Modernceo

Just uploaded a video of our Cobalt SS with the 2.8 blower pulley.

Boost started around 12 psi and creeped up to 15 psi.

Check out acceleration from 100-130.

http://youtube.com/watch?v=vof3VhsyyA4

Mods done at this point :
K&N intake
Vibrant exhaust
SFPH DUB pulley system 2.8 inch

DSMissed

wow, nice! what did it dyno at?

Mattman6

Umm 3.1 pulley?

campo165

ahh, if only cars accelerated as fast as they would without aerodynamic drag...

FryLoch

iTrader: (5)

Ummm... What are we looking at here? This doesnt really tell us anything...

LopsidedJester

i think he thought it was actually driving maybe? definitely a dyno run

Modernceo

With just K&N air intake, Vibrant exhaust and the 2.8 pulley, 234 hp/ 194 torque.

Added the Vibrant header with downpipe and had a solid 240 / 200 torque. The header gave 6 hp, and 3 lbs of torque, but on average gave a solid 7-12 hp and torque across the rest of the powerband.

I posted the dyno chart of the header in the Modern Performance section.

Sorry for the confusion, this run was 2.8.

Heh. True. But regardless.

Sorry to waste your time.
Just wanting to show how the boost built up, and acceleration on the speedometer on the dyno.

I thought some people would find it interesting, and so far, it looks like several people have enjoyed watching the video.

Hah. No, I know when Im driving, and when Im dyno testing a car.

Ive done close to 300-350 dyno tests on various cars, btw.

By showing this video, I was only attempting to show how boost build up, and what boost pressure, and it was fun to show the acceleration.

Yes, I know that the car would not accelerate this fast in the real world because of aerodynamic drag, friction from wheels on pavement, etc. I dont need to be reminded of that, or told that.

This is just for fun guys. Im not trying to brag that this car can accelerate that fast in the real world, and im not trying to brag that Ive got more boost than XX persons car. ONLY for fun. Jeesh you guys need to relax some.

LopsidedJester

it does sound powerful, but the dyno numbers really doesn't seem to be as high of what i'd expect with a 2.8" pulley, but i guess most people have bigger injectors and a tune for a 2.8" or at least GM stage 2. Is it running larger injectors or stock because i'm sure they are maxing out if its stock.

syP

please tell me you have bigger injectors

Avenger626

I was thinking the same thing. I have the 3.0 pulley and am SURE im pushing more horsepower than that. I also have an Injen intake, Header, 3"dp high flow, 3" vibrant exhaust tuned with hp tuners.

USMCFieldMP

iTrader: (1)

Guys, it depends on the dyno... if I HAD to make a bet... I'd bet it was a Mustang Dyno.

Formula96

looked like a dynojet....

braineater

this should be in the video and picture section!

Modernceo

Yup, like I mentioned above, the car has very limited mods.

Intake
Exhaust
2.8 pulley

This was just a test to see how the cars a/f would be, and power levels.
We noticed that the car would run a little lean on the top end, so after this dyno was made, we removed the 2.8 pulley and installed a 3.1, which runs perfectly fine with stock injectors.

I agree, you probably have more power than we do, because with the car running lean on the top end the car was pulling timing. Your HP tuner allows for more fuel, which will create more power because the car wont be pulling timing.

Dynojet.
Ive never used, and will never use a Mustang dyno. Dynojets are the standard for dyno testing in the aftermarket, and I have no need to use a second rate dyno machine.

1gmfanatik

Is this a pull with just the Vibrant cat-back? I didn't watch it yet...I want to hear how mine will sound with the full Vibrant header back exhaust

johnkb8

i liked it!!!!