375WHP cobalt tranny problems
#1
New Member
Thread Starter
Join Date: 07-13-09
Location: ohio
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
375WHP cobalt tranny problems
i just got my 2.2 automatic back, and it is turboed on 21 psi. but the problem is, i need to know where i can get a built transmission or if anysites off performance parts for my automatic tranny. converting it to 5 speed i heard is just a waste of time, what do you think?
#2
New Member
Thread Starter
Join Date: 07-13-09
Location: ohio
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
Just got the car yesterday from big three automotive in hinkley Ohio. It's a fully built engine with 20 over weisco pistons and eagle rods. None of those responses helped by the way. I drove the car home last night an when I got home I had no reverse....so I'm guessing the tranny is going. Is there any way to build the auto tranny?
#3
Senior Member
iTrader: (5)
Join Date: 04-06-10
Location: Santa Fe, NM
Posts: 1,743
Likes: 0
Received 0 Likes
on
0 Posts
i just got my 2.2 automatic back, and it is turboed on 21 psi. but the problem is, i need to know where i can get a built transmission or if anysites off performance parts for my automatic tranny. converting it to 5 speed i heard is just a waste of time, what do you think?
#8
Senior Member
Join Date: 09-01-09
Location: oklahoma
Posts: 767
Likes: 0
Received 0 Likes
on
0 Posts
eh dont always have to post a thread on a big build. i never posted mine but its kind of weird to find 25 horses like that. raising your hp line because you forgot the head was done too is kinda weird since at that point how do you know the headwork netted you 25 horses in the first place?
props on a 2.2 pushing that much if you really have one..
but since you asked for help ill help you even though i have this weird smell similar to bullshit flowing out of my speakers.
my suggestion would be to hit your local performance shop. that way they can build your trans the best way to fit YOUR driving. just my opinion
props on a 2.2 pushing that much if you really have one..
but since you asked for help ill help you even though i have this weird smell similar to bullshit flowing out of my speakers.
my suggestion would be to hit your local performance shop. that way they can build your trans the best way to fit YOUR driving. just my opinion
#9
New Member
Thread Starter
Join Date: 07-13-09
Location: ohio
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
Ok car has 350 whp I'm sorry I didn't look at the paper right. We were aiming for 375 but got 350. I don't care about forums to say hey look how cool I am, I just need help with my transmission it blew up in 1 night
#10
Junior Member
Join Date: 05-25-10
Location: Cross Lanes, WV
Posts: 460
Likes: 0
Received 0 Likes
on
0 Posts
you sir are an idiot, and by that I mean uneducated when it comes to cars. It means his motor is bored .20 over, you do this to motorcycles and fourwheels to go from say a 125cc dirtbike to a 150cc dirtbike....ever heard of that? thats usually the way people here "20 over" or "80 over"
#11
New Member
Thread Starter
Join Date: 07-13-09
Location: ohio
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
Hahn intake manifold, custom all welded intercooler piping, 60-1 turbo. Custom flex downpipe. Tiao or how u spell it wastegate. Custom dump pipe. 21 psi. Need suspension and diff tranny. I'm not lying about the car I just need help with my transmission. I'll post a vid on YouTube tonight when i get off work
#14
Good job helping this guy out, . Who cares what he has, if he's belligerent about what he has after you help him, then you can lean into him a bit. Why is it that if it's not on CobaltSS.net that it doesn't exist or didn't happen?
It's a 4T45 right? Shouldn't have too much of a problem finding parts to build it. Talk to some local racers who have auto's and ask them about who has a good transmission shop in your area. It's not going to be cheap but you probably already knew that.
It's a 4T45 right? Shouldn't have too much of a problem finding parts to build it. Talk to some local racers who have auto's and ask them about who has a good transmission shop in your area. It's not going to be cheap but you probably already knew that.
