Headers
#1
New Member
Thread Starter
Join Date: 10-12-05
Location: Tallahassee
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Headers
Can anyonen suggest a good ceramic header for my 05 cobalt? hopefully around $500- $700. And does anyone know where I could get an racing chip/ECU?
#3
I'm old school
I'm not at my home computer, otherwise I could give you list of exhaust manifold manufacturers. There are few of them out there and not hard to find with a simple internet search. I haven't seen and chip upgrade yet, and you probably won't. Our cars are more marketed for programmers. You would need to get a programmable fuel computer, like a hypertech or Greddy.
#4
Senior Member
Join Date: 06-14-05
Location: phoenix , az
Posts: 1,130
Likes: 0
Received 0 Likes
on
0 Posts
no chip or programing for the cobalts
and there is a header coming that will be less expensive , talk to jim at gravana tuning about it , the headers should be ready soon
gravana tuning is a supporting dealer also
and there is a header coming that will be less expensive , talk to jim at gravana tuning about it , the headers should be ready soon
gravana tuning is a supporting dealer also
#5
Senior Member
Join Date: 06-08-05
Location: U.S.A.
Posts: 2,152
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by celicacobalt
not headers theres only one on this car and i dont think there is a specific cobalt design yet but you can try and fit some off the cavy's
#6
Senior Member
Join Date: 05-26-05
Location: Pittsburgh, PA
Posts: 6,375
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by CobaltBurst
try not to just bash people for the hell of it.... the title says "headers" meaning different ones, not more than one for the car, notice his message HEADER??? leave him be...
#7
Senior Member
Join Date: 08-02-05
Location: London
Posts: 1,668
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by celicacobalt
i was just kidding with him i should have out a lol after it, sorry
you totally wern't you were trying to sound like a smart ass
but back on topic gravana has a great rep so check out what they have to say
#8
Senior Member
iTrader: (1)
whoa there, everyone needs to count to ten really slowly before they post again....
I'm interested in finding out which header I should get as well. I still have mine from my 04 Cavy. It was pacesetters I believe. Would that work well, or should I just sell that one and get a new one?
I'm interested in finding out which header I should get as well. I still have mine from my 04 Cavy. It was pacesetters I believe. Would that work well, or should I just sell that one and get a new one?
#10
New Member
Thread Starter
Join Date: 10-12-05
Location: Tallahassee
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Yeah gravana just posted two different "headers" but I think I'm going to go with the ceramic one. Don't worry about it man I didn't take any offense to it but yes I meant headers because I was talking about different ones. Thanks for the help guys. Does anybody know what kind of horsepower gains I could expect for good headers?
#13
I'm old school
Originally Posted by T-bone
I thought the dif between the 2.0 and the 2.2 is the crankshaft stroke ,if so a header should fit either. am I wrong?
#17
Senior Member
Join Date: 07-22-05
Location: Quebec City, Quebec
Posts: 1,591
Likes: 0
Received 0 Likes
on
0 Posts
#18
I'm old school
Originally Posted by celicacobalt
it expels the gases from the engine after they have been burned and they come out of the muffler
Its the first piece on the right side of the picture. The next part is the flexible down pipe that allows movement between the engine and the rest of the pipe. Then is the catalytic converter. The remainer of the system is not pictured.
#19
hey aaron,
I was planing on picking up one of your headers. is the price you have listed the pre sale price or normal price. and do you have a more precise date on shipping?
I was planing on picking up one of your headers. is the price you have listed the pre sale price or normal price. and do you have a more precise date on shipping?
#20
Former Vendor
iTrader: (24)
Originally Posted by forcedgminduction
hey aaron,
I was planing on picking up one of your headers. is the price you have listed the pre sale price or normal price. and do you have a more precise date on shipping?
I was planing on picking up one of your headers. is the price you have listed the pre sale price or normal price. and do you have a more precise date on shipping?
Thread
Thread Starter
Forum
Replies
Last Post
z28addiction
Wanted - What to buy - All categories
0
09-28-2015 12:03 AM