Those lights are awesome...its worth the 5 bucks

P.S i still owe u 5 bucks lol

 

Courtney...can i buy a light off you tonight?

Anyone else going for a cruise tonight, prolly the last cruise night of the year...i might go out for a bit if it stays nice out.....dubs at 8

 

Anyone want to help me install those 2 lights that I have?? I was told it was a simple process since.. well, there isn't really anything needed to it, but I have also read no need to get a fuse for it since your just splicing them into the cigarette lighter??

I'll bring them along in case someone decides to help, should I bring something more specific so we can get the switch hooked up, like a drill

 

Bring them over to my house now....if you want. Im an electrican lol.

 

I work till 6:30pm, but after words I can if you want

 

Phone me when you get off...8803003

 

Okay for sure, if you want, you can PM your address or just post it in, that way I can map it so I know where I am going

 

anyone going out tonight?

 

OK folks. Here is our LED lights group purchase lol. For starters, here are our light sizes, officially (minor changes for different years):
So now you know the sizes, here is where I will be ordering from:
http://hid-lights.com/ (click on "Miniature LED Light")
Here is some info I learned the hard way to help you make your choices:

• For rear sidemarkers, the light cannot be too "tall" or it won't fit. That's why I was stuck with some extra 194s that I sold as trunk lights. The http://www.hid-lights.com/products/led/194-9w.html light I used for the trunk light will also fit in the front side marker area too. But for the rear sidemarkers, I would suggest the http://www.hid-lights.com/products/led/GP-194-5w.html light, which I plan to order next.
• For the license plate light, there is a metal clamp that literally digs into the light, and you are on your own to experiment with what will work in there. I use the http://www.hid-lights.com/products/led/194-1w.html light and it fits in there fine.
• If you decide to do the turn signals, you will need to wire in resistors for each light as well (http://www.hid-lights.com/resistor-6ohm.htm) or else the blinker will blink crazy fast, thinking you have a burned-out light (cause LEDs use so little power). These resistors heat up and will melt any plastic. Mine melted a hole through my airbox, after the MAF, causing some weird behaviour on the track, as well as melting through a few wires. So if you decide to go this route, you will need to pick yourself up some extra wire and soldering tools, and some self-tapping metal screws. I can help anyone who wants to do this, so you can learn from my mistakes.
• Again, for turn signals: The replacement set I bought (I broke one on install) for my front signals do not fit as they are too wide to fit through the hole. I originally bought the http://www.globalpremier.com/3157-18w.htm light which fits great in the rear and will clear the hole in the front. But the replacement http://www.globalpremier.com/3157-20W.htm light I bought is too wide.
• Yet again, for turn signals: For some reason, only the front turn signal holders have two little tabs, or raised plastic edges that need to be filed down in order for LED replacements to fit. I can show you which part I am talking about if you want to do the front signals.

Cliff notes:
The recommended, plug-and-play and brightest LEDs are:
For Front Side Markers (2) and trunk (1):
http://www.hid-lights.com/products/led/194-9w.html
For Rear Side Markers (2):
http://www.hid-lights.com/products/led/GP-194-5w.html
For License plate (1):
http://www.hid-lights.com/products/led/194-1w.html
For High-mount Brake Light (3):
http://www.hid-lights.com/products/led/GP-921-9w.html
For Reverse Lights (same as brake) (2):
http://www.hid-lights.com/products/led/GP-921-9w.html
(These are just my recommendations, based on price and what worked for me.)
All of these together cost "about" $60.44 USD shipped for the set.
All bulbs are sold in pairs from the site, so if we all order the same type, we are bound to get extras, thereby lowering the cost. They also offer bulk discounts, further lowering the cost.

Now on to how to order. You tell me what you want, then I order it. Then when it comes, I give you the lights and you give me money. If you don't give me the money, I pee in your gas tank. Easy

Oh, I almost forgot to put in a deadline. I'll order on the 15th of October, my payday (for obvious reasons).

 

so tonite on my way back from portage i ran into to fimilar faces...

one being 350Z Toyko Drift style! i called him to roll down his window..he did..told him..hey i raced u at the track...wanna do it again he rolled up his window..i three honked and we took off...he WALKED me like 2 cars when we ened in 3rd...

2nd face was the Blue RSX /w Carbonfiber trunk/hood and full bolt ons! i meet him on sterling and we went from a dig, i had him a good car off the line and added keept it thro 2nd..shifting into 3rd i missed...didnt grind but missed..hit it again and he picked up and got a car on me..i still think he would have beat me even if i didnt miss..cuz he was gaining ground fast,
we talked after and i told him i missed 3rd but u still woulda taken me and he agreed and asked if i was supercharged..i replyed nope naturaly asperated, he replyed saying you did pretty good for a NA, i said to him thanks you wanna go again? and he said..nah its ok maybe next time and we went our ways

funny thing is i always see this guy in the car wash..so hopefully by next spring i get my chance at him again with a few more bolt ons

 

Hey Courtney, could I get 1 Trunk light, the one you were selling, and can I get a dome light for inside, I cannot find one on their website for that?? if you can, that would be awsome

1X Trunk Light
1X Dome Light


and thank you richard for helping me get started on the lights, I'm going right now to see if I can just finish it up real quick, sadly I'm busy later today so I don't have time to finish it, I'll let you know though, but thanks again, I'll buy you a case of beer or something ^_^

 

u dont have a dome u have a sunroof rite?

 

aw crap, your right, is there lights for where the review mirror is, to replace those??

 

map lights if im not mistaken

 

i miss you guys lol , work is stupid, we got to get together one of these days before it gets to cold , let me know

 

we should all meet sometime durning the week (preferably monday-wednesday night cuz i work thursday/friday

if that sounds appeling to anyone...post it up...we could all meet at the cobalt customs shop (Richards garage :P )

 

WED COULD BE GOOD FOR ME

 

*removed by moderation

 

Any chance a throttlebody off of a 4.2L from a colorado can end up in your pocket? And then when i come to see it some $$ might just drop out of my pocket LOL.




ill add to neutrino's list........

Turbo kit......PM for prices.

 

heh, I couldn't finish up on the lights I somewhat tried... but yeah, if something is happening wednesday, I'll give you some $$, or some beer since you lent me the wires, and some velcro

 

its a date!

 

**** i didnt know you could do springs...i may hit you up very soon

 

VELCRO.... WHAT THE HELL ARE YOU GUYS DOING WITH LIGHTS AND VELCRO?

 

so the lights stay under the dash, and glove box

 

Zip ties my friend..thats the jeffery exclusive when u get ur lights done at his autobody shop (Wal-mart parking lot)