Just ordered stage 2 cams
#26
Senior Member
Join Date: 12-18-07
Location: Methuen, MA
Posts: 899
Likes: 0
Received 0 Likes
on
0 Posts
#28
Member
Thread Starter
Join Date: 09-15-06
Location: Foristell, MO
Posts: 298
Likes: 0
Received 0 Likes
on
0 Posts
Yeah i decided im just gonna get the cams and drop em in. I talked to like 3 companies and they all said i'll be fine with the stock springs so. I can't wait for the cams to get here.
#30
Member
Thread Starter
Join Date: 09-15-06
Location: Foristell, MO
Posts: 298
Likes: 0
Received 0 Likes
on
0 Posts
Latest update: Turbotech informed me that the cams will be ready no later than June 7th. Im pretty excited. I was talking to this guy at my dealership that flushed my transmission fluid about the cams and I'm just going to have him put them in because he works with this engine all day and he knows what he's doing. He even showed me this diagram of how all the alignment marks meet up. It was cool and I will feel confident having him put them in so. So far I feel that I have planned everything well, I have a brand new valve cover gasket, I will also have some new spark plugs to go in, and while the valve cover is off, im going to polish it. Tuning is taken care of by trifecta, at which the same time I will also be getting the tune for the automatic trans. So I'm guesstimating that I will gain at least 1 second if not more in the 1/4 mile. From what i have seen stage 1 gains about 10-15 horsepower so that means stage 2 has to gain at least 20-25 horsepower. After the whole job is done i'm going to get it dynoed just to see at which RPM its gaining the most horsepower.
#32
Latest update: Turbotech informed me that the cams will be ready no later than June 7th. Im pretty excited. I was talking to this guy at my dealership that flushed my transmission fluid about the cams and I'm just going to have him put them in because he works with this engine all day and he knows what he's doing. He even showed me this diagram of how all the alignment marks meet up. It was cool and I will feel confident having him put them in so. So far I feel that I have planned everything well, I have a brand new valve cover gasket, I will also have some new spark plugs to go in, and while the valve cover is off, im going to polish it. Tuning is taken care of by trifecta, at which the same time I will also be getting the tune for the automatic trans. So I'm guesstimating that I will gain at least 1 second if not more in the 1/4 mile. From what i have seen stage 1 gains about 10-15 horsepower so that means stage 2 has to gain at least 20-25 horsepower. After the whole job is done i'm going to get it dynoed just to see at which RPM its gaining the most horsepower.
#33
Latest update: Turbotech informed me that the cams will be ready no later than June 7th. Im pretty excited. I was talking to this guy at my dealership that flushed my transmission fluid about the cams and I'm just going to have him put them in because he works with this engine all day and he knows what he's doing. He even showed me this diagram of how all the alignment marks meet up. It was cool and I will feel confident having him put them in so. So far I feel that I have planned everything well, I have a brand new valve cover gasket, I will also have some new spark plugs to go in, and while the valve cover is off, im going to polish it. Tuning is taken care of by trifecta, at which the same time I will also be getting the tune for the automatic trans. So I'm guesstimating that I will gain at least 1 second if not more in the 1/4 mile. From what i have seen stage 1 gains about 10-15 horsepower so that means stage 2 has to gain at least 20-25 horsepower. After the whole job is done i'm going to get it dynoed just to see at which RPM its gaining the most horsepower.
#34
Member
Thread Starter
Join Date: 09-15-06
Location: Foristell, MO
Posts: 298
Likes: 0
Received 0 Likes
on
0 Posts
LATEST: I just recieved my cams today in the mail. So im gonna go ahead and order the tune, and then next week i will be getting them installed. I can't wait.
#36
Senior Member
Join Date: 11-24-07
Location: Griffith, Indiana
Posts: 1,762
Likes: 0
Received 0 Likes
on
0 Posts
#37
Senior Member
iTrader: (6)
the wife said i can boost the cobalt so i'm gonna keep my love, if you don't mind. the cooper was her idea cause she liked the boost so much but we'd spend better money boosting my cobalt and staying away from the bigger car payment. ha. still want to ditch the juice though.
Thread
Thread Starter
Forum
Replies
Last Post