FOR THE CAMMED COBALT's
#1
Premium Member
Thread Starter
Join Date: 10-27-07
Location: Columbia, MO
Posts: 826
Likes: 0
Received 0 Likes
on
0 Posts
FOR THE CAMMED COBALT's
Well today I installed a 2.4 TB and the rough starts are a little smoother. With a few tweaks in the tune Vince has the car running brand new (with cams). Surging when coming to a stop, is no more.
As for the start ups. My car ran lean so the more fuel that is added at start up the less surging of the engine wanting to die.
Now it is not perfect but way way way better than what it was before hand.
Give me a couple of days to make sure. but as of now the car runs great.
If your going to get cams i would have to say have the 2.4 manifold and the 2.4 TB.
world of difference
As for the start ups. My car ran lean so the more fuel that is added at start up the less surging of the engine wanting to die.
Now it is not perfect but way way way better than what it was before hand.
Give me a couple of days to make sure. but as of now the car runs great.
If your going to get cams i would have to say have the 2.4 manifold and the 2.4 TB.
world of difference
Last edited by copson20; 01-12-2009 at 05:01 PM.
#4
Premium Member
Thread Starter
Join Date: 10-27-07
Location: Columbia, MO
Posts: 826
Likes: 0
Received 0 Likes
on
0 Posts
#5
Senior Member
Join Date: 01-05-08
Location: Vancouver, B.C.
Posts: 841
Likes: 0
Received 0 Likes
on
0 Posts
#7
Premium Member
Thread Starter
Join Date: 10-27-07
Location: Columbia, MO
Posts: 826
Likes: 0
Received 0 Likes
on
0 Posts
#9
Premium Member
Thread Starter
Join Date: 10-27-07
Location: Columbia, MO
Posts: 826
Likes: 0
Received 0 Likes
on
0 Posts
and or yours you can bore it out and adjust your TB blade with a screw driver i believe. OLD SCHOOL. not all this bossy ****. computer taking overLOL
#16
Senior Member
Join Date: 07-15-05
Location: Ontario, Canada
Posts: 7,639
Likes: 0
Received 0 Likes
on
0 Posts
#18
Premium Member
Thread Starter
Join Date: 10-27-07
Location: Columbia, MO
Posts: 826
Likes: 0
Received 0 Likes
on
0 Posts
No i dont.... But it was easy just bolted right up to the Manifold. But i do have a spacer on mine. if i get time ill take a pic.
#22
Premium Member
Thread Starter
Join Date: 10-27-07
Location: Columbia, MO
Posts: 826
Likes: 0
Received 0 Likes
on
0 Posts
Ready for that Race LOL
#23
Senior Member
iTrader: (4)
Join Date: 09-02-07
Location: MP, PA (S of Pittsburgh)
Posts: 4,532
Likes: 0
Received 0 Likes
on
0 Posts
I KNOW MAN!!! you have no idea how good it feels just to start the car and BAM instant idle. I got it down to 900 RPM idle now with no problem and when i drive its not jumpy when i come to a stop. Now since it is cold here it idles high to warm up but then it drops to 900. still working with vince you adjust everything to get a tune for everyone. the last thing i want on my mind is it not to work and everyone bought 2.4TB and manifold. LOL I'll feel real shitty then.
Ready for that Race LOL
Ready for that Race LOL
#24
Senior Member
Join Date: 08-20-07
Location: Irwin, Pa (S of Pittsburgh)
Posts: 2,061
Likes: 0
Received 0 Likes
on
0 Posts
Nice work man. That is what I've been tryin to tell MP cobalt lol but I didn't know for sure or have proof that it'd be better. Go Dyno that beast sometime to see what dif you got