ebay intake for less....
#82
Senior Member
Join Date: 06-16-07
Location: Marion,Ohio
Posts: 1,137
Likes: 0
Received 0 Likes
on
0 Posts
#83
Senior Member
Join Date: 09-06-06
Location: Upper Golden Grove. NB
Posts: 731
Likes: 0
Received 0 Likes
on
0 Posts
From: Rick
To: 'BRETTCHEVROLETCADILLAC NB'
Sent: Friday, February 01, 2008 5:26 PM
Subject: RE: cold air intake
Hello Chris
The cold air intake will not void the warranty. The GM ones should be around the same price as the after market ones and work as good or better, come in to the store and see us, and we will give you a price on the intake and the job if you would like. If you would like to bring the after market one in to have installed by us that is ok too, or if you want to show myself what you are putting on and get the info on warranty come in and see me
Rick Keirstead
To: 'BRETTCHEVROLETCADILLAC NB'
Sent: Friday, February 01, 2008 5:26 PM
Subject: RE: cold air intake
Hello Chris
The cold air intake will not void the warranty. The GM ones should be around the same price as the after market ones and work as good or better, come in to the store and see us, and we will give you a price on the intake and the job if you would like. If you would like to bring the after market one in to have installed by us that is ok too, or if you want to show myself what you are putting on and get the info on warranty come in and see me
Rick Keirstead
#84
Senior Member
Thread Starter
Join Date: 12-21-07
Location: lucedale, ms
Posts: 3,741
Likes: 0
Received 0 Likes
on
0 Posts
yeah i was told not to long ago that the only way they could void your warranty for an intake of different filter was if they supplied you with free filters when you need em..
#86
Senior Member
Thread Starter
Join Date: 12-21-07
Location: lucedale, ms
Posts: 3,741
Likes: 0
Received 0 Likes
on
0 Posts
hes looks like it is but mine is bout a 1/2in from touchin.. its all in how you put it together.. i had to play with mine and adjust it a few times to get it away from the body like that..
#87
Senior Member
iTrader: (7)
Join Date: 06-10-06
Location: Omaha, NE
Posts: 3,021
Likes: 0
Received 0 Likes
on
0 Posts
Mine finally arrived tonight. Gunna put it on friday as I have fog light grill inserts to install as well. I would just add a piece of rubber weather stripping to that part of the body to prevent it from scratching up real bad.
#88
Senior Member
iTrader: (1)
Join Date: 01-25-08
Location: INLAND EMPIRE
Posts: 551
Likes: 0
Received 0 Likes
on
0 Posts
i was installing my last night. not the best thing to do in the dark, but i finished it exept for this one hose that i couldnt figure out were it went? i did plug in the sensor and the small little hose that goes to the top of the engine. the hose i cant figure out start from the back of the radiator attached to the engine, and goes up to towards the left side. i have the 2.2l
Anyone?
Anyone?
Last edited by WHITE G5; 02-07-2008 at 01:27 PM. Reason: Automerged Doublepost
#90
Senior Member
Join Date: 06-16-07
Location: Marion,Ohio
Posts: 1,137
Likes: 0
Received 0 Likes
on
0 Posts
i was installing my last night. not the best thing to do in the dark, but i finished it exept for this one hose that i couldnt figure out were it went? i did plug in the sensor and the small little hose that goes to the top of the engine. the hose i cant figure out start from the back of the radiator attached to the engine, and goes up to towards the left side. i have the 2.2l
Anyone?
Anyone?
Here's a SAI thread
#93
Senior Member
i was installing my last night. not the best thing to do in the dark, but i finished it exept for this one hose that i couldnt figure out were it went? i did plug in the sensor and the small little hose that goes to the top of the engine. the hose i cant figure out start from the back of the radiator attached to the engine, and goes up to towards the left side. i have the 2.2l
Anyone?
Anyone?
I installed an intake on my friends car and left it hanging in the engine bay
#94
Senior Member
Join Date: 01-19-07
Location: San Antonio TX
Posts: 2,511
Likes: 0
Received 0 Likes
on
0 Posts
For the lazy people like me
Linky:http://advancedjdmparts.com/product.php?productid=19767
EDIT: AEM SS/SC intake, looks like a good price as well but don't know the average price.
Linky: http://advancedjdmparts.com/product.php?productid=18193
Linky:http://advancedjdmparts.com/product.php?productid=19767
EDIT: AEM SS/SC intake, looks like a good price as well but don't know the average price.
Linky: http://advancedjdmparts.com/product.php?productid=18193
#96
Senior Member
#98
Senior Member
I guess I'm going to have to reinstall my liner.
I was backing up this past summer and I hit a small pot hole and the car ran over it's own mudflap, tearing out the entire liner (since it's all one peice)
Last edited by HackAbuse; 02-07-2008 at 03:27 PM. Reason: Automerged Doublepost
#100
Senior Member
Just ordered mine, came to $45 shipped
I had an injen before, so I have something to compare too
I'll have to reinstall my wheel well liner probably tomorrow
Last edited by HackAbuse; 02-07-2008 at 03:38 PM. Reason: Automerged Doublepost