Official Retrofit Thread
#2327
Senior Member
iTrader: (6)
Been very busy lately. Moved on from retrofitting on masses. Just do little projects here and there. Also stir up a lot of doodoo on facebook vs other "master" retrofitters. Just plain awesome. Lol.
Here's a good question to the yall. Duplicolor paint. Over plastic . Has anybody had issues with this paint. Black metallic duplicolor. I been having nothing but issues after issues with a redline set I been trying to finish. Btw. Unless u have a redline don't try to shove a fxr in there . It was a horrible time. But it's done lol.
Here's a good question to the yall. Duplicolor paint. Over plastic . Has anybody had issues with this paint. Black metallic duplicolor. I been having nothing but issues after issues with a redline set I been trying to finish. Btw. Unless u have a redline don't try to shove a fxr in there . It was a horrible time. But it's done lol.
#2330
Hey dudes,
I'm having some trouble aligning the cutoff in one of my headlights. I've got the H1 Mini's installed and the left headlight is perfectly aligned without issue but the right one keeps slowly rotating to the left over the course of a few days until it is about 15 degrees off the horizontal. I've tried tightening the screw that holds the projector as well as rotating it back into place but the damn thing keeps rotating back. I'm not **** about **** like this but this is just pissing me off. If it was just a couple of degrees off I wouldn't really care but it's enough to really notice.
Any suggestions as to what I can do to keep the damn thing from rotating again?
I'm having some trouble aligning the cutoff in one of my headlights. I've got the H1 Mini's installed and the left headlight is perfectly aligned without issue but the right one keeps slowly rotating to the left over the course of a few days until it is about 15 degrees off the horizontal. I've tried tightening the screw that holds the projector as well as rotating it back into place but the damn thing keeps rotating back. I'm not **** about **** like this but this is just pissing me off. If it was just a couple of degrees off I wouldn't really care but it's enough to really notice.
Any suggestions as to what I can do to keep the damn thing from rotating again?
#2332
Senior Member
iTrader: (24)
Hey dudes,
I'm having some trouble aligning the cutoff in one of my headlights. I've got the H1 Mini's installed and the left headlight is perfectly aligned without issue but the right one keeps slowly rotating to the left over the course of a few days until it is about 15 degrees off the horizontal. I've tried tightening the screw that holds the projector as well as rotating it back into place but the damn thing keeps rotating back. I'm not **** about **** like this but this is just pissing me off. If it was just a couple of degrees off I wouldn't really care but it's enough to really notice.
Any suggestions as to what I can do to keep the damn thing from rotating again?
I'm having some trouble aligning the cutoff in one of my headlights. I've got the H1 Mini's installed and the left headlight is perfectly aligned without issue but the right one keeps slowly rotating to the left over the course of a few days until it is about 15 degrees off the horizontal. I've tried tightening the screw that holds the projector as well as rotating it back into place but the damn thing keeps rotating back. I'm not **** about **** like this but this is just pissing me off. If it was just a couple of degrees off I wouldn't really care but it's enough to really notice.
Any suggestions as to what I can do to keep the damn thing from rotating again?
#2333
Junior Member
iTrader: (1)
This is going to be really vague but I'm hoping someone can shed some knowledge for me.
I recently got my retros from Mario Martinez off facebook. These are what he sent me that comprise of
Ionic HID Relay Harness - 9007/HB5 Xenon Wiring
Wattage 35w
Bulb type h1
Bulb color 4300k
Digital w/ Fuse Low Beam
They've been awesome and working perfectly for the past few weeks since I installed them. However I went to turn them on today and they projectors wouldn't turn on. The halos and turn signals work perfectly, but the projectors won't fire up. The only thing that I did today was zip tie some wires up so they weren't hanging so much when I put my new bumper on, but nothing came undone. All fuses seem fine. Any ideas?
I recently got my retros from Mario Martinez off facebook. These are what he sent me that comprise of
Ionic HID Relay Harness - 9007/HB5 Xenon Wiring
Wattage 35w
Bulb type h1
Bulb color 4300k
Digital w/ Fuse Low Beam
They've been awesome and working perfectly for the past few weeks since I installed them. However I went to turn them on today and they projectors wouldn't turn on. The halos and turn signals work perfectly, but the projectors won't fire up. The only thing that I did today was zip tie some wires up so they weren't hanging so much when I put my new bumper on, but nothing came undone. All fuses seem fine. Any ideas?
#2335
Official Retrofit Thread
Been busy lately! Been making some killah sets lately IMO. Haha.
Heres a black set with gatling guns and 3/4 halos (most everyone wants these haha) and demon eyes
Heres a set where i opened up the holes to match the halos. Painted these a nice metallic black
And these ones are my favorite ever lol. Took panamera shrouds and modded the f out of them to realy make the look happen. These are on fxrs and full switchbacks. Put 10ish hours into those shrouds doe! Gloss black housings too when most i do in flat
Hrmghrrrrr!!!
Heres a black set with gatling guns and 3/4 halos (most everyone wants these haha) and demon eyes
Heres a set where i opened up the holes to match the halos. Painted these a nice metallic black
And these ones are my favorite ever lol. Took panamera shrouds and modded the f out of them to realy make the look happen. These are on fxrs and full switchbacks. Put 10ish hours into those shrouds doe! Gloss black housings too when most i do in flat
Hrmghrrrrr!!!
#2343
Senior Member