Saskatoon and area random 'blah-blah' thread about junk we like to wammer about...
#1228
So take a wild guess who snapped another wheel stud this weekend?
Yep, that'd be me. This is the THIRD wheel stud I have snapped on this car. I have never used any impact air tools to remove or tighten the lugs, it has always been by hand.
Horseshit.
Yep, that'd be me. This is the THIRD wheel stud I have snapped on this car. I have never used any impact air tools to remove or tighten the lugs, it has always been by hand.
Horseshit.
#1229
Tyler arent you on 60# injectors??? If you are how the hell are you figuring out your mileage?? not from your DIC because that is no longer correct. If you found a way to make that correct you have to let me know becuase I have playes with mine and nope, its about .5 to .75 liters/100kmh off. I have flow matched 62s with flow rates from -30kpa to +115kpa documented and there is no way I can make the DIC correct due to running out of IFR table.
I have to do the old fashioned filler up and calculate mileage. Let me know if you found a way to make this correct.
OH, Raptors you want a snap back,,,???? sure, You beat a stage 2 car with stock injectors,......
.................................................. .... BUT WHO HAS THEIR ORIGINAL ENGINE???
I have to do the old fashioned filler up and calculate mileage. Let me know if you found a way to make this correct.
OH, Raptors you want a snap back,,,???? sure, You beat a stage 2 car with stock injectors,......
.................................................. .... BUT WHO HAS THEIR ORIGINAL ENGINE???
I know my DIC is within 1% error, cause I check it against actual fuel used and distance traveled every month or so.
Maybe I wouldn't have been so stressed out if I wasn't so dumb that day. Damn E67 ECU's.
#1230
So don't feel so bad heh.
#1231
I won't say his name to save him from embarassment...but he runs the G5 club...anyways, he left his torque wrench at 100 when he last put it away...then he went to use it a while later and he wasn't clueing into why the wrench wouldn't start clicking...then he snapped his wheel stud.
So don't feel so bad heh.
So don't feel so bad heh.
I also know who it is!!! lol
you never showed up this weekend? what gives? we were even waiting at the airport sunday night.... well taking pictures at the air port...
#1232
I want to make the trip before it gets too cold, I just don't know when. Having some instrumentation problems with the airplane I would like to get sorted out before I go flying into class C airspace blind.
#1234
It was good you didn't go, it was rougher than hell... One guy took a bunch of people up about an hour earlier and his passenger got sick hahaha... It was kinda nice, I didn't end up going anywhere, I just took the opportunity to work the controller to the max and ask for a bunch of oddball stuff (since all the fair weather pilots were out of my way) so I could push the limits of the airplane in the 45-50km/hr winds blowing right at my side. It was fun haha, did a bunch of carrier landings and stuff.
#1235
I average 8.8L/100km with a heavy foot and average highway speed of 125-130. I'm not going to complain. But once the warranty is up, i will likely be looking for a tune.
I have done a "light foot" mode and made 6.7 L/100km on ST II... impressive, but i feel sad driving at 110 and not passing people. And doing the actual posted speed limit everywhere.
On a side note, i increased my recorded top speed to 237kph last weekend. Up from 230. Then i ran into traffic. Its hard to get the right conditions to do a top speed run... I'll get a pic of my GPS when i get home.
I have done a "light foot" mode and made 6.7 L/100km on ST II... impressive, but i feel sad driving at 110 and not passing people. And doing the actual posted speed limit everywhere.
On a side note, i increased my recorded top speed to 237kph last weekend. Up from 230. Then i ran into traffic. Its hard to get the right conditions to do a top speed run... I'll get a pic of my GPS when i get home.
Last edited by Silver Bullet; 09-29-2008 at 07:11 PM. Reason: Automerged Doublepost
#1236
#1238
yo anyone wanna buy a rc drift car its a s15 any question just ask
its only been used 4 times
its only been used 4 times
Last edited by stoon_cobalt_colby; 09-29-2008 at 11:47 PM. Reason: Automerged Doublepost
#1239
#1240
#1242
no he just doesnt like you.
Last edited by supa_chgd_07; 09-30-2008 at 02:45 AM. Reason: Automerged Doublepost
#1243
Rippin07, i was driving my car (black SS2.4) i was headed south down Central, you were headed north. I also had my black steelies on. (booooo, lol) First thing that i noticed was the HE. First thought came to mind was an intercooler, then quickly remembered seeing your car at one of the meets this summer. Typically I hate silver cars, but I have a soft spot for the Silver SC's.
Last edited by Dj_BuCa; 09-30-2008 at 10:21 AM.
#1245
You're annoying, your mods are tasteless and pointless along with your posts. You ask stupid questions, you're cluless about cars, and I simply don't like you. I can't be any more clear about it. My new name for you is Taint. Recess is over, Taint, go back to IA ad make me an ash tray, Bitch.
Rippin07, i was driving my car (black SS2.4) i was headed south down Central, you were headed north. I also had my black steelies on. (booooo, lol) First thing that i noticed was the HE. First thought came to mind was an intercooler, then quickly remembered seeing your car at one of the meets this summer. Typically I hate silver cars, but I have a soft spot for the Silver SC's.
Rippin07, i was driving my car (black SS2.4) i was headed south down Central, you were headed north. I also had my black steelies on. (booooo, lol) First thing that i noticed was the HE. First thought came to mind was an intercooler, then quickly remembered seeing your car at one of the meets this summer. Typically I hate silver cars, but I have a soft spot for the Silver SC's.
#1246
Write that down.