Cobalt SS Network

2.0L LSJ Performance Tech 205hp Supercharged SS tuner version. 200 lb-ft of torque.

Official TVS Thread!!!

Thread Tools
 
Search this Thread
 
Old 06-06-2012, 10:27 PM
  #801  
Senior Member
iTrader: (3)
 
advise's Avatar
 
Join Date: 04-25-07
Location: Bohemia, New York, Long Island
Posts: 2,390
Received 18 Likes on 16 Posts
Originally Posted by kdub1492
Hey guys just picked up the AIS meth kit from Advice, I'm on TVS with 2.9, what size nozzle should I run with it? And is there anything else I should pick up. Its the trunk mount kit
Id say a 7 to 10
Try the 7 I sent you
Might be too small tho
But it all depends on your mix if water meth
I always used a 75/25 with the m62 worked great
advise is offline  
Reply Like
Old 06-06-2012, 10:28 PM
  #802  
Senior Member
iTrader: (8)
 
kdub1492's Avatar
 
Join Date: 12-07-10
Location: Chicago
Posts: 2,787
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by advise
Id say a 7 to 10
Try the 7 I sent you
Might be too small tho
But it all depends on your mix if water meth
I always used a 75/25 with the m62 worked great
75 water 25 meth?
kdub1492 is offline  
Reply Like
Old 06-06-2012, 10:34 PM
  #803  
Senior Member
iTrader: (2)
 
TStone's Avatar
 
Join Date: 02-21-11
Location: Dayton, Ohio
Posts: 3,311
Likes: 0
Received 7 Likes on 7 Posts
Originally Posted by kdub1492
75 water 25 meth?
other way. 75 meth 25 water
TStone is offline  
Reply Like
Old 06-06-2012, 11:22 PM
  #804  
G11
Senior Member
iTrader: (11)
 
G11's Avatar
 
Join Date: 12-21-09
Location: Kaysville UT
Posts: 1,950
Likes: 0
Received 0 Likes on 0 Posts
Definetly gonna get a Meth kit lol
G11 is offline  
Reply Like
Old 06-06-2012, 11:57 PM
  #805  
Senior Member
iTrader: (3)
 
100% METH's Avatar
 
Join Date: 01-02-10
Location: Los Angeles
Posts: 3,946
Received 15 Likes on 12 Posts
You will need more than 10gph at 23 psi with a 75/25 meth to water mix
100% METH is offline  
Reply Like
Old 06-07-2012, 12:06 AM
  #806  
Senior Member
iTrader: (3)
 
advise's Avatar
 
Join Date: 04-25-07
Location: Bohemia, New York, Long Island
Posts: 2,390
Received 18 Likes on 16 Posts
what iat2 are you guys seeing at the end off a pull just did a 3rd gear before
hit 25 psi with a top of 140 iat2
and dropped down to 20* above ambient temp in about 10 seconds
advise is offline  
Reply Like
Old 06-07-2012, 12:39 AM
  #807  
Senior Member
iTrader: (3)
 
100% METH's Avatar
 
Join Date: 01-02-10
Location: Los Angeles
Posts: 3,946
Received 15 Likes on 12 Posts
Put it to you this way...

We were able to do back to back pulls on a completely stock intercooler system @ 28 psi

4th gear pulls ending @ 125-135* on the dyno on a 75* morning

on a cool 50-60* night on the road we saw sub 120 @ 7400 in 3rd
100% METH is offline  
Reply Like
Old 06-07-2012, 12:49 AM
  #808  
Senior Member
iTrader: (3)
 
advise's Avatar
 
Join Date: 04-25-07
Location: Bohemia, New York, Long Island
Posts: 2,390
Received 18 Likes on 16 Posts
Originally Posted by 100% METH
Put it to you this way...

