2.4L LE5 Performance Tech 16 valve 171 hp EcoTec with 163 lb-ft of torque

waiting for your car sucks

Thread Tools
 
Search this Thread
 
Old 02-21-2012 | 11:05 AM
  #1  
G5GT2007's Avatar
Thread Starter
Senior Member
 
Joined: 04-05-06
Posts: 3,519
Likes: 0
From: CT
waiting for your car sucks

Few nights ago my dad was picking up my car for me at the dealer. just getting the tires rotated and safety inspection. on the way home the car stalled. started right back up and it started bucking and not running on all cyl. so he pulled over turned it back off then turned it back on it was fine. then my cel came on and a power engine reduce message came up and the car wouldn't go over 25mph. got the car home i called gm road side and over the phone i told them the car was lowered and to tell the towing company. towing company today calls and i tell him over the phone the car is 2inch lowered it wont fit on a flat bad it needs a tow truck and then im not sure if the rear will scrape. so he wanted me to sign a paper stating if there is damage its on me. so i told him to forget it ill drive it myself. so i brought it to the shop this morning with my mom fallowing me in her car. they told me there is 3 codes im waiting for them to call me back to tell me whats going on. I want to call them back but don't want to be a pain in the ass but i want to know whats going on with my car lol.
Old 02-21-2012 | 11:50 AM
  #2  
stormtrooperxl's Avatar
Member
iTrader: (5)
 
Joined: 08-18-11
Posts: 233
Likes: 2
From: Augusta Georgia
Hey its your car and your money so be a pain in the ass, lol
Old 02-21-2012 | 11:58 AM
  #3  
G5GT2007's Avatar
Thread Starter
Senior Member
 
Joined: 04-05-06
Posts: 3,519
Likes: 0
From: CT
haha I know but i want them to do a good job. I called at 10 and they said she was out road testing it and that it had 3 codes stored in the computer and they would call me. now its 12 and no call.
Old 02-21-2012 | 11:59 AM
  #4  
ChevelleGrl's Avatar
Senior Member
 
Joined: 01-31-10
Posts: 869
Likes: 0
From: Buffalo, NY
It's only noon.. id say if you dont hear from them by 1, call them. Have to give them a chance to get to it..
Old 02-21-2012 | 12:06 PM
  #5  
G5GT2007's Avatar
Thread Starter
Senior Member
 
Joined: 04-05-06
Posts: 3,519
Likes: 0
From: CT
yeah that is what im going to do. its not at a dealer is at a shop that can do gm warranty work.
Old 02-21-2012 | 12:07 PM
  #6  
CannonBalt's Avatar
Senior Member
 
Joined: 11-05-11
Posts: 1,700
Likes: 5
From: Stratford, Ontario
My SS's starter just died, and my battery in the same day. In the shop, Also getting new tires and front wheel bearings. Welcome to the world of "Waiting" on your car. lol
Old 02-21-2012 | 12:09 PM
  #7  
BLAZIN07SS's Avatar
I'm too JDM for you
iTrader: (7)
 
Joined: 06-05-07
Posts: 16,370
Likes: 1
From: Miami, Florida
only lowered 2 inches? it can get on a flatbed fine with a couple boards.



don't tell me you can't get on a flatbed
Old 02-21-2012 | 12:15 PM
  #8  
G5GT2007's Avatar
Thread Starter
Senior Member
 
Joined: 04-05-06
Posts: 3,519
Likes: 0
From: CT
lol yeah it sucks waiting when she calls im going to have her change the fuel filter and the belt its never been done and im at 74k


I new they could tow it the tow truck guy was just being stupid and lazy. they did crush the front lip one time when it was stock height trying to get it on a flat bed but they loaded it wrong. all he need where ramps to higher it up to get on the truck.
Old 02-21-2012 | 12:17 PM
  #9  
drumrush's Avatar
Premium Member
iTrader: (8)
 
Joined: 02-23-11
Posts: 3,454
Likes: 0
From: Ohio
Mikes car is ftw
Old 02-21-2012 | 01:07 PM
  #10  
G5GT2007's Avatar
Thread Starter
Senior Member
 
Joined: 04-05-06
Posts: 3,519
Likes: 0
From: CT
she said it was something with my tb and a few other issues they are ordering parts for it so i hope there in today.
Old 02-21-2012 | 04:15 PM
  #11  
07MetallicSC's Avatar
Super Moderator
Platinum Member
iTrader: (16)
 
Joined: 09-29-06
Posts: 23,422
Likes: 214
From: Land of Freedom
you couldnt rotate the tires yourself? safety inspection?! lol and now it runs funny and your spending money on parts? hmm seems scammy to me. take the tb off and clean it yourself. as far as the rest, need codes to know exactly.

