**** i got rid of my small ss badge

so you didn't wrap it you just glued the cf to it? i still have 2 chunks of cf already resined and everything from my pods

 

what materials did you use to cover the ceiling of the car? did you remove the one thats there or just place it over it? And is that the same material you used for the doors? thanks

 

I actually dyed the headliner (and no, not with that cheap ass **** they sell at pep boys and autozone). I went to a fabric store and bought actual fabric dye, and sprayed it through a paint gun at school. It's held up for almost 2 years now. The fabric in the center of the doors is the black leather that came with my Katzkin seat covers

 

I'm blinded by all that damn blue spray paint everywhere...

 

nrg quick release, nrg suede seats, nrg harness bar, nrg 4pt harness's, hurst sts, 3 gauge pillar, glowshift gauges, painted orange trim, back seat delete, 2 diamond 10" subs. Planning on doing all suede interior.

 

sweet... that looks badass did you paint the dome light as well?

 

how did you spray it? was it hard to remove out? thanks

 

i made this 2 when i first got my car but it was real carbon fiber urs looks like the tape u can buy at auto zone

pics later

i got mine like this as far as wut is in blue like the dash trim, doors, and the center consolethe rest is in black

 

where do you guys get the carbon fiber panels for your interior, do you have to go out and get them done proffesionally or order them?

 

How did you get the red LED lights behind the controls like that? is there a kit?
I've got the newer model steering wheel but that would be awesome to do if i can..

 

I am sure you could find a place that will do the CF interior for you... You can order CF from ebay and wrap anything you want with it really to some extent and your skill limiting. There are different types of carbon fiber though from what I have read 2x2 twill is the best for wrapping parts. Search on ebay, usually on their item auction page they will have tons of info and how to's on there atleast the one I looked at did.

 

^^^ twill isnt best for wrapping parts but its whats normally used because of the look it has.

 

Bother plain weave and twill is fine for wrapping parts. 3k or 6k is fine for intricate pieces Anthony above that is for less curvy pieces. The higher the number the thicker it is

 

Plur13 thats a lot of blue but damn that looks good.

 

here are some pictures of my interior

 

^^^I love your interior. But if it was me, I would invest in a indash screen. It will look perfect then.

 

yeah, i just cant find one for 700 like i did this one i have now. and yes, it is an avic N3 that i have there.

 

Stock interior...



Im not sure what you call it, but the gray part in this picture (the little piece over where the window buttons are.

I want to paint those. How do they come off?

 

I will post pictures when im done with my interior...

So far:
Momo Commando steering wheel
Red and Black racing seats
4 Dash peices painted red
Manual windows turned into power windows
black w/Red leather door panels from the ss
SS/sc gauge cluster
Rear interior in black (came from a ss/sc)
rear black and red leather seats from the ss/sc
3 gauge pillar with tinted glowshift gauges
black and red shift knob.


The rear interior is still beige, but I'm dynamatting the rear interior, once done the complete black interior will be swapped in.


And for those who painted the beige dash to black... (its a bad idea, and it will scrap off regardless of how many coats you apply) I learned the hard way, but I got the original ebony dash now.

** also forgot to add the slim ps2.., and its hooked up to the pioneer indash I have.

 

Custom wrapped Carbon Fiber Fabric headliner...kinda of a pain to do!

 

that looks sick ^

 

that is one badass interior

 

x2134903294

 

Wow thanks for the comments i usually get people bashing me about my wing. Right now i am looking for someone who can wrap my plastic pieces to my dash in carbon fiber!

 

holy **** way too much CF