Calgary - random talk thread
Senior Member
Senior Member
all that work your doing porting and working on the heads ect... and all he wants is a t25? they are **** turbos for making power, my friends 240 went from a t-25 to a t28 and it doesn't reach full boost until like 4000rpm and guess what they both suck at making power. my turbo is at full boost at least 1000rpm sooner and makes 50+whp on the same dyno.
Senior Member
all that work your doing porting and working on the heads ect... and all he wants is a t25? they are **** turbos for making power, my friends 240 went from a t-25 to a t28 and it doesn't reach full boost until like 4000rpm and guess what they both suck at making power. my turbo is at full boost at least 1000rpm sooner and makes 50+whp on the same dyno.
Senior Member
tell him you refuse to help him put the t25 back in and if he thinks its too fast then buy a prius. the first time i drove my car when it was tuned i though it was way to fast, now with lots of bolt ons and the k04R it basically makes me yawn because i am so used to it.
Well greetings from Saskatoon
Jon Mark and a few others I got to meet while waiting for loads for the big rig
If you can't figure out who I am.. we'll play 20 questions ..
Sold my 03 hemi ram, and got a 04 redline.. Needs some TLC!!!
204,000 km's and the young punk couldn't keep her running.. so im restoring it.
Nice to see some of you.. I'll be back in Cowtown once the redlines up and running to it's glory.
I'll post pictures here in a few days .
P.S Taylor... I'll need a tune once im done.. thinking tvs
Jon Mark and a few others I got to meet while waiting for loads for the big rig
If you can't figure out who I am.. we'll play 20 questions ..
Sold my 03 hemi ram, and got a 04 redline.. Needs some TLC!!!
204,000 km's and the young punk couldn't keep her running.. so im restoring it.
Nice to see some of you.. I'll be back in Cowtown once the redlines up and running to it's glory.
I'll post pictures here in a few days .
P.S Taylor... I'll need a tune once im done.. thinking tvs
Senior Member
Well greetings from Saskatoon
Jon Mark and a few others I got to meet while waiting for loads for the big rig
If you can't figure out who I am.. we'll play 20 questions ..
Sold my 03 hemi ram, and got a 04 redline.. Needs some TLC!!!
204,000 km's and the young punk couldn't keep her running.. so im restoring it.
Nice to see some of you.. I'll be back in Cowtown once the redlines up and running to it's glory.
I'll post pictures here in a few days .
P.S Taylor... I'll need a tune once im done.. thinking tvs
Jon Mark and a few others I got to meet while waiting for loads for the big rig
If you can't figure out who I am.. we'll play 20 questions ..
Sold my 03 hemi ram, and got a 04 redline.. Needs some TLC!!!
204,000 km's and the young punk couldn't keep her running.. so im restoring it.
Nice to see some of you.. I'll be back in Cowtown once the redlines up and running to it's glory.
I'll post pictures here in a few days .
P.S Taylor... I'll need a tune once im done.. thinking tvs
Senior Member
its Jeremy (aka also known as blacksmoke)!!!!!!!!!!!!!!!!!!! merry Christmas my good friend, I hope all is well and that big belly full of food. hahahaha
Jeremy is from Saskatoon and was one of the originals of the tvs outbreak in Saskatoon like 6/7 years ago. how is that new redline treating you? get that exhaust looked at? im personally glad to see you back in the delta platform. if you need some help waking that biatch up come see us down at dogsled performance and custom.
Jeremy is from Saskatoon and was one of the originals of the tvs outbreak in Saskatoon like 6/7 years ago. how is that new redline treating you? get that exhaust looked at? im personally glad to see you back in the delta platform. if you need some help waking that biatch up come see us down at dogsled performance and custom.
Senior Member
nice Jeremy. good buy. I don't have any down pipes, however if this 1900 is successful then I will have a lot of parts avail. it calls for even bigger stuff then I am already running. I would damn near have to replace everything. intake, exhaust, heat exchangers, injectors, pnp sc and pulley. I may even replace the TB too. we will see what they find out about the 1900. if they hit 550whp on e85 then I am in. that should get me over 400(im guessing around 450) on pump and meth, which is where I need to be to keep up with these turbo guys around here.
its about time they did some R&D on some sc set ups. turbo's are great but they lack ***** out noise. I like noise!
its about time they did some R&D on some sc set ups. turbo's are great but they lack ***** out noise. I like noise!
Got Bewst?
iTrader: (8)
nice Jeremy. good buy. I don't have any down pipes, however if this 1900 is successful then I will have a lot of parts avail. it calls for even bigger stuff then I am already running. I would damn near have to replace everything. intake, exhaust, heat exchangers, injectors, pnp sc and pulley. I may even replace the TB too. we will see what they find out about the 1900. if they hit 550whp on e85 then I am in. that should get me over 400(im guessing around 450) on pump and meth, which is where I need to be to keep up with these turbo guys around here.
its about time they did some R&D on some sc set ups. turbo's are great but they lack ***** out noise. I like noise!
its about time they did some R&D on some sc set ups. turbo's are great but they lack ***** out noise. I like noise!
I figure if I get everything done and ready, 1900 + supporting mods, i'll be around 6500 total for the car, and parts
Not bad for a cheap car..
Blue!!! Thought is living in Calgary, Had a tvs cobalt.. red, you know Courtney..
Been living there for 2 years almost..
Also i'll be in wpeg in a week or two..
Not bad for a cheap car..
Blue!!! Thought is living in Calgary, Had a tvs cobalt.. red, you know Courtney..
Been living there for 2 years almost..
Also i'll be in wpeg in a week or two..
Blue, lol I screwed up.. Thought aka Courtney is in Winnipeg been there for about a year or 2 Sold his tvs balt and got a sti
I might be taking a position out in wpeg.. why I might be there
I might be taking a position out in wpeg.. why I might be there
Clearly you haven't heard an LSJ-T with open dump lol. My tubro set up makes my TVS set up sound like a little bitch lol. It's loud. When I dyno'd at speed factor on their dyno day everyone had their ears plugged haha. But the best part is it's still super quiet out of boost.
I figure if I get everything done and ready, 1900 + supporting mods, i'll be around 6500 total for the car, and parts
Not bad for a cheap car..
Blue!!! Thought is living in Calgary, Had a tvs cobalt.. red, you know Courtney..
Been living there for 2 years almost..
Also i'll be in wpeg in a week or two..
Not bad for a cheap car..
Blue!!! Thought is living in Calgary, Had a tvs cobalt.. red, you know Courtney..
Been living there for 2 years almost..
Also i'll be in wpeg in a week or two..
Mark, I think you forgot a huge factor in my pricing.. I got my car for under 2500. add 4500 and im at 6500. As for shipping.. I'll be running stateside in a few weeks.. I can save on the shipping costs. And I got enough address's in Minot / Bismark ND to get the parts shipped, I drive by twice a week
Exchange rate.. it's workable.
2400 for a tvs, 2700 for the 1900
ps. my spare 2.0 lsj is still in the crate
I think im alittle better off. no payments, no bills other then food/cell with my income.. can be and might be done by May.
then hit up Taylor for a tune
Exchange rate.. it's workable.
2400 for a tvs, 2700 for the 1900
ps. my spare 2.0 lsj is still in the crate
I think im alittle better off. no payments, no bills other then food/cell with my income.. can be and might be done by May.
then hit up Taylor for a tune
Senior Member
Why do I hate your car mark? I believe both jons and your exhausts are too loud and I just think your car deserves a bigger sc bolted to if fir all the work you've done to it