Twin-Charge anyone?
#176
Senior Member
Join Date: 09-05-07
Location: Sasebo Japan
Posts: 10,662
Likes: 0
Received 0 Likes
on
0 Posts
http://www.zzperformance.com/miscftp/ZZP-vs-H-Dyno.jpg
The Hahn kit making 360WHP doesn't reach spool til 4500 rpm. I'm not sure why we have so many haters on this forum but it's getting out of hand. I feel like there is nothing we can do without getting flamed.
checkout our vid, spools instantly. yeah but can it spool at 2k rpm to 23psi?
We made 465WHP, yeah but the motor will probably blow up.
Our kit made 400WHP on a customers car. yeah but I bet it won't on another dyno
We just outdid any TVS car by like 100WHP. yeah but the TVS isn't tuned.
Our kit makes 350ft lbs, yeah but you won't be able to launch.
Check out this dyno. yeah but you don't have the rpm.
Here's on with rpm. yeah but it doesn't go down to 2k
The list never ends, it's like hater central around here. WTF do we have to do for some respect and props?
The Hahn kit making 360WHP doesn't reach spool til 4500 rpm. I'm not sure why we have so many haters on this forum but it's getting out of hand. I feel like there is nothing we can do without getting flamed.
checkout our vid, spools instantly. yeah but can it spool at 2k rpm to 23psi?
We made 465WHP, yeah but the motor will probably blow up.
Our kit made 400WHP on a customers car. yeah but I bet it won't on another dyno
We just outdid any TVS car by like 100WHP. yeah but the TVS isn't tuned.
Our kit makes 350ft lbs, yeah but you won't be able to launch.
Check out this dyno. yeah but you don't have the rpm.
Here's on with rpm. yeah but it doesn't go down to 2k
The list never ends, it's like hater central around here. WTF do we have to do for some respect and props?
#177
Senior Member
iTrader: (1)
http://www.zzperformance.com/miscftp/ZZP-vs-H-Dyno.jpg
The Hahn kit making 360WHP doesn't reach spool til 4500 rpm. I'm not sure why we have so many haters on this forum but it's getting out of hand. I feel like there is nothing we can do without getting flamed.
checkout our vid, spools instantly. yeah but can it spool at 2k rpm to 23psi?
We made 465WHP, yeah but the motor will probably blow up.
Our kit made 400WHP on a customers car. yeah but I bet it won't on another dyno
We just outdid any TVS car by like 100WHP. yeah but the TVS isn't tuned.
Our kit makes 350ft lbs, yeah but you won't be able to launch.
Check out this dyno. yeah but you don't have the rpm.
Here's on with rpm. yeah but it doesn't go down to 2k
The list never ends, it's like hater central around here. WTF do we have to do for some respect and props?
The Hahn kit making 360WHP doesn't reach spool til 4500 rpm. I'm not sure why we have so many haters on this forum but it's getting out of hand. I feel like there is nothing we can do without getting flamed.
checkout our vid, spools instantly. yeah but can it spool at 2k rpm to 23psi?
We made 465WHP, yeah but the motor will probably blow up.
Our kit made 400WHP on a customers car. yeah but I bet it won't on another dyno
We just outdid any TVS car by like 100WHP. yeah but the TVS isn't tuned.
Our kit makes 350ft lbs, yeah but you won't be able to launch.
Check out this dyno. yeah but you don't have the rpm.
Here's on with rpm. yeah but it doesn't go down to 2k
The list never ends, it's like hater central around here. WTF do we have to do for some respect and props?
#178
Senior Member
iTrader: (1)
Join Date: 01-23-06
Location: on here
Posts: 10,731
Likes: 0
Received 0 Likes
on
0 Posts
http://www.zzperformance.com/miscftp/ZZP-vs-H-Dyno.jpg
The Hahn kit making 360WHP doesn't reach spool til 4500 rpm. I'm not sure why we have so many haters on this forum but it's getting out of hand. I feel like there is nothing we can do without getting flamed.
checkout our vid, spools instantly. yeah but can it spool at 2k rpm to 23psi?
