- MRZ Performance - Lightweight and Underdrive Pulley group buy for Ecotec's
#1
Banned
Thread Starter
Join Date: 03-13-06
Location: Canada Qc + USA Me
Posts: 1,018
Likes: 0
Received 0 Likes
on
0 Posts
- MRZ Performance - Lightweight and Underdrive Pulley group buy for Ecotec's
MRZ Performance is proud to bring you a group buy for the
Billet Aluminum Lightweight and Underdrive Pulleys for the Ecotec engines that we carry for the 2.2(L61) - 2.4(LE5) - 2.0 SC(LSJ)
Billet Aluminum Lightweight and Underdrive Pulleys for the Ecotec engines that we carry for the 2.2(L61) - 2.4(LE5) - 2.0 SC(LSJ)
Those pulley will free up some extra horsepower and they will also give you a better throttle response due the rotating mass reduction. Up to 3x lighter than the OEM pulley!
Here are the complete description for each of the pulleys we sell in this group buy:
2.2 and 2.4 LIGHTWEIGHT - http://mrzperformance.vstore.ca/prod...roducts_id/144
2.2 and 2.4 UNDERDRIVE - http://mrzperformance.vstore.ca/prod...roducts_id/143
2.0 SC LIGHTWEIGHT - http://mrzperformance.vstore.ca/prod...roducts_id/139
Finish available
- ANODIZED RED
- ANODIZED BLUE
- ANODIZED BLACK
- ANODIZED NATURAL
We have them in stock but in limited qty, first to pay will be first shipped out.
Here are a bunch of pictures from the various pulleys
UDP vs STOCKER
----------------------------
DESCRIPTION
2.2 and 2.4 LIGHTWEIGHT - http://mrzperformance.vstore.ca/prod...roducts_id/144
2.2 and 2.4 UNDERDRIVE - http://mrzperformance.vstore.ca/prod...roducts_id/143
2.0 SC LIGHTWEIGHT - http://mrzperformance.vstore.ca/prod...roducts_id/139
-------------------------
PRICE
REGULAR PRICE - $174.95
Group Buy Prices:
$15 off PRICE LIST with 10 + MEMBERS - $159.95
$20 off PRICE LIST with 20 + MEMBERS - $154.95
Belts available for $40 extra with the UDP version
-----
shipping charges $15 USA or CANADA or $? INTERNATIONAL(Contact us)
Shipping via Air Mail - Canada Post - USPS - 3 to 15 business days delivery
5% GST will apply to Canadian orders, 5% GST + 7.5% QST on orders in Quebec.
We are located in Canada so CAD payment is prefered but USD payment also accpeted. Same price with both USD and CAD.
------------------------
ORDERING
If you are sure and only if you are sure you will buy this product, you can enter your name down the following list with your preferences.
This group buy will go on untill Saturday November 22nd 2008
Payment must be send before November 27nd 2008 or you wont be able to benefit the group buy discounts. We will ship when the final discount is reached.
We'll send you some sticker with your order in the color you want. If you dont notify the color you will received red stickers.
Our Paypal is sales@mrzperformance.com but we also accept money order or cashier checks made to MRZ Performance. Mailing adress is:
MRZ Performance
600, 6e Avenue Sartigan
Saint-Georges, Quebec G5Y5B8
Canada
With your Payment you must included the following:
- Your Name on CobaltSS.net
- Real Name + Adress to ship to
- Finish you want
- Engine and pulley type (Lightweight or UDP)
- Free Sticker Color if you want them
--------------------------------------------
Your satisfaction is guaranteed on these pulleys like all our products.
