victory_red_SS goes RWD
#1557
Senior Member
Join Date: 08-09-07
Location: minnesota
Posts: 1,619
Likes: 0
Received 0 Likes
on
0 Posts
#1558
LSX RWD S/C conversion
Thread Starter
iTrader: (2)
The new "to me" '06 has cai/header/dp/60lb inj/meth/2.6 pulley/machined snout/hurst shifter/wicked tune/Ingalls TD/Eibach springs(to be sold)/shaved badges&trunk plus the quaife/exedy/DSS stage 2 axles/JBP coilover kit/JBP strut bar/JBP crankshaft pulley/dual pass option B and a Fluidyne HE.
Also a Alpine aftermarket stereo wich I will keep only if I can make it work with the steering wheel controls.
As for the cost on the RWD conversion, Greased got it right. I am not going to say.
Lets just call me an idiot and get it over with.
As for that car, the wheel tubs and floor are going in this week. The aluminum racing seats are mounted and late next week it goes to JBP for the turbo brackets as well as some wiring and the running of the brake/fuel lines.
Also a Alpine aftermarket stereo wich I will keep only if I can make it work with the steering wheel controls.
As for the cost on the RWD conversion, Greased got it right. I am not going to say.
Lets just call me an idiot and get it over with.
As for that car, the wheel tubs and floor are going in this week. The aluminum racing seats are mounted and late next week it goes to JBP for the turbo brackets as well as some wiring and the running of the brake/fuel lines.
Last edited by victory_red_SS; 03-28-2008 at 11:19 AM. Reason: Just for you Matty :)
#1559
Senior Member
Join Date: 03-13-08
Location: Palm Beach/Tallahassee, Florida
Posts: 522
Likes: 0
Received 0 Likes
on
0 Posts
I wish you could just snap your fingers and it would all be done!!! This has to be one of the most bad ass projects I have ever heard of!!
#1561
Banned
Join Date: 03-14-06
Location: soon to banned as I am from MANITOBA?
Posts: 3,660
Likes: 0
Received 1 Like
on
1 Post
Glad to see some progress. not thinking of you of course, just your car.....
Well Rod I have an opportunity tomorrow.... PM Sent! It is not a secret everyone. not sure you guys would even care to hear about it that is all and not going to hijack this thread ....LOL
Well Rod I have an opportunity tomorrow.... PM Sent! It is not a secret everyone. not sure you guys would even care to hear about it that is all and not going to hijack this thread ....LOL
#1562
Senior Member
Join Date: 03-13-08
Location: Palm Beach/Tallahassee, Florida
Posts: 522
Likes: 0
Received 0 Likes
on
0 Posts
#1564
Senior Member
Join Date: 08-17-06
Location: Rochester Hills, MI
Posts: 3,795
Likes: 0
Received 0 Likes
on
0 Posts
The new "to me" '06 has cai/header/dp/60lb inj/meth/2.6 pulley/machined snout/hurst shifter/wicked tune/Ingalls TD/Eibach springs(to be sold)/shaved badges&trunk plus the quaife/exedy/DSS stage 2 axles/JBP coilover kit/JBP strut bar/JBP crankshaft pulley. Also a Alpine aftermarket stereo wich I will keep only if I can make it work with the steering wheel controls.
Your now officially my role model i dont know you, but i want what you have, or to put myself in a position to do what your doing when im a little older...
Not to mention have a wife who allows it ...
#1565
Senior Member
iTrader: (5)
The new "to me" '06 has cai/header/dp/60lb inj/meth/2.6 pulley/machined snout/hurst shifter/wicked tune/Ingalls TD/Eibach springs(to be sold)/shaved badges&trunk plus the quaife/exedy/DSS stage 2 axles/JBP coilover kit/JBP strut bar/JBP crankshaft pulley. Also a Alpine aftermarket stereo wich I will keep only if I can make it work with the steering wheel controls.
