2.2 ecotec in the uk
#1
New Member
Thread Starter
Join Date: 03-10-09
Location: uk
Posts: 172
Likes: 0
Received 0 Likes
on
0 Posts
2.2 ecotec in the uk
hi, my names Joe and im from the UK.
i currently have a 2.2 ecotec vauxhall vx220:
my current mods are:
current mods
turbo spoiler
turbo side vents
turbo splitters
TAT long diffuser
fog lights converted to air brake cooling pipes
16/17 speedlines with r888 tyres
GAZ adjustable shocks
fast road GEO
engine mount poly-whatever inserts
mintex 1144 (soon to be 1155)
full 2.5" piper exhaust system with 200 cell cat and 4-1 manifold
ported head
+1mm wasted stem valves
piper cams (260 if i remember correctly)
m62 supercharger
75mm intake pipe with a KnN cone
courtenay sport custom remap
let injectors
Full aluminum radiator
small pre rad
lsj header tank
bosch water pump (for pre rad)
gearbox breather with air filter
oil catch tank with air filter
EGR cheater
near future mods
eagle rods
rebore and fit bigger weseco pistons
upgraded fuel pump
Harrop supercharger
double valve springs
fuel swirl tank
full size aluminum pre rad with twin fans
much bigger header tank for pre rad
balance deletion
lightened flywheel
4pot front brakes
harness bar
mog seats or similar
the current bhp at the wheels is 270
however this should be changing to about 360ish soon.
However this is where i need your help...
do any off you lot know what i need to change other than whats listed in future mods above?
any help is much apreciated.
thanks
i currently have a 2.2 ecotec vauxhall vx220:
my current mods are:
current mods
turbo spoiler
turbo side vents
turbo splitters
TAT long diffuser
fog lights converted to air brake cooling pipes
16/17 speedlines with r888 tyres
GAZ adjustable shocks
fast road GEO
engine mount poly-whatever inserts
mintex 1144 (soon to be 1155)
full 2.5" piper exhaust system with 200 cell cat and 4-1 manifold
ported head
+1mm wasted stem valves
piper cams (260 if i remember correctly)
m62 supercharger
75mm intake pipe with a KnN cone
courtenay sport custom remap
let injectors
Full aluminum radiator
small pre rad
lsj header tank
bosch water pump (for pre rad)
gearbox breather with air filter
oil catch tank with air filter
EGR cheater
near future mods
eagle rods
rebore and fit bigger weseco pistons
upgraded fuel pump
Harrop supercharger
double valve springs
fuel swirl tank
full size aluminum pre rad with twin fans
much bigger header tank for pre rad
balance deletion
lightened flywheel
4pot front brakes
harness bar
mog seats or similar
the current bhp at the wheels is 270
however this should be changing to about 360ish soon.
However this is where i need your help...
do any off you lot know what i need to change other than whats listed in future mods above?
any help is much apreciated.
thanks
#5
New Member
Thread Starter
Join Date: 03-10-09
Location: uk
Posts: 172
Likes: 0
Received 0 Likes
on
0 Posts
#7
Senior Member
DO you have an intercooler?? A nice meth injection setup would get you substantial power gains if you are not running an intercooler and moderate gains if you are.
#8
New Member
Thread Starter
Join Date: 03-10-09
Location: uk
Posts: 172
Likes: 0
Received 0 Likes
on
0 Posts
currently have a small charge cooler at the front as we wherent expected this much power, am now just about to fit a full size charge cooler rad with twin fans and doing the inlet manifold mod to cool the beasty charger down
Last edited by joe_589; 03-11-2009 at 12:52 PM. Reason: Automerged Doublepost
#15
New Member
Thread Starter
Join Date: 03-10-09
Location: uk
Posts: 172
Likes: 0
Received 0 Likes
on
0 Posts
its a pain in the ars!
all the radiator, brake servo etc is at the front but it is still full at the back.
however you can take the rear clam off as its all one piece
all the radiator, brake servo etc is at the front but it is still full at the back.
however you can take the rear clam off as its all one piece
#19
New Member
Thread Starter
Join Date: 03-10-09
Location: uk
Posts: 172
Likes: 0
Received 0 Likes
on
0 Posts
yup it is pretty nippy to say the least, but i cant unleash all the 270 ponies until i get the ods and pistons changed..... should be done by mid next month hopefully and then im off to the nurburgring in may to test it out
all i seem to find is just the fuel pump and swirl tank needed... anything else?
all i seem to find is just the fuel pump and swirl tank needed... anything else?