StevesBlack06 LSJ build (round 2)
#1
StevesBlack06 LSJ build (round 2)
UPDATE: ITS ALIVE AGAIN!!! The fix seems to have worked!!!
as some of you may recall i blew up my engine a while back due to a sheared rod bolt. i sent a rod through the block and destructed a lot of other stuff in the process. i bought a new block and decided i wanted to build this bitch bullet proof. i got my engine back wednesday and me and bykryder83 (ryan) have been wrenchin on it every evening after work to get her put back together. i still need a few things to get it fully assembled but the mods are:
Bottom End:
Darton Sleeved 2.0 Saab Block
Diamond 10.5:1 CR pistons
Lightened, balanced, and knife edged crank
Balanced LSJ rods
ARP rod bolts
ARP Head Studs
GM Main studs
Balance Shaft Deletes
Celvit Main and Rod Bearings
AC delete (still lookin into this, for now the compressor is just free spinning)
Top End:
Ported head
Jbody Stage 2 Triflow cams
Jbody Solid Lifters
Supertech 78lb Valve springs/retainers
Supertech Valves .05 Oversized
5 angle valve job
Cometic .45 MLS gasket
Bates valve seats and seals
Ngk bkr7e
ZZP valve cover breather
Intake:
Ported M62 running a zzp 2.8" pulley
Ported Intake manifold
ZZP Phenolic intake manifold gasket
LS4 TB
OTTP 3" intake
Exhaust:
ZZP Midlength header and downpipe combo. (1.75 primaries, 3" collector and 3"downpipe)
P.S. Just sold the JBP header...
Fuel Delivery:
Siemens 80 lb/hr Injectors
E85
Cooling Modifications:
Italian Joe Dual pass endplate
Vulcan Turbo Driver side aluminum coolant tank
Vulcan Turbo Passenger side Flow through Coolant tank
CXR Frontmount heat exchanger
Suspension and Mount Modifications:
K sport Coilovers
JBody Strut Tower Brace
Bwoody Solid upper mount
Poly inserts for trans (for now)
im sure im forgetting a bunch of **** and ill add it when it all comes to mind. i plan on switching to a TVS/Turbo kit sooner or later but i wanna throw it back together with the m62 and see what it will do. its been down for so long im gonna enjoy it for a while before i put it away again for the winter. ill upload some pics of some progress shortly. tell me what you think CSS!
as some of you may recall i blew up my engine a while back due to a sheared rod bolt. i sent a rod through the block and destructed a lot of other stuff in the process. i bought a new block and decided i wanted to build this bitch bullet proof. i got my engine back wednesday and me and bykryder83 (ryan) have been wrenchin on it every evening after work to get her put back together. i still need a few things to get it fully assembled but the mods are:
Bottom End:
Darton Sleeved 2.0 Saab Block
Diamond 10.5:1 CR pistons
Lightened, balanced, and knife edged crank
Balanced LSJ rods
ARP rod bolts
ARP Head Studs
GM Main studs
Balance Shaft Deletes
Celvit Main and Rod Bearings
AC delete (still lookin into this, for now the compressor is just free spinning)
Top End:
Ported head
Jbody Stage 2 Triflow cams
Jbody Solid Lifters
Supertech 78lb Valve springs/retainers
Supertech Valves .05 Oversized
5 angle valve job
Cometic .45 MLS gasket
Bates valve seats and seals
Ngk bkr7e
ZZP valve cover breather
Intake:
Ported M62 running a zzp 2.8" pulley
Ported Intake manifold
ZZP Phenolic intake manifold gasket
LS4 TB
OTTP 3" intake
Exhaust:
ZZP Midlength header and downpipe combo. (1.75 primaries, 3" collector and 3"downpipe)
P.S. Just sold the JBP header...
Fuel Delivery:
Siemens 80 lb/hr Injectors
E85
Cooling Modifications:
Italian Joe Dual pass endplate
Vulcan Turbo Driver side aluminum coolant tank
Vulcan Turbo Passenger side Flow through Coolant tank
CXR Frontmount heat exchanger
Suspension and Mount Modifications:
K sport Coilovers
JBody Strut Tower Brace
Bwoody Solid upper mount
Poly inserts for trans (for now)
im sure im forgetting a bunch of **** and ill add it when it all comes to mind. i plan on switching to a TVS/Turbo kit sooner or later but i wanna throw it back together with the m62 and see what it will do. its been down for so long im gonna enjoy it for a while before i put it away again for the winter. ill upload some pics of some progress shortly. tell me what you think CSS!
Last edited by StevesBlack06; 03-11-2010 at 08:09 PM.
#7
meh... ive kicked it around but it seems to finikey for my liking. why are you getting rid of yours if you dont mind me asking?
no thanks. i recieved one of the good ones. smooth bends great welds. ran it last build and it sounded mean as hell and performed well.
no thanks. i recieved one of the good ones. smooth bends great welds. ran it last build and it sounded mean as hell and performed well.
Last edited by StevesBlack06; 11-15-2009 at 11:24 PM. Reason: Automerged Doublepost
#8
Senior Member
iTrader: (1)
Join Date: 07-02-05
Location: West Carrollton (Dayton), OH
Posts: 8,725
Likes: 0
Received 2 Likes
on
2 Posts
Lookin good Steve.
Didn't know you had JBP cams and header tho... Not my fav but if you say it looks good and all I'll have to check in in person. Still didn't get an email of your mods, but this works lol
Didn't know you had JBP cams and header tho... Not my fav but if you say it looks good and all I'll have to check in in person. Still didn't get an email of your mods, but this works lol
#9
Senior Member
because e-85 and meth are rated at the same octaine lv so its either one or the other and i chose e-85 .
#18
and thanks to everyone for the comments. any input would be appreciated. i have no idea when ill get her in the dyno but as soon as i get everything from ottp ill have it out for break in. hopefully i can get it broken in and tear it up a little before it gets shitty out.
#21
Senior Member
Join Date: 11-12-07
Location: Maryland
Posts: 1,537
Likes: 0
Received 0 Likes
on
0 Posts
nice man i like the set up.... how much did that bottem end set up run you... with the sleeves installed and the arp bolts, if you dont mind me asking... im considering sleeving mine, but dont know how much vs. is it worth it
#25
Senior Member
iTrader: (1)
Join Date: 06-27-06
Location: indiana
Posts: 1,399
Likes: 0
Received 0 Likes
on
0 Posts
we started these builds almost a yr ago the zzp stroker wasnt out yet but this seemed to be the best set up for him so we built a 2.0 beast sc... spike ill run ya anytime when we bouth get our cars runnin lol 2.2 turbo ftw