Cel wtf
#1
Senior Member
Thread Starter
Join Date: 09-07-09
Location: Blue Earth MN
Posts: 863
Likes: 0
Received 0 Likes
on
0 Posts
Cel wtf
ok i have the airbox mod and res delete and magnaflow muffler its a chambered muffler and i have had a cel since i did a airbox mod so i figured it was from the intake and was a lean code but i took the muffler off one day to put a straight through muffler on and my cel went off the whole time i had that muffler on then i put my old one on and the cel comes back on wtf any ideas
#8
Senior Member
Thread Starter
Join Date: 09-07-09
Location: Blue Earth MN
Posts: 863
Likes: 0
Received 0 Likes
on
0 Posts
#9
Senior Member
iTrader: (2)
Do you not have a tuner near by you? Also with that OTTP tune I do not see you running lean.
#11
Senior Member
Thread Starter
Join Date: 09-07-09
Location: Blue Earth MN
Posts: 863
Likes: 0
Received 0 Likes
on
0 Posts
i dont have the ottp in yet just air box and exhaust what do you think it could be then there is no other reason a code would pop up after intake other than a lean code
#15
Senior Member
iTrader: (2)
CODES DUDE! For all we know its random misfire. If your gunna act like a dick about me suggesting something then you deserve no help. We are trying to diagnosing in the dark. If someone else knows what it is from personal experience great you win. Nobody has chimed in just yet about it that has.
#17
Senior Member
Thread Starter
Join Date: 09-07-09
Location: Blue Earth MN
Posts: 863
Likes: 0
Received 0 Likes
on
0 Posts
dude i didnt mean to be a dick sorry but i wont be able to get codes right now so i guess im fucked i will update when i get codes i guess i thought maybe someone would have an idea of what it was i guess i was wrong again sorry
haha i checked the bearing it was good
haha i checked the bearing it was good
Last edited by blake05SS; 05-13-2010 at 05:01 PM. Reason: Automerged Doublepost
#22
Senior Member
Thread Starter
Join Date: 09-07-09
Location: Blue Earth MN
Posts: 863
Likes: 0
Received 0 Likes
on
0 Posts
alright went to kato today and there were two codes the first one was a lean code as i thought but there was another one P0603 and it said "control module long term memory reset" and the explanation was " not set ecm detected the checksum did not match a previous checksum" and at the bottom it says failed ecm so what the heck does that mean
alright that code is just because i unhooked the battery so why would a lean code go off when i take my muffler off
alright that code is just because i unhooked the battery so why would a lean code go off when i take my muffler off
Last edited by blake05SS; 05-14-2010 at 07:23 PM. Reason: Automerged Doublepost
#24
Senior Member
Join Date: 06-26-09
Location: Rochester, MN
Posts: 609
Likes: 0
Received 0 Likes
on
0 Posts
alright went to kato today and there were two codes the first one was a lean code as i thought but there was another one P0603 and it said "control module long term memory reset" and the explanation was " not set ecm detected the checksum did not match a previous checksum" and at the bottom it says failed ecm so what the heck does that mean
alright that code is just because i unhooked the battery so why would a lean code go off when i take my muffler off
alright that code is just because i unhooked the battery so why would a lean code go off when i take my muffler off
Last edited by skatin_boarding; 05-15-2010 at 10:43 AM. Reason: Automerged Doublepost
#25
Senior Member
iTrader: (5)
[QUOTE=skatin_boarding;4933276]You can shut the cel off through a tune or they make a, im not sure what its called, but it extends the 02 sensor out of the pipe a little bit so the code wont show up.
QUOTE]
im running high flow cat and i didnt want the cel to happen so i got one of the o2 sensor extentions off ebay, its a right angle
here is something similar to what im talking about
QUOTE]
im running high flow cat and i didnt want the cel to happen so i got one of the o2 sensor extentions off ebay, its a right angle
here is something similar to what im talking about