Official TVS Thread!!!
#177
To all: Before I make this a sticky, I may deleat some posts that are not needed, so do not take offense if something you said is removed. Let's keep this thread on the positive side, and make sure to direct any members asking about the TVS to this thread. Thanks!
#182
Senior Member
iTrader: (4)
To "do it right".
$500-$1500 - Ported Head
$270 - NBS ZZPerformance - Neutral Balance Shafts #ZZ-NTRLBS
$650 - Cams Comp Cams - LSJ Performance Cams #
$290 - Springs ZZPerformance - 82# Ecotec Valve Springs #ZZ-82VS-ECT
$400 - ATI Damper ATI - ATI GM Ecotec Super Damper #
$130 - New front Cover for ATI ZZPerformance - Machined Front Cover for Ecotec 2.0/2.2/2.4L #
$45 - Valve Cover Gasket GM ACDelco - GM Valve Cover Gaskets - LSJ #GM-90537687
$22 - Front Cover Gasket FelPro - Ecotec Front Cover Gasket #FP-96352
$90 - Head Gasket Cometic - Cometic MLS Head Gasket for LSJ #CM-LSJ-027-87MM
$135 - Head Studs ARP - Headstuds for Ecotec #ARP-231-4701
$40 - Timing Chain Tensioner GM ACDelco - Timing Chain Tensioner Assembly #12608580
$2572 - $3572
What did I miss?
$500-$1500 - Ported Head
$270 - NBS ZZPerformance - Neutral Balance Shafts #ZZ-NTRLBS
$650 - Cams Comp Cams - LSJ Performance Cams #
$290 - Springs ZZPerformance - 82# Ecotec Valve Springs #ZZ-82VS-ECT
$400 - ATI Damper ATI - ATI GM Ecotec Super Damper #
$130 - New front Cover for ATI ZZPerformance - Machined Front Cover for Ecotec 2.0/2.2/2.4L #
$45 - Valve Cover Gasket GM ACDelco - GM Valve Cover Gaskets - LSJ #GM-90537687
$22 - Front Cover Gasket FelPro - Ecotec Front Cover Gasket #FP-96352
$90 - Head Gasket Cometic - Cometic MLS Head Gasket for LSJ #CM-LSJ-027-87MM
$135 - Head Studs ARP - Headstuds for Ecotec #ARP-231-4701
$40 - Timing Chain Tensioner GM ACDelco - Timing Chain Tensioner Assembly #12608580
$2572 - $3572
What did I miss?
#183
Super Moderator
iTrader: (3)
To "do it right".
$500-$1500 - Ported Head
$270 - NBS ZZPerformance - Neutral Balance Shafts #ZZ-NTRLBS
$650 - Cams Comp Cams - LSJ Performance Cams #
$290 - Springs ZZPerformance - 82# Ecotec Valve Springs #ZZ-82VS-ECT
$400 - ATI Damper ATI - ATI GM Ecotec Super Damper #
$130 - New front Cover for ATI ZZPerformance - Machined Front Cover for Ecotec 2.0/2.2/2.4L #
$45 - Valve Cover Gasket GM ACDelco - GM Valve Cover Gaskets - LSJ #GM-90537687
$22 - Front Cover Gasket FelPro - Ecotec Front Cover Gasket #FP-96352
$90 - Head Gasket Cometic - Cometic MLS Head Gasket for LSJ #CM-LSJ-027-87MM
$135 - Head Studs ARP - Headstuds for Ecotec #ARP-231-4701
$40 - Timing Chain Tensioner GM ACDelco - Timing Chain Tensioner Assembly #12608580
$2572 - $3572
What did I miss?
$500-$1500 - Ported Head
$270 - NBS ZZPerformance - Neutral Balance Shafts #ZZ-NTRLBS
$650 - Cams Comp Cams - LSJ Performance Cams #
$290 - Springs ZZPerformance - 82# Ecotec Valve Springs #ZZ-82VS-ECT
$400 - ATI Damper ATI - ATI GM Ecotec Super Damper #
$130 - New front Cover for ATI ZZPerformance - Machined Front Cover for Ecotec 2.0/2.2/2.4L #
$45 - Valve Cover Gasket GM ACDelco - GM Valve Cover Gaskets - LSJ #GM-90537687
$22 - Front Cover Gasket FelPro - Ecotec Front Cover Gasket #FP-96352
$90 - Head Gasket Cometic - Cometic MLS Head Gasket for LSJ #CM-LSJ-027-87MM
$135 - Head Studs ARP - Headstuds for Ecotec #ARP-231-4701
$40 - Timing Chain Tensioner GM ACDelco - Timing Chain Tensioner Assembly #12608580
$2572 - $3572
What did I miss?
Last edited by mrbelvedere; 04-04-2012 at 12:22 PM.
#184
Update....
I went through and deleated some of the rambling & nonsense.
I also made this thread a sticky.
Keep in mind, if this thread ever goes down hill, I will remove it from the sticky list.
Let's keep the good info from the experienced members coming, and remember to direct new members with questions about the TVS to this thread. Thanks!
I went through and deleated some of the rambling & nonsense.
I also made this thread a sticky.
Keep in mind, if this thread ever goes down hill, I will remove it from the sticky list.
Let's keep the good info from the experienced members coming, and remember to direct new members with questions about the TVS to this thread. Thanks!
#185
I agree with Staged, let's keep this thread on track and save the bickering for PM's.
#188
Also meth isn't cheap these days but i guess it all depends on the person and there set up..
#189
Ya you can make decient power on 93 for sure. But a TVS loves timing and revs. I love meth because it allows me to run a more aggressive tune and keeps my IATs much cooler. Meth is cheap. 5 gallons costs me $25. I run 50/50 and it lasts me almost all summer. But that will probably change after I install this 10gph nozzle lol.
#190
Ya you can make decient power on 93 for sure. But a TVS loves timing and revs. I love meth because it allows me to run a more aggressive tune and keeps my IATs much cooler. Meth is cheap. 5 gallons costs me $25. I run 50/50 and it lasts me almost all summer. But that will probably change after I install this 10gph nozzle lol.
#195
Doesn't seem like a lot of driving
Amen, one and done!
#197
#199
can't wait to get out to the track this year and go for 13 flat or maybe even high 12's. fastest time on the old set up was 13.4@114-116. New set up is beast mode
#200
Oh she thanks me every day when i start her up lol, are your Federal standards also in KM ? Honestly i think it would just be easier and less risk and hassle to drop my pulley a tad and also cheaper long term and short. All these talk about mods and i'm done with them!
can't wait to get out to the track this year and go for 13 flat or maybe even high 12's. fastest time on the old set up was 13.4@114-116. New set up is beast mode
can't wait to get out to the track this year and go for 13 flat or maybe even high 12's. fastest time on the old set up was 13.4@114-116. New set up is beast mode