post up the codes here.

and sheet mine made it up on a flatbead on h&rs.
Old 02-21-2012 | 04:18 PM
  #12  
LS6Rally's Avatar
Senior Member
iTrader: (14)
 
Joined: 11-09-07
Posts: 7,257
Likes: 1
From: Taunton MA
yah i've been on a flatbed when some slashed my tires, went up fine.

pffftt. 74K on a belt! i've got 150K and i've never replaced it ( stupid me) i have it in the garage, just haven't done it.
Old 02-21-2012 | 05:12 PM
  #13  
G5GT2007's Avatar
Thread Starter
Senior Member
 
Joined: 04-05-06
Posts: 3,519
Likes: 0
From: CT
I have to bring my car into the dealer ever 7k for them to rotate the tires when i get to 26k i can get a set of new tires at no charge to me so yeah the car does go back to the dealer. Im not paying for any of the repairs i bought the extended warranty when i bought the car im covered till 100k no deductible and i got a free rental car. It wasn't that tb was dirty she said i asked she said it was clean. when i pick the car up tomorrow ill see what they wrote on the paper


I travel to much with this car to take any chanced with worn out parts. So i would rather have them change the belt since its there then have it snap on me when im driving 1000s of miles from my house. there also doing the fuel filter since i never did that
Old 02-21-2012 | 05:39 PM
  #14  
LS6Rally's Avatar
Senior Member
iTrader: (14)
 
Joined: 11-09-07
Posts: 7,257
Likes: 1
From: Taunton MA
^ i was being a smart ass. you are right to change it. i need to change mine
Old 02-21-2012 | 05:44 PM
  #15  
rever3nce's Avatar
Senior Member
iTrader: (3)
 
Joined: 01-07-11
Posts: 1,368
Likes: 0
From: South Texas
Just got a 2010 Cobalt SS/TC Unfortunately its gonna take 2 weeks for them to get the title and another 2 weeks to ship it from Illinois.

Now that SUCKS . I know the feeling buddy
Old 02-21-2012 | 07:15 PM
  #16  
G5GT2007's Avatar
Thread Starter
Senior Member
 
Joined: 04-05-06
Posts: 3,519
Likes: 0
From: CT
Originally Posted by LS6Rally
^ i was being a smart ass. you are right to change it. i need to change mine
haha thats what i figured. i was going to change it myself then i looked and was like nope forget it lol its a tight fit.

Just got a 2010 Cobalt SS/TC Unfortunately its gonna take 2 weeks for them to get the title and another 2 weeks to ship it from Illinois.

Now that SUCKS . I know the feeling buddy
haha yes that does suck! they are keeping the car over night i hope to get it back tomorrow.
Old 02-21-2012 | 07:55 PM
  #17  
redcobalt07's Avatar
Senior Member
iTrader: (18)
 
Joined: 12-06-09
Posts: 5,965
Likes: 0
From: Harrisburg, PA
Originally Posted by BLAZIN07SS
only lowered 2 inches? it can get on a flatbed fine with a couple boards.



don't tell me you can't get on a flatbed
FF_drift_lol lives!!!
Old 02-21-2012 | 08:16 PM
  #18  
07MetallicSC's Avatar
Super Moderator
Platinum Member
iTrader: (16)
 
Joined: 09-29-06
Posts: 23,422
Likes: 214
From: Land of Freedom
^ LOL not that picture
Old 02-22-2012 | 05:52 AM
  #19  
-TurboSS-'s Avatar
Member
 
Joined: 03-13-11
Posts: 328
Likes: 0
From: Lethbridge, Canada
pedobear.. hehe. I had a ***** decal on my explorer around 2004 or so. I had it parked in my parents driveway and some 8yo or so asked my mom if she was a pornstar. lol. That was funny as **** when she told me.
Old 02-23-2012 | 06:48 PM
  #20  
G5GT2007's Avatar
Thread Starter
Senior Member
 
Joined: 04-05-06
Posts: 3,519
Likes: 0
From: CT
my car is back picked it up today codes it got was p0106 p0068 p0014 p0101


replaced exhaust cam actuator valve and throttle body module
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jesse
How to Guide
57
10-15-2015 11:56 AM
hawkssoccer11
Pictures & Videos
109
09-30-2015 12:14 PM
yellowsupercharged06
Parts
15
09-17-2015 04:40 PM
lorenjr
Parts
1
09-06-2015 09:00 AM



Quick Reply: waiting for your car sucks



All times are GMT -4. The time now is 12:45 AM.