We made 465WHP, yeah but the motor will probably blow up.
Our kit made 400WHP on a customers car. yeah but I bet it won't on another dyno
We just outdid any TVS car by like 100WHP. yeah but the TVS isn't tuned.
Our kit makes 350ft lbs, yeah but you won't be able to launch.
Check out this dyno. yeah but you don't have the rpm.
Here's on with rpm. yeah but it doesn't go down to 2k
The list never ends, it's like hater central around here. WTF do we have to do for some respect and props?
The Hahn kit making 360WHP doesn't reach spool til 4500 rpm. I'm not sure why we have so many haters on this forum but it's getting out of hand. I feel like there is nothing we can do without getting flamed.
checkout our vid, spools instantly. yeah but can it spool at 2k rpm to 23psi?
We made 465WHP, yeah but the motor will probably blow up.
Our kit made 400WHP on a customers car. yeah but I bet it won't on another dyno
We just outdid any TVS car by like 100WHP. yeah but the TVS isn't tuned.
Our kit makes 350ft lbs, yeah but you won't be able to launch.
Check out this dyno. yeah but you don't have the rpm.
Here's on with rpm. yeah but it doesn't go down to 2k
The list never ends, it's like hater central around here. WTF do we have to do for some respect and props?
#179
Senior Member
iTrader: (2)
Join Date: 05-31-07
Location: SoCal, Lancaster
Posts: 4,339
Likes: 0
Received 0 Likes
on
0 Posts
cough hater's cough...lol gotta love em, wow it seems that almost everyone is unhappy with the site? its like night and day from when i joined...
not complaining just realizing, i dont need no one to tell me to get the **** out/off, i stay for the entertainment...
but seems like some outstanding #'s for stock intake manifold and head...
not complaining just realizing, i dont need no one to tell me to get the **** out/off, i stay for the entertainment...
but seems like some outstanding #'s for stock intake manifold and head...
Last edited by hungryhip-ccp; 08-07-2008 at 01:51 AM.
#180
http://www.zzperformance.com/miscftp/ZZP-vs-H-Dyno.jpg
The Hahn kit making 360WHP doesn't reach spool til 4500 rpm. I'm not sure why we have so many haters on this forum but it's getting out of hand. I feel like there is nothing we can do without getting flamed.
checkout our vid, spools instantly. yeah but can it spool at 2k rpm to 23psi?
We made 465WHP, yeah but the motor will probably blow up.
Our kit made 400WHP on a customers car. yeah but I bet it won't on another dyno
We just outdid any TVS car by like 100WHP. yeah but the TVS isn't tuned.
Our kit makes 350ft lbs, yeah but you won't be able to launch.
Check out this dyno. yeah but you don't have the rpm.
Here's on with rpm. yeah but it doesn't go down to 2k
The list never ends, it's like hater central around here. WTF do we have to do for some respect and props?
The Hahn kit making 360WHP doesn't reach spool til 4500 rpm. I'm not sure why we have so many haters on this forum but it's getting out of hand. I feel like there is nothing we can do without getting flamed.
checkout our vid, spools instantly. yeah but can it spool at 2k rpm to 23psi?
We made 465WHP, yeah but the motor will probably blow up.
Our kit made 400WHP on a customers car. yeah but I bet it won't on another dyno
We just outdid any TVS car by like 100WHP. yeah but the TVS isn't tuned.
Our kit makes 350ft lbs, yeah but you won't be able to launch.
Check out this dyno. yeah but you don't have the rpm.
Here's on with rpm. yeah but it doesn't go down to 2k
The list never ends, it's like hater central around here. WTF do we have to do for some respect and props?
#181
Couple of questions for zzp...
Which clutch do you recommend for the setup?