#16
Senior Member
iTrader: (9)
Join Date: 01-08-09
Location: sTackin ciTy, CA
Posts: 1,252
Likes: 0
Received 0 Likes
on
0 Posts
you sir are an idiot, and by that I mean uneducated when it comes to cars. It means his motor is bored .20 over, you do this to motorcycles and fourwheels to go from say a 125cc dirtbike to a 150cc dirtbike....ever heard of that? thats usually the way people here "20 over" or "80 over"
#17
Senior Member
iTrader: (4)
Join Date: 01-27-10
Location: Omaha, Nebraska
Posts: 1,234
Likes: 0
Received 0 Likes
on
0 Posts
Just got the car yesterday from big three automotive in hinkley Ohio. It's a fully built engine with 20 over weisco pistons and eagle rods. None of those responses helped by the way. I drove the car home last night an when I got home I had no reverse....so I'm guessing the tranny is going. Is there any way to build the auto tranny?
certified transmission has thier predator brand trannies that are meant to hold up to a lot of abuse give them a call and see if they have one for the cobalt.
#19
Senior Member
Join Date: 09-01-09
Location: oklahoma
Posts: 767
Likes: 0
Received 0 Likes
on
0 Posts
Good job helping this guy out, . Who cares what he has, if he's belligerent about what he has after you help him, then you can lean into him a bit. Why is it that if it's not on CobaltSS.net that it doesn't exist or didn't happen?
It's a 4T45 right? Shouldn't have too much of a problem finding parts to build it. Talk to some local racers who have auto's and ask them about who has a good transmission shop in your area. It's not going to be cheap but you probably already knew that.
It's a 4T45 right? Shouldn't have too much of a problem finding parts to build it. Talk to some local racers who have auto's and ask them about who has a good transmission shop in your area. It's not going to be cheap but you probably already knew that.
i told him to goto the local trans performance trans shops to see what they could.
twice actually. its not my fault he cant read when someone actually does decide to quit giving him **** and help. but i appreciate the criticism.
#20
New Member
Join Date: 07-18-08
Location: West Chester, OH
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
#22
Senior Member
iTrader: (10)
This is what's wrong with this site. Guy comes in with a legit question, everyone who has no buisness being in the thread anyway decides to be a ******* comeidan.
If you can't help, gtfo. Why doubt his work? Because you haven't done it? You chase away people who aren't afraid to do work on the car, because you've never seen it done. Maybe if you were helpful or shut the **** up and listened, you'd see what he did and believe it.
If you can't help, gtfo. Why doubt his work? Because you haven't done it? You chase away people who aren't afraid to do work on the car, because you've never seen it done. Maybe if you were helpful or shut the **** up and listened, you'd see what he did and believe it.
#23
Senior Member
iTrader: (1)
This is what's wrong with this site. Guy comes in with a legit question, everyone who has no buisness being in the thread anyway decides to be a ******* comeidan.
If you can't help, gtfo. Why doubt his work? Because you haven't done it? You chase away people who aren't afraid to do work on the car, because you've never seen it done. Maybe if you were helpful or shut the **** up and listened, you'd see what he did and believe it.
If you can't help, gtfo. Why doubt his work? Because you haven't done it? You chase away people who aren't afraid to do work on the car, because you've never seen it done. Maybe if you were helpful or shut the **** up and listened, you'd see what he did and believe it.
4T40-E / 4T45-E Performance Transmission
#24
Senior Member
iTrader: (12)
This is what's wrong with this site. Guy comes in with a legit question, everyone who has no buisness being in the thread anyway decides to be a ******* comeidan.
If you can't help, gtfo. Why doubt his work? Because you haven't done it? You chase away people who aren't afraid to do work on the car, because you've never seen it done. Maybe if you were helpful or shut the **** up and listened, you'd see what he did and believe it.
If you can't help, gtfo. Why doubt his work? Because you haven't done it? You chase away people who aren't afraid to do work on the car, because you've never seen it done. Maybe if you were helpful or shut the **** up and listened, you'd see what he did and believe it.