Twin Screw Supercharger!!
#12
ok, I'll give you guys an update a week, but it should be very soon.
Just finished testing a machined piece on the lower intake manifold as we will be making a dual pass end plate made from Billet AL. You can imagine how hard it is to measure a cast piece with 11 holes in it to 0.001" accuracy.
Going to the CNC shop 2moro to start machining the end plates.
Just finished testing a machined piece on the lower intake manifold as we will be making a dual pass end plate made from Billet AL. You can imagine how hard it is to measure a cast piece with 11 holes in it to 0.001" accuracy.
Going to the CNC shop 2moro to start machining the end plates.
#13
Newfound Faith
ok, I'll give you guys an update a week, but it should be very soon.
Just finished testing a machined piece on the lower intake manifold as we will be making a dual pass end plate made from Billet AL. You can imagine how hard it is to measure a cast piece with 11 holes in it to 0.001" accuracy.
Going to the CNC shop 2moro to start machining the end plates.
Just finished testing a machined piece on the lower intake manifold as we will be making a dual pass end plate made from Billet AL. You can imagine how hard it is to measure a cast piece with 11 holes in it to 0.001" accuracy.
Going to the CNC shop 2moro to start machining the end plates.
Thanks for stepping in on this one. Don't hurry the process to the point of getting something wrong just so you can get this monkey off your back. I appreciate you taking the time to make it right. My only gripe was, as stated before, the lack of progress reports. You and I have exchanged PM's and now I'm up to date. That makes me feel a lot better. Not as good as having a fully functioning kit arrive on my doorstep ofcourse.
I think the guys at TAG are a good bunch of guys that just got a little ahead of themselves when they started the promotion on this project. Unfortunately, as with any new idea, there were unexpected obstacles and it ended up being more work than originally planned.
I'm due to get back home from this deployment in July. Maybe it'll be my coming home present (fingers crossed).
#16
Thanks for the update, very few are still with you on this mase, however you do have a dedicated group to you that you and the guys at TAG will finish this kit and it will eventually be for sale. And i will buy one. Twinscrew FTMFW!!!!!!!!!!!!!!
#20
I'll believe it's "in the works" when I get a progress update. They don't answer emails and when I call unfortunately I don't speak fax. Check that thread, or any thread for that matter, for the last time TAG posted anything in reference to this. Then tell me it's "in the works".
#23
please lil man, you should be thanking me again, because I did as you asked. Fickle #2 lost his faith and than started talking ****.
if you think u're pathetic attempts to insult me have any affect, you're even more of a fool than everyone says you are.
BTW next post try not to talk about ur ass and poop, you could be percieved as a homo
.......NEXT!
if you think u're pathetic attempts to insult me have any affect, you're even more of a fool than everyone says you are.
BTW next post try not to talk about ur ass and poop, you could be percieved as a homo
.......NEXT!
#24
#25
Latest and greatest from Mase
I tried getting an update from Mase and this is what I got. Take note of how I wrote to him and then his idea of how to talk to a customer .
will have some pics up tonight
What happened to this? Then you wonder why people are ticked off. You try to state your case on how long things take when people don't even complain about that. They complain about your inability to follow-up and follow through. If you've had time to post other things in the forum then you've had time to post the pics that you said you would. Try being a man of your word. You'll end up better off in life.
I need honesty from you right now because I'm about at the end of my rope with this thing. Give me some kind of idea, within reason, how much longer you expect this thing to take. I want reality, not just some figure pulled out of a smelly orifice. What work do you still need to accomplish? What parts are you needing? What is in between where you are right now and the final product?
I haven't completely lost faith in you yet, but my patience and tolerance is wearing thin. Now I could have just gone off on you in a rant with cursing and such but I'm hoping that you'll respond to a mature, adult approach with favorable answers.
Thanks in advance for your time.
Ernie Torres
yea my CNC guy didn't have a chance to finish the endplates, do you want a pic of an AL block??
You know what I sick and tired of constantly having to report to you, **** I'm doing this out of my own time and have invested money out of my own pocket to get her done. So I recommend you sit back and shut the **** up or get your money back from TAG.
I'm going to make sure you're the last one out of the 6 to get your kit.
Originally Posted by Mase
Originally Posted by Jumpin Fool
Originally Posted by Mase
Originally Posted by Jumpin Fool
Saw you on and just wanted to know if there was anything new with the twinscrew.
I need honesty from you right now because I'm about at the end of my rope with this thing. Give me some kind of idea, within reason, how much longer you expect this thing to take. I want reality, not just some figure pulled out of a smelly orifice. What work do you still need to accomplish? What parts are you needing? What is in between where you are right now and the final product?
I haven't completely lost faith in you yet, but my patience and tolerance is wearing thin. Now I could have just gone off on you in a rant with cursing and such but I'm hoping that you'll respond to a mature, adult approach with favorable answers.
Thanks in advance for your time.
Ernie Torres
yea my CNC guy didn't have a chance to finish the endplates, do you want a pic of an AL block??
You know what I sick and tired of constantly having to report to you, **** I'm doing this out of my own time and have invested money out of my own pocket to get her done. So I recommend you sit back and shut the **** up or get your money back from TAG.
I'm going to make sure you're the last one out of the 6 to get your kit.