Do you recommend upgraded axles, solid mounts, etc?
Any swap of engine internals?
Obviously to accomodate the increase in power these mods need to be done or am I completely wrong?
Which clutch do you recommend for the setup?
Do you recommend upgraded axles, solid mounts, etc?
Any swap of engine internals?
Obviously to accomodate the increase in power these mods need to be done or am I completely wrong?
#183
Senior Member
Absolutely props from me as well, and it is true alot of keyboard jockeys on here are haters and have for the majority never been on a dyno. F'em. I appreciate the R@D you guys are doing and for the products you already offer. I look forward to finding some more of those products to come my way.
Please dont let the haters matter, thats the last thing we need, the sorry few idiots to wreck it for the rest of us by bashing, then having a great vendor leaving or even dropping the SS/SC's.
Most of these idiots think if you put on a CAI your motor is going to go boom, hell, how many fine examples out there are stock motors w/ some serious mods and are doing just fine making plenty of horsepower??? Guess they dont matter. They must be absolute flukes.
Please dont let the haters matter, thats the last thing we need, the sorry few idiots to wreck it for the rest of us by bashing, then having a great vendor leaving or even dropping the SS/SC's.
Most of these idiots think if you put on a CAI your motor is going to go boom, hell, how many fine examples out there are stock motors w/ some serious mods and are doing just fine making plenty of horsepower??? Guess they dont matter. They must be absolute flukes.
#184
Senior Member
iTrader: (1)
Join Date: 07-02-05
Location: West Carrollton (Dayton), OH
Posts: 8,725
Likes: 0
Received 2 Likes
on
2 Posts
http://www.zzperformance.com/miscftp/ZZP-vs-H-Dyno.jpg
The Hahn kit making 360WHP doesn't reach spool til 4500 rpm. I'm not sure why we have so many haters on this forum but it's getting out of hand. I feel like there is nothing we can do without getting flamed.
checkout our vid, spools instantly. yeah but can it spool at 2k rpm to 23psi?
We made 465WHP, yeah but the motor will probably blow up.
Our kit made 400WHP on a customers car. yeah but I bet it won't on another dyno
We just outdid any TVS car by like 100WHP. yeah but the TVS isn't tuned.
Our kit makes 350ft lbs, yeah but you won't be able to launch.
Check out this dyno. yeah but you don't have the rpm.
Here's on with rpm. yeah but it doesn't go down to 2k
The list never ends, it's like hater central around here. WTF do we have to do for some respect and props?
The Hahn kit making 360WHP doesn't reach spool til 4500 rpm. I'm not sure why we have so many haters on this forum but it's getting out of hand. I feel like there is nothing we can do without getting flamed.
checkout our vid, spools instantly. yeah but can it spool at 2k rpm to 23psi?
We made 465WHP, yeah but the motor will probably blow up.
Our kit made 400WHP on a customers car. yeah but I bet it won't on another dyno
We just outdid any TVS car by like 100WHP. yeah but the TVS isn't tuned.
Our kit makes 350ft lbs, yeah but you won't be able to launch.
Check out this dyno. yeah but you don't have the rpm.
Here's on with rpm. yeah but it doesn't go down to 2k
The list never ends, it's like hater central around here. WTF do we have to do for some respect and props?
#186
Supporting Vendor
iTrader: (1)
totally stock internals, yes the cars should have axles and clutches but we haven't experimented with any to make a recommendation.
#189
Senior Member
http://www.zzperformance.com/miscftp/ZZP-vs-H-Dyno.jpg
The Hahn kit making 360WHP doesn't reach spool til 4500 rpm. I'm not sure why we have so many haters on this forum but it's getting out of hand. I feel like there is nothing we can do without getting flamed.
checkout our vid, spools instantly. yeah but can it spool at 2k rpm to 23psi?
We made 465WHP, yeah but the motor will probably blow up and what will it make on a customer's car?
