zerosk8ter83

iTrader: (3)

MAP To Intake Manifold
M6 x 1.0 x 25 (Qty 1)

LSJ Intake Manifold Mount Bracket To Intake Manifold
M10 X 1.50 x 50 (Qty 1)

LSJ Rear IC Pump Bracket To Intake Manifold Mount
M8 X 1.25 X 25 – (Qty 2)

LSJ Front IC Pump Bracket To Rear IC Pump Bracket
M8 X 1.25 X 35 – (Qty 2)

LSJ Idler Pulley To Alternator Bracket
M8 x 1.25 x 25

LSJ Intake Manifold To Block
M6 x 1.0 X 75 (Qty 2)
M6 x 1.0 x 25 (Qty 5)

LSJ Alternator Bracket To Block
M8 X 1.25 X 130 (Qty 3)

LSJ SC Bypass Valve To SC
M8 X 1.25 X 20 (Qty 2)

LSJ Tensioner Lower To Alternator Bracket
M8 x 1.25 x 35

LSJ Tensioner Upper To Alternator Bracket
M8 X 1.25 x 40… not standard bolt though. Has to be metric hex socket bolt.

LSJ SC Reservoir Bracket To SC
M6 x 1.0 x 15 (Qty 2)

LSJ SC Reservoir To SC Reservoir Bracket
M6 x 1.0 x 15 (Qty 2)

heathkidder

iTrader: (20)

just bend it huh lol sounds safe enough as long as it doesnt brake off right

Glowbalt

iTrader: (3)

and some build pics...nvm you just added me..lol..

heathkidder

iTrader: (20)

LSJ Tensioner Upper To Alternator Bracket
M8 X 1.25 x 40… not standard bolt though. Has to be metric hex socket bolt.


is this bolt hard to find? hopefully some bolts come with my kit but im not holding my breath

Glowbalt

iTrader: (3)

no it's not..I found that one at Home Depot

zerosk8ter83

iTrader: (3)

idk i just got the regular one

heathkidder

iTrader: (20)

yeah i did lol also you used the sensor on ur sc right ?? most others dont use that they do it some other way?

Glowbalt

iTrader: (3)

Ya I used the sensor on the SC...Others use the one on the intake manifold...Eh, it works regardless..Not really sure how to hook it up to the other one is all.lol

Glowbalt

iTrader: (3)

BTW..Did it ship out?

heathkidder

iTrader: (20)

yeah that has me confused cause idk mucha bout all the sensors lol

1LowLS

Theres a map sensor port on the intake manifold.Thats where my map sensor is.The top one is just plugged on mine

heathkidder

iTrader: (20)

no i went up there and they damn place was closed cause of presidents day stupid so im wakin up at 8am to ship it i promise lol

heathkidder

iTrader: (20)

wher does the map senosor run to exactly though i mean if u have it runnin to the intake mani from where? and if u run it on the sc where does it go to exactly

Glowbalt

iTrader: (3)

I guess since I've waited this long one more day shouldnt hurt..

heathkidder

iTrader: (20)

so ur map sensor runs from the sc to where exactly

Glowbalt

iTrader: (3)

to the Injector harness..Youll see it once you disconnect everything..It is currently on your stock Intake manifold

heathkidder

iTrader: (20)

so the sensor runs from the intake mani to the injector harness but u ran it to the sc correct

Glowbalt

iTrader: (3)

It's hard to explain..There are 2 sensors, I just used the one on the SC, the other one just sits there and plugs up a hold on the intake manifold(thats how I have it)

heathkidder

iTrader: (20)

so i assume either way will be fine

1LowLS

yes vince can tune it either way apparently.Glowbalts is the 1st ive seen like that

Glowbalt

iTrader: (3)

Yes, i'm just not sure how to rewire it in order to do it the other way..Pretty sure one of the build threads shows how to do it

1LowLS

It doesnt have to be rewired to run it like mine.You just put your stock map sensor in the intake manifold

Glowbalt

iTrader: (3)

For some reason mine didnt fit...

1LowLS

because your 05 or 06.07 and up they fit right in snuggly.your was too loose correct?And are you Auto?

heathkidder

iTrader: (20)

hey im auto but im an 08 so will mine fit if not i need to learn how glowbalt did his lol