As for the cost on the RWD conversion, Greased got it right. I am not going to say.
Lets just call me an idiot and get it over with.
As for that car, the wheel tubs and floor are going in this week. The aluminum racing seats are mounted and late next week it goes to JBP for the turbo brackets as well as some wiring and the running of the brake/fuel lines.
As for the cost on the RWD conversion, Greased got it right. I am not going to say.
Lets just call me an idiot and get it over with.
As for that car, the wheel tubs and floor are going in this week. The aluminum racing seats are mounted and late next week it goes to JBP for the turbo brackets as well as some wiring and the running of the brake/fuel lines.
#1566
Senior Member
Join Date: 03-25-08
Location: Bay St Louis MS
Posts: 1,199
Likes: 0
Received 0 Likes
on
0 Posts
I started scrolling through about 88 pages back about 3 hours ago and when i got to this side of the thread I was hoping the damn thing would be finished with a video of it jetting down the track looking like a blurrr..... God that was alot of reading.... Looks sweet... Thanks for keeping it LSJ!!!!
#1567
Senior Member
Join Date: 05-28-07
Location: Reston, VA
Posts: 2,601
Likes: 0
Received 0 Likes
on
0 Posts
The new "to me" '06 has cai/header/dp/60lb inj/meth/2.6 pulley/machined snout/hurst shifter/wicked tune/Ingalls TD/Eibach springs(to be sold)/shaved badges&trunk plus the quaife/exedy/DSS stage 2 axles/JBP coilover kit/JBP strut bar/JBP crankshaft pulley. Also a Alpine aftermarket stereo wich I will keep only if I can make it work with the steering wheel controls.
So i think in about a weeks time we will have some more pictures?
#1568
LSX RWD S/C conversion
Thread Starter
iTrader: (2)
haha wow but for a guy doing what your doing, i guess that is a daily driver in your eyes lol...
Your now officially my role model i dont know you, but i want what you have, or to put myself in a position to do what your doing when im a little older...
Not to mention have a wife who allows it ...
Your now officially my role model i dont know you, but i want what you have, or to put myself in a position to do what your doing when im a little older...
Not to mention have a wife who allows it ...
As for a wife who "allows it", treat her like a queen everyday and she will treat you great too.
I started scrolling through about 88 pages back about 3 hours ago and when i got to this side of the thread I was hoping the damn thing would be finished with a video of it jetting down the track looking like a blurrr..... God that was alot of reading.... Looks sweet... Thanks for keeping it LSJ!!!!
As for the LSJ, it the heart of this project.
What is so strange about this as a daily driver???? This is what I should have done to my first SS/SC and then stopped.
As for my RWD project, once it goes to JBP, I will be getting another set of detailed pictures and I will post them here.
#1571
Senior Member
Join Date: 05-28-07
Location: Reston, VA
Posts: 2,601
Likes: 0
Received 0 Likes
on
0 Posts
Thats a good little loop hole
as for the daily driver comment i was just saying thats a lot of work. Guess i shouldnt have said you have got to be kidding. It sounds amazing though
as for the daily driver comment i was just saying thats a lot of work. Guess i shouldnt have said you have got to be kidding. It sounds amazing though
#1572
The new "to me" '06 has cai/header/dp/60lb inj/meth/2.6 pulley/machined snout/hurst shifter/wicked tune/Ingalls TD/Eibach springs(to be sold)/shaved badges&trunk plus the quaife/exedy/DSS stage 2 axles/JBP coilover kit/JBP strut bar/JBP crankshaft pulley. Also a Alpine aftermarket stereo wich I will keep only if I can make it work with the steering wheel controls.
And you can make the steering controls work with that adapter.
#1573
LSX RWD S/C conversion
Thread Starter
iTrader: (2)
I will track down that adapter.
I am really looking forward to getting this car. It will definitely help me cope while I am waiting for the project to wrap.