Nos Installed Check it out IN my VB
#1
New Member
Thread Starter
Join Date: 04-27-08
Location: New York
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Nos Installed Check it out IN my VB
The N20 is sickkkkkkk it works just like a turbo with my automatic transmission the faster I go the more boost I get along with the sickkk sound it makes when it shifts I payed 1064$ for the kit and professional installation and its nothing but more upgrades from this point on.
#9
Senior Member
This is like crack for motors. It gets them all high and excited, then it makes their teeth rot and look like crap. And the rush is gone so quick and next thing you know you're shelling out another $40 for "just one more shot"
#10
Senior Member
#12
Senior Member
*clears throat* That's how a WET nitrous system works. The line coming off the fuel rail sprays extra fuel into the intake along with the nitrous to make up for the extra fuel needed for the nitrous use. The other line is the obvious.
#17
Senior Member
iTrader: (10)
To the OP-
Not trying to hide that at all, are you. I at least put mine out of plain sight. Hard to hide the fuel supply line, just gotta loom it and hope people don't know what they are looking at.
#18
Senior Member
Join Date: 12-21-07
Location: lucedale, ms
Posts: 3,741
Likes: 0
Received 0 Likes
on
0 Posts
i have to zex kit too. its the 75-150 shot kit. i didnt know he meant the kit and install though. i do all my own work so i never figure that kinda stuff in. where did you put you nozzle at?
and by small i meant smaller shot. i thought it was cheaper that the bigger shot kits.
and by small i meant smaller shot. i thought it was cheaper that the bigger shot kits.
Last edited by yellowltcoupe22; 05-12-2008 at 10:58 PM. Reason: Automerged Doublepost
#20
Senior Member
Join Date: 08-20-07
Location: Irwin, Pa (S of Pittsburgh)
Posts: 2,061
Likes: 0
Received 0 Likes
on
0 Posts
#21
New Member
Thread Starter
Join Date: 04-27-08
Location: New York
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
THanks, Ya i really need to clean up the engine and ya the 1000 included the install its a very nice kit and dammm you notice the difference raced my buddies saturn ion redline beat him clean by a car length.
OOo I meant my SOund system my subs my n2o works great
OOo I meant my SOund system my subs my n2o works great
Last edited by 12 G4UGE; 05-12-2008 at 11:57 PM. Reason: Automerged Doublepost
#22
Senior Member
Join Date: 08-30-05
Location: Delaware
Posts: 1,741
Likes: 0
Received 0 Likes
on
0 Posts
Pretty nice man. Just looked a pic of your car and it looks like I'm going to have to go with some new wheels....you stole mine!!! lol Our cars would look Identical if you had it lowered. haha
#23
Senior Member
iTrader: (1)
Join Date: 07-02-07
Location: Bensenville, IL
Posts: 2,022
Likes: 0
Received 0 Likes
on
0 Posts
ya personally i think it isnt hooked up the way its suppose to me... the nozzle should be 6"-12" away.
i spent about 1200 or so on my kit WITHOUT install... but i got alot of gooodies
bottle warmer, remote bottle opener, n2o pressure guage, n2o command center, blowdown kit, window timer
i spent about 1200 or so on my kit WITHOUT install... but i got alot of gooodies
bottle warmer, remote bottle opener, n2o pressure guage, n2o command center, blowdown kit, window timer
#24
Senior Member
Join Date: 08-30-05
Location: Delaware
Posts: 1,741
Likes: 0
Received 0 Likes
on
0 Posts
^^^ And your running a 50 shot correct? Reason I ask is that I'm abot to start building my motor and am going to be using SS/SC rods and want to run anywhere from a 100 to 150 shot haha. Think they'll hold up?
#25
Senior Member
I think it will hold up just tune your kit to only work at WOT and between high RPM