Our kit made 400WHP on a customers car. yeah but I bet it won't on another dyno
We just outdid any TVS car by like 100WHP. yeah but the TVS isn't tuned.
Our kit makes 350ft lbs, yeah but you won't be able to launch.
Check out this dyno. yeah but you don't have the rpm.
Here's on with rpm. yeah but it doesn't go down to 2k
The list never ends, it's like hater central around here. WTF do we have to do for some respect and props?
The Hahn kit making 360WHP doesn't reach spool til 4500 rpm. I'm not sure why we have so many haters on this forum but it's getting out of hand. I feel like there is nothing we can do without getting flamed.
checkout our vid, spools instantly. yeah but can it spool at 2k rpm to 23psi?
We made 465WHP, yeah but the motor will probably blow up and what will it make on a customer's car?
Our kit made 400WHP on a customers car. yeah but I bet it won't on another dyno
We just outdid any TVS car by like 100WHP. yeah but the TVS isn't tuned.
Our kit makes 350ft lbs, yeah but you won't be able to launch.
Check out this dyno. yeah but you don't have the rpm.
Here's on with rpm. yeah but it doesn't go down to 2k
The list never ends, it's like hater central around here. WTF do we have to do for some respect and props?
#190
Senior Member
Join Date: 04-04-08
Location: Toledo, OH
Posts: 977
Likes: 0
Received 0 Likes
on
0 Posts
personally i love EVERYTHING about this set up. IF i would of had the 3.5k laying around I would of been one of the first to get this done
after i see a few street videos, get some up close and in-dept shots of the set up, hear how well it works day to day, then come this spring when i get my hefty bonus check, i'll be at the shop.
after i see a few street videos, get some up close and in-dept shots of the set up, hear how well it works day to day, then come this spring when i get my hefty bonus check, i'll be at the shop.
#191
Senior Member
Join Date: 02-05-06
Location: Kakabeka Falls, Ontario
Posts: 727
Likes: 0
Received 0 Likes
on
0 Posts
http://www.zzperformance.com/miscftp/ZZP-vs-H-Dyno.jpg
The Hahn kit making 360WHP doesn't reach spool til 4500 rpm. I'm not sure why we have so many haters on this forum but it's getting out of hand. I feel like there is nothing we can do without getting flamed.
checkout our vid, spools instantly. yeah but can it spool at 2k rpm to 23psi?
We made 465WHP, yeah but the motor will probably blow up and what will it make on a customer's car?
Our kit made 400WHP on a customers car. yeah but I bet it won't on another dyno
We just outdid any TVS car by like 100WHP. yeah but the TVS isn't tuned.
Our kit makes 350ft lbs, yeah but you won't be able to launch.
Check out this dyno. yeah but you don't have the rpm.
Here's on with rpm. yeah but it doesn't go down to 2k
The list never ends, it's like hater central around here. WTF do we have to do for some respect and props?
The Hahn kit making 360WHP doesn't reach spool til 4500 rpm. I'm not sure why we have so many haters on this forum but it's getting out of hand. I feel like there is nothing we can do without getting flamed.
checkout our vid, spools instantly. yeah but can it spool at 2k rpm to 23psi?
We made 465WHP, yeah but the motor will probably blow up and what will it make on a customer's car?
Our kit made 400WHP on a customers car. yeah but I bet it won't on another dyno
We just outdid any TVS car by like 100WHP. yeah but the TVS isn't tuned.
Our kit makes 350ft lbs, yeah but you won't be able to launch.
Check out this dyno. yeah but you don't have the rpm.
Here's on with rpm. yeah but it doesn't go down to 2k
The list never ends, it's like hater central around here. WTF do we have to do for some respect and props?
#192
Senior Member
Join Date: 06-13-07
Location: Woodbridge, ON
Posts: 1,161
Likes: 0
Received 0 Likes
on
0 Posts
quite possibly so... keep up the good work