Help which header and downpipe combo?
#1
Senior Member
Thread Starter
Help which header and downpipe combo?
i just got done looking at all my options and the CI header and downpipe would be more $$ then the vibrant combo and the zzp is only 80 bucks less then the vibrant so looks like ill be spending at least 500 im really wanting the stainless steal one no matter who i go with so what should i get? i plan on getting 1 3/4" primary tubes a catless downpipe and i want a 3'' downpipe with a 2.5 exit since i have a magna flow catback system now i need inputs plz and the vibrant downpipe is only in 2.5 i think
come one 25+ views and no info or inputs
come one 25+ views and no info or inputs
Last edited by craigk_c19; 03-26-2009 at 02:43 PM. Reason: Automerged Doublepost
#5
Senior Member
Thread Starter
sorry didnt know where to post this but after 62 views i figured i would have more input from people then just 2 people i guess at this rate it looks like ill be getting the vibrant
#6
Senior Member
Join Date: 07-16-08
Location: Boynton Beach, Fl
Posts: 5,610
Likes: 0
Received 0 Likes
on
0 Posts
If your going to not buy the clear image... atleast get the zzp..
Im pretty sure theres more power out of the zzp than the vibrant... plus it sounds a little nicer.
Im pretty sure theres more power out of the zzp than the vibrant... plus it sounds a little nicer.
#7
Senior Member
Thread Starter
really? from the research ive heard the opposite that the vibrant sounds looks and gives a little more hp thats why i made this thread to help me make a good decision but hell 75 vies later only 2 things have been said and the clear image is was to $$ for me
#9
Senior Member
Thread Starter
i dont have the founds to buy a $600 header i still have to get an h/e dual pass plate and my dual intercetors my tax refund was going in to the h/e duall pass and the intercetor and the gauge pod so this header and down pipe are coming out of my saving and i dont want to go broke with it but still want to get a nice one
#12
Senior Member
iTrader: (4)
If you are on a budget I would check this combo out.
CA sells their V2 header on ebay for $215 shipped.
1.7" primaries and a 3" collector. It is larger then 3"!
And a 3" ZZP dp with 2.5" flange
#13
Senior Member
Thread Starter
i was thinking about getting a mid length header tho and i really dont need a 3'' collector due to the fact that my hp goal is only 270ish and you only need the 3'' collector if you are making over 300 hp other wise its just over kill a possibly hurting your hp
#14
Senior Member
Join Date: 07-16-08
Location: Boynton Beach, Fl
Posts: 5,610
Likes: 0
Received 0 Likes
on
0 Posts
Who ever told you that... well... Ask us to clarify something if he tries to explain something to you again...
That is incorrect. A 3" collector is perfect for 270.. honestly i dont think you would get there without it.
Last edited by ShortStack; 03-27-2009 at 01:01 PM. Reason: Automerged Doublepost
#16
Senior Member
Thread Starter
i already looked at ci and they are way to $$ a dang it vibrant doesnt make a 3" then so then maybe the zz header and down pipe? with 1 3/4" primary tubes a catless downpipe and a 3'' downpipe with a 2.5 exit?
#18
Senior Member
Thread Starter
maybe i should look into it some more then i think they zz is alost a 100 bucks cheaper too anyone have any pictures of a stainless steal zz header and down pipe combo?
#19
Senior Member
Join Date: 10-10-08
Location: Richmond
Posts: 1,562
Likes: 0
Received 0 Likes
on
0 Posts
#20
Senior Member
Thread Starter
yes ^^ it always look new and after a couple 1,000's miles it doesnt look like junk and i personally think it will last longer iven know they both last the same
#21
Senior Member
iTrader: (4)
That is bs.
For the price of the Vibrant header/dp you might be able to get a CTI header/dp combo. There just was a recent GB on them. I missed out on the GB but contacted CTI and they gave me almost the same price. PM me for details.
ZZP's midlenght header/dp combo has problems with leaking. The reason is, they use a 2 bolt flange for the header to dp connection. All the other companies use a 3 bolt flange for that connection.
I picked up the CA V2 header and the ZZP 3" catless dp with 2.5" flange for $400 shipped. You can't beat it.
Use the money you save to buy a dual pass endplate or HE.
I picked up the CA V2 header and the ZZP 3" catless dp with 2.5" flange for $400 shipped. You can't beat it.
Use the money you save to buy a dual pass endplate or HE.
#22
Senior Member
Thread Starter
i AM getting both the dual pass endplate and h/e no matter what but like i said im pretty dead set on getting stainless steal and i really would like a mid length header is it true about the 2.5 downpipe being to small? if so then i might have to peace it togeather and where is the CA V2 header sold at?
#24
I know for a fact you've seen the threads involving ZZP's flex pipe welds breaking. They always say they've fixed the issue but it still happens, just like the flange leaks.
I still say CIA. It's something that's going to take a lot of abuse from heat, flexing, etc. Don't cut corners and get cheap parts, and the lifetime warranty is pretty awesome.
I still say CIA. It's something that's going to take a lot of abuse from heat, flexing, etc. Don't cut corners and get cheap parts, and the lifetime warranty is pretty awesome.
Last edited by Dainslaif; 03-27-2009 at 03:26 PM. Reason: Automerged Doublepost