2.2L L61 Performance Tech 16 valve 145 hp EcoTec with 155 lb-ft of torque

Stock rev limter ?

Thread Tools
 
Search this Thread
 
Old 01-26-2014, 08:00 PM
  #1  
New Member
Thread Starter
 
82chris1's Avatar
 
Join Date: 01-15-14
Location: Windsor
Posts: 49
Likes: 0
Received 0 Likes on 0 Posts
Stock rev limter ?

I put zzp #82 valve springs in and I want to raise the rev limter. What would you guys recommend ?
Old 01-26-2014, 08:21 PM
  #2  
Platinum Member
Platinum Member
 
09CobaltSS1's Avatar
 
Join Date: 04-12-09
Location: Connecticut
Posts: 4,910
Received 15 Likes on 13 Posts
Between 7200-7500 depending on what you have done already or plan on doing. You can go a bit higher, but again, it all depends on what you're doing here. The stock cams will only carry you so far.
Old 01-27-2014, 09:51 PM
  #3  
Senior Member
 
06_ion2's Avatar
 
Join Date: 12-12-06
Location: minnesota
Posts: 2,904
Received 2 Likes on 2 Posts
I rev to 7400 but I don't have just valve springs. I'd do 7200. You won't gain much at all by doing this if your stock.
Old 02-02-2014, 10:30 AM
  #4  
New Member
 
flaminace's Avatar
 
Join Date: 08-08-13
Location: conyers, ga
Posts: 120
Likes: 0
Received 0 Likes on 0 Posts
how strong are the stock rod bolts? i know if they're not strong enough they'll break if you rev too high.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Supercharged06SS
08-10 SS Turbocharged General Discussion
21
12-11-2022 04:47 PM
Zharrington_2010LNF
2.0L LNF Performance Tech
21
02-08-2016 01:43 PM
Jesse
Parts
15
10-13-2015 09:32 PM
Jesse
Stuff
0
10-01-2015 05:47 PM
DocSvensk
2.0L LNF Performance Tech
7
09-27-2015 02:24 PM



Quick Reply: Stock rev limter ?



All times are GMT -4. The time now is 04:25 PM.