We were able to do back to back pulls on a completely stock intercooler system @ 28 psi

4th gear pulls ending @ 125-135* on the dyno on a 75* morning

on a cool 50-60* night on the road we saw sub 120 @ 7400 in 3rd
with water meth?
advise is offline  
Reply Like
Old 06-07-2012, 12:50 AM
  #809  
Senior Member
iTrader: (3)
 
100% METH's Avatar
 
Join Date: 01-02-10
Location: Los Angeles
Posts: 3,946
Received 15 Likes on 12 Posts
yessir

the ultimate cooling mod (50/50)
100% METH is offline  
Reply Like
Old 06-07-2012, 12:52 AM
  #810  
Senior Member
iTrader: (3)
 
advise's Avatar
 
Join Date: 04-25-07
Location: Bohemia, New York, Long Island
Posts: 2,390
Received 18 Likes on 16 Posts
gotcha
i mean it cools down great with my dual pass,h/e,euthanasia flow thru tank
but i feel like 140 is a little scary
when does the computer pull timing 160?
advise is offline  
Reply Like
Old 06-07-2012, 01:30 AM
  #811  
Got Bewst?
Thread Starter
iTrader: (8)
 
Bluelightning's Avatar
 
Join Date: 03-16-10
Location: Winnipeg, Manitoba
Posts: 11,034
Received 33 Likes on 32 Posts
140* isn't terrible. I believe with HPT you can set the computer up for whenever you want it to start pull timing. I see 125* with my 2.8" but also running a 14gph nozzle. Honestly, invest in a phenolic spacer. For $100 it's a great cooling mod.
Bluelightning is offline  
Reply Like
Old 06-07-2012, 01:45 AM
  #812  
Senior Member
iTrader: (4)
 
RooTBeeR's Avatar
 
Join Date: 02-18-07
Location: Whittier, Ca
Posts: 14,102
Received 0 Likes on 0 Posts
my **** must be wrong then...mine sees 160* even with he car stock on dual pass and opt-b
RooTBeeR is offline  
Reply Like
Old 06-07-2012, 03:19 AM
  #813  
Senior Member
iTrader: (3)
 
advise's Avatar
 
Join Date: 04-25-07
Location: Bohemia, New York, Long Island
Posts: 2,390
Received 18 Likes on 16 Posts
Originally Posted by Bluelightning
140* isn't terrible. I believe with HPT you can set the computer up for whenever you want it to start pull timing. I see 125* with my 2.8" but also running a 14gph nozzle. Honestly, invest in a phenolic spacer. For $100 it's a great cooling mod.
have one lol
advise is offline  
Reply Like
Old 06-07-2012, 08:26 AM
  #814  
Senior Member
iTrader: (15)
 
zrated89's Avatar
 
Join Date: 10-01-07
Location: newportnews va
Posts: 4,191
Likes: 0
Received 1 Like on 1 Post
guys 80# injectors with harness for sale only about 500 miles on the 80s. Will sell with harness for 160 shipped lmk
zrated89 is offline  
Reply Like
Old 06-07-2012, 09:09 AM
  #815  
Senior Member
iTrader: (1)
 
LaserblueSS's Avatar
 
Join Date: 01-24-06
Location: Henry county, Ga
Posts: 1,536
Likes: 0
Received 0 Likes on 0 Posts
anyone know if the AIS nozzle or Devils own nozzle will fit on the AEM injector? are nozzles a universal kinda thing? hoping so cause according to you guys i need to get a bigger nozzle ASAP if i plan on upping the power.
LaserblueSS is offline  
Reply Like
Old 06-07-2012, 09:36 AM
  #816  
574
Senior Member
iTrader: (5)
 
574's Avatar
 
Join Date: 11-16-11
Location: Indiana
Posts: 6,434
Likes: 0
Received 1 Like on 1 Post
Originally Posted by RooTBeeR
my **** must be wrong then...mine sees 160* even with he car stock on dual pass and opt-b
Maybe your pump is out?
574 is offline  
Reply Like
Old 06-07-2012, 09:47 AM
  #817  
Senior Member
iTrader: (4)
 
RooTBeeR's Avatar
 
Join Date: 02-18-07
Location: Whittier, Ca
Posts: 14,102
Received 0 Likes on 0 Posts
nope, when pump went out, cruising would hold 180 and a pull would hit 210-220
RooTBeeR is offline  
Reply Like
Old 06-07-2012, 09:51 AM
  #818  
574
Senior Member
iTrader: (5)
 
