NJjon

Screw it. I change my mind like crazy sometimes, but a friend convinced me that turbo would be the best for me. So starting now, all my funds are going to saving up for a turbo, most probably the zzp stage 1 kit.
CURRENT FUNDS: $1400
CURRENT MODS:
Injen CAI
Sportlines
ZZP midlength header/dp
Shift+
Eibach Rear sway bar (if it ever comes)

PLAN:
Ok so first, I need to pay my insurance, so I'm putting $1000 away for that until I pay it, hopefully it doesnt cost that much XD.
I want to upgrade to FE5 suspension, so another $370 is gone.
$30. ****.
$500 for season lift ticket.
-$470. I'm off to a good start.
Atleast i have a job.

So, I guess I'm gonna save up about $3k, for the kit AND installing. Theres no way I can install it myself, so I'm saying 2000 for the kit, 1000 for installation. If I get stuff cheaper, GREAT.

Does anyone have suggestions for a noob going turbo'd?

06cobaltindallas

well first off i would sell the intake and header if your going turbo because you wont need them. second what power goal do you have in mind for yourself?

NJjon

Well, it's going to be a while before I get all the money and whatnot, so I may as well keep them for now. As of right now, I don't have much of a goal, over 200whp is good enough for now, and there is always room for improvement.

Now if I get the zzp kit, would it be beneficial for me to get a 2.4 intake manifold? Better yet, would it be necessary? I am only 16, I don't even have a drivers liscense yet. I don't want to immediately hop into a death trap... but I still want to build up power.

Am I in over my head with this turbo ****? It seems like a TON more work than going supercharged.

blackbolt89

btw insurance in jersey for a 17 year old is around 2 grand a year. lol. im 19 and i pay 2k.

so youre at -1470

lol

06cobaltindallas

well what i would do is invest in the hahn intake manifold instead of the 2.4 manifold. its not a piece of plastic like the 2.4 and can handle more psi. i dont know much of the zzp kit but i would recommend the hahn over anything. or do like me and build your own set up. since you want just over 200hp and some room for a little improvement i would say get a gt28r turbo.

NJjon

I'm going to be under my parents name, we got it quoted at like 700 ish a year (good student discount ohhh yeaaaa), soooo maybe you should get a new quote haha

06cobaltindallas

but keep in mind that the more power you push, eventually you will have to upgrade your internals. like the rods

elecblue06

iTrader: (1)

ummm ... i'm confused .. you said you don't have the money for the 1200 turbo kit.. but then you say you have 1400 lol good luck saving man... if you need any help with the build / any reasearch let me know.. and obviously let me know about tuning lol

HunterKiller89

iTrader: (1)

reread the OP? lol

BlackCobalt707

iTrader: (5)

maybe you can find a kit in the classified for dirt cheap. and even tho the 2.4 is plastic it will hold up. if hes aiming for a little over 200whp he will be fine. if you can find a way to get some SS/SC rods to work in your car i got some im tryin to sell for about $200, brand new

blackbolt89

haha you sum'bitch



https://www.cobaltss.net/forums/parts-66/2-2l-turbo-kit-182285/

i found one for cheap.

NJjon

I need to save 1000 for insurance, so I'm considering myself at 400 right now.
^^^^^


I posted this last night. Then I had a dream overnight that I went superharged and I liked it. Now I'm at a loss.

elecblue06

iTrader: (1)

oops lol.. and dude you can install it yourself.. just take the oil pan off to a shop to get it tapped if you're worried about that part .. hell theres a shop up by me if you're willing to make a hike thats done some turbo swapped balts and they're great on labor rates and i'd be close by for the tune.. that shop has worked with one specific balt on here everyone knows

good idea paying bills though man..

like i said if you need help let me know.. the classified section here has been poping up with turbo parts all over so i'd say look here first

and

blackbalt707 you need custom pistons or bearing to make the LSJ rods work.. someone did it before i think

hows your build coming?

NJjon

Alright cool, but I havent seen many turbod 2.2s around here, I mean theres plenty of worklogs/how tos for suprercharges, but not much for turbo...

elecblue06

iTrader: (1)

truee thats weird. lol there have been a bunch of turbo 2.2s though

BlackCobalt707

iTrader: (5)

shitty. car wont idle. i just found out the head that is on my car has a EGR casting passage when the original head didnt...so i dont know if thats the problem. i was told i need a CKP relearn and it will idle. i dont know. my friend is gettin a laptop today and checkin the CEL codes tommorow. im tired of dumpin money in this car. ive dumped like $4000 in like 3 months into this car

06_ion2

my car idles just fine after the build i dont get how yours doesnt.

BlackCobalt707

iTrader: (5)

i dont either man. its real depressing, its pissin me off. i wish i could have been there to mess with it but i had a friend of mine build it for me cause im over in the desert right now....i guess i should have waited. its baffling how all of a sudden it wont idle. is there any sensors that might control the idle that my friend might have missed? im hopin the CEL will tell him the problem

im wondering if it needs to be tuned.....everything is the same, i got same compression pistons, i didnt add any cams or anything.. just stiffer and upgraded valve springs and valves...well i know it needs to be tuned, but if a tune would make it idle

HunterKiller89

iTrader: (1)

JE makes the pistons that work with LSJ rods

BlackCobalt707

iTrader: (5)

i dont know dude. i had JE pistons and the wrist pins were too loose around the rods

06_ion2

nope mine idles just fine and i just added a patirot head blower cams valves and springs 8.9:1 pistons. it should idle like a kitten. i used wiesco pistons with eagle rods.

BlackCobalt707

iTrader: (5)

i dunno. ill prolly have to figure it out when i get back to the country

elecblue06

iTrader: (1)

let me know when you get back good sir we'll take care of it

BlackCobalt707

iTrader: (5)

you plan on driving to delaware to help me fix it? lol

elecblue06

iTrader: (1)

wtf i thought you said you lived in NJ lol ..