Looking to get a tvs anything i should know!?!?!??!
#1
Senior Member
Thread Starter
Join Date: 06-11-09
Location: Iowa
Posts: 636
Likes: 0
Received 0 Likes
on
0 Posts
Looking to get a tvs anything i should know!?!?!??!
ok planing on going tvs wondering if there is anything i need to know
any problems with the tvs? do they come with supercharger oil?
i want to run E85 on 80lbs injectors do i need that added fuel pressure thing?
most of my upgrades are 2.5 will i still run good with exhaust and intake
what hp gains can i expect from this upgrade and running E85
also what the lowest pulley i can safely run on the tvs with staying with 60lbs
also need to run 2 steps colder from what i understand?
any problems with the tvs? do they come with supercharger oil?
i want to run E85 on 80lbs injectors do i need that added fuel pressure thing?
most of my upgrades are 2.5 will i still run good with exhaust and intake
what hp gains can i expect from this upgrade and running E85
also what the lowest pulley i can safely run on the tvs with staying with 60lbs
also need to run 2 steps colder from what i understand?
#4
Senior Member
iTrader: (1)
no problems
i went from 260 to 320 with a ton more room to go with just my meth setup e85 does better
ive got 60lbs on mine and i run a 2.8 but i only run to 7k and i have meth to pick up some slack on the injectors but again i can and will run this further into the rpms with out having to go bigger injector.
id suggest instead of getting 80s just get the fpr it works
im running 1 step colder plugs but my car is a bit different.
just be warned this tvs is a crazy beast
i went from 260 to 320 with a ton more room to go with just my meth setup e85 does better
ive got 60lbs on mine and i run a 2.8 but i only run to 7k and i have meth to pick up some slack on the injectors but again i can and will run this further into the rpms with out having to go bigger injector.
id suggest instead of getting 80s just get the fpr it works
im running 1 step colder plugs but my car is a bit different.
just be warned this tvs is a crazy beast
#5
Senior Member
iTrader: (1)
Join Date: 07-27-09
Location: Concord, NH
Posts: 3,723
Likes: 0
Received 0 Likes
on
0 Posts
The TVS is a badass setup I would just keep the 60s they should be fine and the smallest I would go as far as pulley size is a 2.8 thats whats Ive seen people with and it works great..
#8
Senior Member
iTrader: (1)
Join Date: 09-28-06
Location: Manhattan, KS
Posts: 4,160
Likes: 0
Received 0 Likes
on
0 Posts
I'm always curious when it comes to TVS threads. I'm not trying to offend people by the following, just curious. Why is it that everyone always shows a hp graph of 290ish, and Bryan (Area) is at 350?
Are the tunes that far off with those who aren't tuned by him, or what is it?
I'll say it again, I'm just curious, not trying to **** people off. Cause I know how you all get when someone mentions Bryan.
Are the tunes that far off with those who aren't tuned by him, or what is it?
I'll say it again, I'm just curious, not trying to **** people off. Cause I know how you all get when someone mentions Bryan.
#9
Senior Member
iTrader: (1)
Join Date: 07-02-05
Location: West Carrollton (Dayton), OH
Posts: 8,725
Likes: 0
Received 2 Likes
on
2 Posts
People expect a simple swap of blowers to equal MAD POWERZ!!!1!!1!!!11111!!!
The problem is there is tuning and supporting mods to be considered. People expect it to add tons of power without putting effort into it. That's what this cobalt community wants, huge gains from little input..... It doesn't work that way
The problem is there is tuning and supporting mods to be considered. People expect it to add tons of power without putting effort into it. That's what this cobalt community wants, huge gains from little input..... It doesn't work that way
#12
Junior Member
iTrader: (2)
Join Date: 03-14-08
Location: NorthEast Ohio
Posts: 421
Likes: 0
Received 0 Likes
on
0 Posts
People expect a simple swap of blowers to equal MAD POWERZ!!!1!!1!!!11111!!!
The problem is there is tuning and supporting mods to be considered. People expect it to add tons of power without putting effort into it. That's what this cobalt community wants, huge gains from little input..... It doesn't work that way
The problem is there is tuning and supporting mods to be considered. People expect it to add tons of power without putting effort into it. That's what this cobalt community wants, huge gains from little input..... It doesn't work that way
#13
Senior Member
iTrader: (1)
I'm always curious when it comes to TVS threads. I'm not trying to offend people by the following, just curious. Why is it that everyone always shows a hp graph of 290ish, and Bryan (Area) is at 350?
Are the tunes that far off with those who aren't tuned by him, or what is it?
I'll say it again, I'm just curious, not trying to **** people off. Cause I know how you all get when someone mentions Bryan.
Are the tunes that far off with those who aren't tuned by him, or what is it?
I'll say it again, I'm just curious, not trying to **** people off. Cause I know how you all get when someone mentions Bryan.
his car isnt on the stock pulley and he doesnt have to pay to tune his car. he sits on it all day every day and tunes and tunes and tunes. he has the means and the software and hardware to monitor everything that the car does all day every day. he also knows what he is doing. and he takes responsibility for what he does.
so if he breaks it he pays for it. most tuners who tune others cars keep themselves in there own safe zone so they dont have people looking to kill them for a broken motor.
anyone can make 500hp once it takes skill to make it consecutively
#16
Senior Member
haha ha youre bitch man....all those points about area?troof. I got tvs 2.75 /80/meth. area tuned i luv it . NO DYNO numbers yet but when i do i will post them and THEY WILL LIE (STD, Mustang etc) because the numbers game is bs....TVS rocks...
#18
Senior Member
#20
Senior Member
#22
Senior Member
It must depend on tuning, with Area tunes, I had 60's and have 80's now the idle was never an issue ever...unless I did something dumb like forgot to hook up the boost solenoid connector or whatever...or needed new spark plugs
Last edited by qwikredline; 11-24-2009 at 01:28 PM.
#24
Senior Member
#25
Senior Member
Join Date: 03-04-08
Location: Nor Cal
Posts: 2,018
Likes: 0
Received 0 Likes
on
0 Posts