574's Avatar
 
Join Date: 11-16-11
Location: Indiana
Posts: 6,434
Likes: 0
Received 1 Like on 1 Post
dayummmmm haha
574 is offline  
Reply Like
Old 06-07-2012, 10:13 AM
  #819  
USA Y U NO HAVE AUTOBAHN?
iTrader: (7)
 
tylerjclance's Avatar
 
Join Date: 08-24-10
Location: Warren, IN
Posts: 12,847
Received 2 Likes on 2 Posts
my activity is low

that's actually my rank, wtf? LOL The battles thing..
Last edited by tylerjclance; 06-07-2012 at 10:13 AM. Reason: Automerged Doublepost
tylerjclance is offline  
Reply Like
Old 06-07-2012, 10:23 AM
  #820  
Administrator
Administrator
Platinum Member
iTrader: (25)
 
Staged07SS's Avatar
 
Join Date: 12-30-07
Location: NEPA
Posts: 14,331
Received 197 Likes on 175 Posts
Originally Posted by RooTBeeR
nope, when pump went out, cruising would hold 180 and a pull would hit 210-220
Damn....

I wouldn't have even tried a pull.

Props to you for tryin it out though man
Staged07SS is offline  
Reply Like
Old 06-07-2012, 11:25 AM
  #821  
Senior Member
iTrader: (1)
 
06blackg85ss's Avatar
 
Join Date: 04-22-06
Location: New York
Posts: 15,212
Received 20 Likes on 18 Posts
Originally Posted by advise
gotcha
i mean it cools down great with my dual pass,h/e,euthanasia flow thru tank
but i feel like 140 is a little scary
when does the computer pull timing 160?
stars dropping timing over 160, cuts boost at 190. 140 isn't too horrible for a blower car especially at the boost level you run (higher compression more heat etc). I see 156 on my car m62 2.7 pulley stock he and dual pass.
06blackg85ss is offline  
Reply Like
Old 06-07-2012, 11:53 AM
  #822  
Senior Member
iTrader: (2)
 
TStone's Avatar
 
Join Date: 02-21-11
Location: Dayton, Ohio
Posts: 3,311
Likes: 0
Received 7 Likes on 7 Posts
Originally Posted by LaserblueSS
anyone know if the AIS nozzle or Devils own nozzle will fit on the AEM injector? are nozzles a universal kinda thing? hoping so cause according to you guys i need to get a bigger nozzle ASAP if i plan on upping the power.
Yes! Nozzles are universal. I got the AEm kit and An AIS nozzle
TStone is offline  
Reply Like
Old 06-07-2012, 12:06 PM
  #823  
Senior Member
iTrader: (15)
 
zrated89's Avatar
 
Join Date: 10-01-07
Location: newportnews va
Posts: 4,191
Likes: 0
Received 1 Like on 1 Post
Originally Posted by 06blackg85ss
stars dropping timing over 160, cuts boost at 190. 140 isn't too horrible for a blower car especially at the boost level you run (higher compression more heat etc). I see 156 on my car m62 2.7 pulley stock he and dual pass.
Yea man like a said on a hot day at the track with an iat2 of 134 at the tree ill see 164 at the trap
zrated89 is offline  
Reply Like
Old 06-07-2012, 12:13 PM
  #824  
Senior Member
iTrader: (3)
 
100% METH's Avatar
 
Join Date: 01-02-10
Location: Los Angeles
Posts: 3,946
Received 15 Likes on 12 Posts
Euthanasia still makes those 1 gallon under the hood tank you could fill with ice.
100% METH is offline  
Reply Like
Old 06-07-2012, 12:23 PM
  #825  
Senior Member
iTrader: (15)
 
zrated89's Avatar
 
Join Date: 10-01-07
Location: newportnews va
Posts: 4,191
Likes: 0
Received 1 Like on 1 Post
I was considering that whats he charge? Can't ice the option b tank. I'm going to do something like that with a setup to run the ic pump and cooling fans in tye staging lanes ive never done any of that small stuff lol. Prolly would have been 11s all day if i did lol
zrated89 is offline  
Reply Like



Advanced Search
Quick Reply: Official TVS Thread!!!


Reply Closed Thread Share

All times are GMT -4. The time now is 08:59 AM.