What am i missing?
#1
Banned
Thread Starter
Join Date: 04-01-07
Location: Braidwood, Illinois
Posts: 7,914
Likes: 0
Received 0 Likes
on
0 Posts
What am i missing?
heres what i'm about to buy Siemens 60# injectors, Ecotec injector harness, GM Belt, Modular Pulley System(2.8"), NGK Iridium IX Spark Plugs)1 step cooler), then gettting it dyno tuned. is there anything i am missing before i buy this stuff?>
1)are the plugs what i should be running?
2)is there anything i am missing that i will need 2 run this setup?
cooling mods will soon be followed by this
bump need help
1)are the plugs what i should be running?
2)is there anything i am missing that i will need 2 run this setup?
cooling mods will soon be followed by this
bump need help
Last edited by Altiery54; 04-08-2008 at 09:07 AM. Reason: Automerged Doublepost
#2
Senior Member
Join Date: 07-08-05
Location: Niceville, FL
Posts: 6,200
Likes: 0
Received 0 Likes
on
0 Posts
heres what i'm about to buy Siemens 60# injectors, Ecotec injector harness, GM Belt, Modular Pulley System(2.8"), NGK Iridium IX Spark Plugs)1 step cooler), then gettting it dyno tuned. is there anything i am missing before i buy this stuff?>
1)are the plugs what i should be running?
2)is there anything i am missing that i will need 2 run this setup?
cooling mods will soon be followed by this
bump need help
1)are the plugs what i should be running?
2)is there anything i am missing that i will need 2 run this setup?
cooling mods will soon be followed by this
bump need help
edit: just saw the cooling mods later part, but I would still get it before I put that on as it will become a pain in the ass to tune on the dyno when it gets hot. I was tuning my buddies car and saw 178-183* IAT2's without the dual pass!
#3
Banned
Thread Starter
Join Date: 04-01-07
Location: Braidwood, Illinois
Posts: 7,914
Likes: 0
Received 0 Likes
on
0 Posts
yep i dont plan on running it a the track more than 2 times every couple weeks and they wont be back to back runs. cooling will be getting takin care of at the begining of may. i will be fine running this without cooling from what i understand, for a few weeks as ppl are running it with no cooling mods at all.
#4
Senior Member
Join Date: 07-08-05
Location: Niceville, FL
Posts: 6,200
Likes: 0
Received 0 Likes
on
0 Posts
yep i dont plan on running it a the track more than 2 times every couple weeks and they wont be back to back runs. cooling will be getting takin care of at the begining of may. i will be fine running this without cooling from what i understand, for a few weeks as ppl are running it with no cooling mods at all.
#5
Senior Member
yep i dont plan on running it a the track more than 2 times every couple weeks and they wont be back to back runs. cooling will be getting takin care of at the begining of may. i will be fine running this without cooling from what i understand, for a few weeks as ppl are running it with no cooling mods at all.
#6
Senior Member
Join Date: 05-19-07
Location: Cheraw, SC
Posts: 625
Likes: 0
Received 0 Likes
on
0 Posts
You don't really need the Iridium plugs (NGK Iridium IX). Just get the same thing in copper and spend less bucks. I used the NGK Iridium IX plugs when I did mine initially. Went to the coppers in less than a week because the car actually felt stronger with them in there. It may have just been my perception of it but felt like a difference to me.
#7
Banned
Thread Starter
Join Date: 04-01-07
Location: Braidwood, Illinois
Posts: 7,914
Likes: 0
Received 0 Likes
on
0 Posts
#8
Senior Member
#9
Banned
Thread Starter
Join Date: 04-01-07
Location: Braidwood, Illinois
Posts: 7,914
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
z28addiction
Wanted - What to buy - All categories
0
09-28-2015 12:03 AM