ZZP Long tube header package
#26
GF, upon watching vid says: Wow, sounds so much better on video! FWIF...
YouTube - 2.4L Cobalt SC w/ZZP Header and 3" ZZP exhaust
YouTube - 2.4L Cobalt SC w/ZZP Header and 3" ZZP exhaust
#27
Have it, full ZZP header w/cat and 3" resonated exhaust.
Sounds like ****, sorry to say.
But, I'm older (36) and wasn't looking for a fart can sound...liked the stock exhaust with M62 so much better.
NOW, could be tuning issues...HPTuners came with my ZZP order so I'm starting to log and learn and have yet another ZZP order on the way (LS4 TB, 60# injectors, Stage2 pulley (3.1") and AEM WB) so I'm hoping in time to improve performance and sound quality as well.
Sounds like ****, sorry to say.
But, I'm older (36) and wasn't looking for a fart can sound...liked the stock exhaust with M62 so much better.
NOW, could be tuning issues...HPTuners came with my ZZP order so I'm starting to log and learn and have yet another ZZP order on the way (LS4 TB, 60# injectors, Stage2 pulley (3.1") and AEM WB) so I'm hoping in time to improve performance and sound quality as well.
#28
If it quiets things down Zooomer I'd likely buy it. Idle is fine, WOT sounds ok (alright, better than ok going by the vid I just posted )....just that middle ground of daily driving that is too loud for what little is happening between speed and RPM.
#30
Without a resonator
http://www.youtube.com/watch?v=PctP7NPSu1E
with a resonator
YouTube - Eclipse RPW Header + Hushpower II resonator + Invidia Catback
ah the power of a resonator
Last edited by CordiaDOHC; 04-05-2011 at 12:33 PM.
#32
#33
GF, upon watching vid says: Wow, sounds so much better on video! FWIF...
YouTube - 2.4L Cobalt SC w/ZZP Header and 3" ZZP exhaust
YouTube - 2.4L Cobalt SC w/ZZP Header and 3" ZZP exhaust
would any muffler fit this exhaust? cause its 3"
#35
ya it is... but ottawa and I are both boosting. so that is why we went 3". Its just this thing is to ricey! if it sounded like ottawa I wouldnt be complaining but maybe its sounds like that cause his windows are up...
#38
Yes. 2.5!!! if u are a 2.4 then ur stock exhaust is good man just change the muffler. Honestly I regret this stupid ricey sound! its not the 3 exhaust but the muffler. So just go with a different muffler.
Hey ottawa when u gonna get that new muffler? Cause Idk if I can get a universal muffler or if it has to be a certain size... let me know man im embarrased to even drive the car haha.
Hey ottawa when u gonna get that new muffler? Cause Idk if I can get a universal muffler or if it has to be a certain size... let me know man im embarrased to even drive the car haha.
#39
Alright I figured this out... yesterday I got my car back and tuned and ready to go! So I actually got to gun it. alright so this is whats up.... the zzp sounds great a low rpms and when u go WOT but from 3-4K rpms that ricey sound makes its way out... but its really noticeable when u are trying to speed up when u get into that rpm range... its sounds bad but at wot ur good and low rpms... What I do to avoid that high pitch ricey noise is to gradually go up in speed.... later I will get some vids of the car and its very loud... I dont mind that one bit. so overall it isnt as bad also it sounds worse in the car then outside. ottawa have someone else drive it and have them go WOT u might change ur mind... like I said it sound like a fart can btw those rpms then u cant notice... well I cant
#40
Alright I figured this out... yesterday I got my car back and tuned and ready to go! So I actually got to gun it. alright so this is whats up.... the zzp sounds great a low rpms and when u go WOT but from 3-4K rpms that ricey sound makes its way out... but its really noticeable when u are trying to speed up when u get into that rpm range... its sounds bad but at wot ur good and low rpms... What I do to avoid that high pitch ricey noise is to gradually go up in speed.... later I will get some vids of the car and its very loud... I dont mind that one bit. so overall it isnt as bad also it sounds worse in the car then outside. ottawa have someone else drive it and have them go WOT u might change ur mind... like I said it sound like a fart can btw those rpms then u cant notice... well I cant
#41
honestly I can live with it. I rarely hit that rpm in dd but when I do i just left off and ease it down. but wot is alrigh ur video of the eclipse it does have a deeper tone to it but im ok with it I was drivin my friends celica while he drove mine and it was alright with me. I will get u vids cordia... urs will sound deeper as u arent going 3". Some part of me wishes i did but overall im ok.
#43
#45
honestly I can live with it. I rarely hit that rpm in dd but when I do i just left off and ease it down. but wot is alrigh ur video of the eclipse it does have a deeper tone to it but im ok with it I was drivin my friends celica while he drove mine and it was alright with me. I will get u vids cordia... urs will sound deeper as u arent going 3". Some part of me wishes i did but overall im ok.
#47
HA! I don't like to knock ZZP given the $$$ I've spent with them so far on my balt but I am glad I'm not the only one who thinks it could sound much, much better. Manny, I'm going to try dynomax super turbo muffler very soon...keep you posted if you don't beat me to it.
same muffler(design wise) but with SS packing
Stainless Works - Performance Exhausts and Headers
#48
Yes. 2.5!!! if u are a 2.4 then ur stock exhaust is good man just change the muffler. Honestly I regret this stupid ricey sound! its not the 3 exhaust but the muffler. So just go with a different muffler.
Hey ottawa when u gonna get that new muffler? Cause Idk if I can get a universal muffler or if it has to be a certain size... let me know man im embarrased to even drive the car haha.
Hey ottawa when u gonna get that new muffler? Cause Idk if I can get a universal muffler or if it has to be a certain size... let me know man im embarrased to even drive the car haha.
#49
#50
So unless some one can post a link for a 2.5" header/DP combo than I have to firsr make a decision between
2.5"
http://www.zzperformance.com/cobalt_...1198&catid=155
or 3"
http://www.zzperformance.com/cobalt_...1199&catid=155
after that what header should i use???
I AM NOT GOING TURBO OR SUPERCHARGED
2.5"
http://www.zzperformance.com/cobalt_...1198&catid=155
or 3"
http://www.zzperformance.com/cobalt_...1199&catid=155
after that what header should i use???
I AM NOT GOING TURBO OR SUPERCHARGED