boost?
#1
New Member
Thread Starter
Join Date: 02-22-07
Location: Ohio/Kentucky
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
boost?
i just got a new ss/sc 2 weeks ago and its only runnin 4psi...about 3 months ago the dealer did somehtin to the PCM, would that have anything to do with this...and how can i fix this
#3
Senior Member
Join Date: 09-18-06
Location: Orange County, CA
Posts: 537
Likes: 0
Received 0 Likes
on
0 Posts
make the dealer fix it. keep taking it back. if your only boosting 4 psi, your guage might be fucked up, or literally your only boosting 4. You should see about 11psi stock
#4
New Member
Thread Starter
Join Date: 02-22-07
Location: Ohio/Kentucky
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
well i take it in to the dealer friday to get my headlights adjusted so il have them deal with it...
my friend told me that if i unplug the PCM for a few minutes and connect it back that it will fix the problem...is this true?
my friend told me that if i unplug the PCM for a few minutes and connect it back that it will fix the problem...is this true?
Last edited by doubleC; 05-23-2007 at 01:24 PM. Reason: Automerged Doublepost
#9
Its under the hood. If you want to reset the PCM, walk to the trunk and disconnect the battery.
You sure this is under full throttle, right? You won't get full boost sitting at a stoplight.
You sure this is under full throttle, right? You won't get full boost sitting at a stoplight.
#10
New Member
Thread Starter
Join Date: 02-22-07
Location: Ohio/Kentucky
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
ya last night me and my friend were testin its limits and it was only goin to 4psi
ya we disconnected the battery and it didnt do anything
ya we disconnected the battery and it didnt do anything
Last edited by doubleC; 05-23-2007 at 04:43 PM. Reason: Automerged Doublepost
#11
Senior Member
Join Date: 09-18-06
Location: Orange County, CA
Posts: 537
Likes: 0
Received 0 Likes
on
0 Posts
DO NOT DISCONNECT THE PCM!!!!!!!! Discconnect the battery for 20 mins, and the pcm will be reset to stock. IF you have stage II, and you disconnect that battery for 20 mins, it will just reset the computer to the stock Stage II tune.
You HAVE to disconnect it for at least 20 mins.
You HAVE to disconnect it for at least 20 mins.
#13
New Member
Thread Starter
Join Date: 02-22-07
Location: Ohio/Kentucky
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
20 minutes...i only let it sit for like 3 or 4...thanks, and whats a kPa?
i had it disconnected for about 25 minutes and it still isnt fixed any other suggestions or shouldi just let the dealer fix it
DO NOT DISCONNECT THE PCM!!!!!!!! Discconnect the battery for 20 mins, and the pcm will be reset to stock. IF you have stage II, and you disconnect that battery for 20 mins, it will just reset the computer to the stock Stage II tune.
You HAVE to disconnect it for at least 20 mins.
You HAVE to disconnect it for at least 20 mins.
Last edited by doubleC; 05-23-2007 at 10:07 PM. Reason: Automerged Doublepost
#15
Senior Member
Join Date: 04-20-06
Location: Your Computer!
Posts: 2,031
Likes: 0
Received 0 Likes
on
0 Posts
That doesn't even make sense.. kPa is a significantly higher reading then PSI.
I run a little over 90kPa at WOT which is roughly 13.5psi. (P.S. I'm stock.)
I run a little over 90kPa at WOT which is roughly 13.5psi. (P.S. I'm stock.)
#17
Senior Member
Join Date: 02-27-07
Location: Houston, Tx
Posts: 984
Likes: 0
Received 0 Likes
on
0 Posts
#19
Senior Member
iTrader: (1)
megapacals would just read 0.09 instead of ninety lol
id rather read Bar instead of megapascal, i prefer kilopacals to megapascals as i prefer psi to kilopacals lol but inreality there all just gauge pressure, you have to add atmospheric pressure yet to get absolute, k im done being a nerd lol
id rather read Bar instead of megapascal, i prefer kilopacals to megapascals as i prefer psi to kilopacals lol but inreality there all just gauge pressure, you have to add atmospheric pressure yet to get absolute, k im done being a nerd lol
#21
New Member
Thread Starter
Join Date: 02-22-07
Location: Ohio/Kentucky
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
well i disconnected the battery and now my check engine light is on, so im just gonna bitch at the dealer and make them fix it...im pretty sure they r the ones who fucked it up in the first place...
#22
Senior Member
Join Date: 02-27-07
Location: Houston, Tx
Posts: 984
Likes: 0
Received 0 Likes
on
0 Posts
megapacals would just read 0.09 instead of ninety lol
id rather read Bar instead of megapascal, i prefer kilopacals to megapascals as i prefer psi to kilopacals lol but inreality there all just gauge pressure, you have to add atmospheric pressure yet to get absolute, k im done being a nerd lol
id rather read Bar instead of megapascal, i prefer kilopacals to megapascals as i prefer psi to kilopacals lol but inreality there all just gauge pressure, you have to add atmospheric pressure yet to get absolute, k im done being a nerd lol