Thank you for your interest in MRZ Performance products! If you have any questions, feel free to contact us anytime via PM or at sales@mrzperformance.com
11 MEMBERS HAVE JOINED THIS GROUP BUY
BILLET PULLEYS ORDERING LIST
BILLET PULLEYS ORDERING LIST
#- Member Name - Finish - engine - UDP or Lightweight - TOTAL w Shipping(Status)
1 - SS/SC Crazer - RED - lightweight 2.0L - Red stickers - PAID
2 - CobaltLT - Red - Lightweight 2.2l - Red stickers - PAID
3 - clipse - BLUE - underdrive 2.2l - black stickers - $174.95
4 - Knoxbox - RED - Underdrive 2.2l + belt - Black Stickers - PAID
5 - 07sunburst - Black - lightweight 2.0L - White Stickers - $174.95
6 - Blackmachine - BLUE - Lightweight 2.2l - White Stickers - $174.95
7 - drew1991sf - OUT
8 - chevysssc - Red - Lightweight 2.0l - black stickers - $174.95
9 - chris88z24 - Red - Lightweight 2.0l - Red Stickers - $174.95
10 - Sassy07ss - Black - Lightweight 2.4l - Black Stickers - $174.95
11 - davekicksyourass - Natural - 2.4 l - No Stickers - PAID
12 - cobalt_addict - Red 2.0l - Red Stickers - PAID
13 -
14 -
15 -
16 -
17 -
18 -
19 -
20 -
21 -
22 -
23 -
24 -
25 -
27 -
28 -
29 -
30 -
31 -
32 -
33 -
34 -
35 -
---- You can now send your Payment ----
TOTAL $174.95 (Pulley $159.95+Shipping $15)
Paypal - SALES@MRZPERFORMANCE.COM
Money Order - MRZ Performance, 600 6e ave Sartigan, St-Georges, Qc, G5Y 5B8
With your Payment you must included the following:
- Your Name on CobaltSS.net
- Real Name + Adress to ship to
- Finish you want
- Engine and pulley type (Lightweight or UDP)
- Free Sticker Color if you want them
- Canadian Customer must include 5% GST on TOTAL amount
--------------------------------
TOTAL $174.95 (Pulley $159.95+Shipping $15)
Paypal - SALES@MRZPERFORMANCE.COM
Money Order - MRZ Performance, 600 6e ave Sartigan, St-Georges, Qc, G5Y 5B8
With your Payment you must included the following:
- Your Name on CobaltSS.net
- Real Name + Adress to ship to
- Finish you want
- Engine and pulley type (Lightweight or UDP)
- Free Sticker Color if you want them
- Canadian Customer must include 5% GST on TOTAL amount
--------------------------------
Thanks to all of you for your support!
PM or Post or Email any questions
Last edited by MRZ - RedGTZ; 12-01-2008 at 11:54 PM.
#6
Junior Member
Join Date: 06-27-07
Location: Follow the dust trail!
Posts: 475
Likes: 0
Received 0 Likes
on
0 Posts
Add me, SS/SC Crazer - Adam Weber, 48720 Romeo Plank Macomb, MI 48044., red finish, light weight, 2.0L engine, red stickers. Thanks, need any other info, let me know!!
#8
Banned
Thread Starter
Join Date: 03-13-06
Location: Canada Qc + USA Me
Posts: 1,018
Likes: 0
Received 0 Likes
on
0 Posts
The dyno test was done with a close to stock 2.2 engine and put out approx. 3-4hp gain, the results are posted on the forum over here as we sent the pulleys to a member to be dynoed. The best gain from these pulleys is the fact that the engine revs faster with the lower rotational mass and this is what people feel the most when they install the lightweight or underdrive pulley
There are a lot of threds about our pulleys here on the forum also if you want to read about it
Thanks for joining Adam!
Last edited by MRZ - RedGTZ; 10-31-2008 at 08:10 AM. Reason: Automerged Doublepost
#9
Senior Member
Join Date: 03-04-08
Location: Nor Cal
Posts: 2,018
Likes: 0
Received 0 Likes
on
0 Posts
#13
Can I send mine back, get a refund, and buy one under the group buy?...JK!
I have the 2.4L MRZ lightweight UDP. Fairly easy install, looks good when you have the splash cover off, and my MPG has gone up -- and I believe it's partly due to the slower rotation speed of the alternator and AC compressor (10% slower than stock at the same road speed).
My alternator is still putting out the same voltage and amperage -- I had my charging system tested by the local autozone before and after install. Same output at idle and at 2000 RPM. This is similar to what GM did back in the 60s -- when you bought a car with 3.42 or higher numerical gears they installed a larger AC Compressor pulley and alternator pulley to slow them down at highway speed.
