. I highly recommend any of their products. I have met Jon and can say that he is an enthusiast as well as a honest vendor. My friends in my car club also run their headers and have had stellar results and excellant warranty coverage as well.
As far as results go (I have a RT downpipe/High Flow Cat, SLP cat-back exhaust, rockers, and smaller pulley, etc.): They dynoed 20 horsepower and 16 ft-lbs torque on a stock GTP. One can assume the results would be similar with the Cobalt SS/SC due to the forced induction. I would say that they are underrated at 10hp, 5ftlbs torque. Also, as stated previously, the results will increase dramatically once other complimentary mods are added. I noticed more gains than the stated stock ratings.
Enjoy!
As far as results go (I have a RT downpipe/High Flow Cat, SLP cat-back exhaust, rockers, and smaller pulley, etc.): They dynoed 20 horsepower and 16 ft-lbs torque on a stock GTP. One can assume the results would be similar with the Cobalt SS/SC due to the forced induction. I would say that they are underrated at 10hp, 5ftlbs torque. Also, as stated previously, the results will increase dramatically once other complimentary mods are added. I noticed more gains than the stated stock ratings.
Enjoy!
#41
So if stage 2 says we will gain 36 hp....it will probably be more than that because of the header? I have heard people say that the gains will rise with each mod but I just want to make sure I am on the same page.
#43
Senior Member
Join Date: 06-05-05
Location: Fort Collins, CO
Posts: 2,303
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BlAckOnBLaCK
So if stage 2 says we will gain 36 hp....it will probably be more than that because of the header? I have heard people say that the gains will rise with each mod but I just want to make sure I am on the same page.
The stage kits Add X HP and y Tq. They are basing it off the stock numbers because thats what is important to them but if you have a header, and CAI then get a Dyno done and find you have gained 20 Hp and 15 Tq then you can take your stock lets say 200 Hp and 190 Tq. add the mods to it
220Hp and 205 Tq. then with the stage kits that add X Hp and y Tq.
220 + X=Hp
205 + Y=Tq
#45
Domestics Pwn
Originally Posted by zinner
Everyone still waiting for their headers?
Hopefully they'll update the forums themselves, but I got this in an email from Jon today:..........
The headers are still in production. We had a short delay with the flanges. We are working as quick as possible to complete the finished product. Apologize for the delay.
Regards,
Jon
The Other Guys Performance Products
Ph. (951)351-9466
Fax (951)351-9475
www.theotherguysproducts.com
The headers are still in production. We had a short delay with the flanges. We are working as quick as possible to complete the finished product. Apologize for the delay.
Regards,
Jon
The Other Guys Performance Products
Ph. (951)351-9466
Fax (951)351-9475
www.theotherguysproducts.com
#49
New Member
Join Date: 07-05-05
Location: Southern Illinois
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
TOG Disconnect
I just tried to call The Other Guys about the header order. I have just found out that the phone has been disconnected. I think we have gotten the shaft from these jokers. I hope that I am incorrect. If you are still out there TOG what is up with our headers? You charged my card a month and half ago and still no product. I think you are not being very honest with us.
#50
last night someone on the redline forums ran into that and they sent an email. TOG has moved to a new shop, and he said the headers are almost finished and will be sent to the coating place shortly.
no worries
no worries