I have the 2.4L MRZ lightweight UDP. Fairly easy install, looks good when you have the splash cover off, and my MPG has gone up -- and I believe it's partly due to the slower rotation speed of the alternator and AC compressor (10% slower than stock at the same road speed).
My alternator is still putting out the same voltage and amperage -- I had my charging system tested by the local autozone before and after install. Same output at idle and at 2000 RPM. This is similar to what GM did back in the 60s -- when you bought a car with 3.42 or higher numerical gears they installed a larger AC Compressor pulley and alternator pulley to slow them down at highway speed.
#14
Banned
Thread Starter
Join Date: 03-13-06
Location: Canada Qc + USA Me
Posts: 1,018
Likes: 0
Received 0 Likes
on
0 Posts
Can I send mine back, get a refund, and buy one under the group buy?...JK!
I have the 2.4L MRZ lightweight UDP. Fairly easy install, looks good when you have the splash cover off, and my MPG has gone up -- and I believe it's partly due to the slower rotation speed of the alternator and AC compressor (10% slower than stock at the same road speed).
My alternator is still putting out the same voltage and amperage -- I had my charging system tested by the local autozone before and after install. Same output at idle and at 2000 RPM. This is similar to what GM did back in the 60s -- when you bought a car with 3.42 or higher numerical gears they installed a larger AC Compressor pulley and alternator pulley to slow them down at highway speed.
I have the 2.4L MRZ lightweight UDP. Fairly easy install, looks good when you have the splash cover off, and my MPG has gone up -- and I believe it's partly due to the slower rotation speed of the alternator and AC compressor (10% slower than stock at the same road speed).
My alternator is still putting out the same voltage and amperage -- I had my charging system tested by the local autozone before and after install. Same output at idle and at 2000 RPM. This is similar to what GM did back in the 60s -- when you bought a car with 3.42 or higher numerical gears they installed a larger AC Compressor pulley and alternator pulley to slow them down at highway speed.
Last edited by MRZ - RedGTZ; 11-03-2008 at 10:39 AM. Reason: Automerged Doublepost
#18
I remember reading in another thread that the lsj pulley is slightly overdriven? ...which is good for us with smaller SC pulleys, but it doesn't mention this in the product description,
so is that the case or is it another pulley you offer?
so is that the case or is it another pulley you offer?
#19
Banned
Thread Starter
Join Date: 03-13-06
Location: Canada Qc + USA Me
Posts: 1,018
Likes: 0
Received 0 Likes
on
0 Posts
We made the Lightweight LSJ pulley the exact same size as the OEM pulley to maintain the same boost level. We can always do custom size(dia. and ribs) if needed for custom applications... for example, we made a OEM sized 8 ribs pulley for an LSJ lately...
#20
Senior Member
Join Date: 08-23-08
Location: strawberry plains, tn
Posts: 1,097
Likes: 0
Received 0 Likes
on
0 Posts
im interested in doing this group buy, what would the cost be for a 2.2 Light weight and UDP in RED w/ belt, with black stickers, assuming we get 20+ ppl?
i'm going to assume 364.90 correct?
i'll need to contemplate this and the pocket book... lemme know if i am right on the price or not.
thanks in advance.
i'm going to assume 364.90 correct?
i'll need to contemplate this and the pocket book... lemme know if i am right on the price or not.
thanks in advance.
#21
Banned
Thread Starter
Join Date: 03-13-06
Location: Canada Qc + USA Me
Posts: 1,018
Likes: 0
Received 0 Likes
on
0 Posts
im interested in doing this group buy, what would the cost be for a 2.2 Light weight and UDP in RED w/ belt, with black stickers, assuming we get 20+ ppl?
i'm going to assume 364.90 correct?
i'll need to contemplate this and the pocket book... lemme know if i am right on the price or not.
thanks in advance.
i'm going to assume 364.90 correct?
i'll need to contemplate this and the pocket book... lemme know if i am right on the price or not.
thanks in advance.
Thank you for your interest in MRZ Performance products
#23
Senior Member
Join Date: 08-23-08
Location: strawberry plains, tn
Posts: 1,097
Likes: 0
Received 0 Likes
on
0 Posts
so just to confirm what i want...
this is all for the 2.2 ls
Light weight crank pulley anodized red
Underdrive pulley w belt anodized red
black stickers.