Drivetrain Transmission, LSD, Clutch, Driveline, Axles...

F40 kit Discontinued?

Thread Tools
 
Search this Thread
 
Old 10-05-2015 | 10:44 PM
  #51  
LNFwagonSS's Avatar
Senior Member
 
Joined: 06-05-12
Posts: 700
Likes: 24
From: Omaha
Originally Posted by InfraRedline
I may be an exception because I'm a Redline and don't have the calculated gas mileage or miles to empty on my dash, but I have an original F40 kit and I just used the speedo input data in HPTuners from a stock 2004 Redline as a starting point and made some minor tweaks and it reads speed and miles correctly. Remember, the 2004 Redlines had an external tone ring on the intermediate shaft that the VSS read. When I first took it out it read speed and miles way off, so I started with the 04 settings in HPT and they were very close.
Good info. I really could care less about trip/range miles anymore. I gave up fuel range when I started running ethanol. As long as mph are within 1-2 and recorded vehicle mileage doesn't add up faster I think is 100% acceptable.
Old 10-07-2015 | 08:37 AM
  #52  
crashher0's Avatar
Thread Starter
Senior Member
iTrader: (2)
 
Joined: 06-20-13
Posts: 510
Likes: 1
From: Indiana
Originally Posted by LNFwagonSS
Annnnnnnnd, the kit has been taken off the ZZP website
Shocker haha wonder if they sold out or ran into another problem
Old 10-19-2015 | 02:15 AM
  #53  
LNFwagonSS's Avatar
Senior Member
 
Joined: 06-05-12
Posts: 700
Likes: 24
From: Omaha
Originally Posted by crashher0
Shocker haha wonder if they sold out or ran into another problem
I guess we will never know. There are plenty of ZZP employees on this forum who have had months to post a response but seem to be avoiding this thread like the plague. My F40 will be up for sale soon if we don't get some strait answers. I would just email them again but they need to respond here for everyones info.
Old 10-19-2015 | 01:42 PM
  #54  
crashher0's Avatar
Thread Starter
Senior Member
iTrader: (2)
 
Joined: 06-20-13
Posts: 510
Likes: 1
From: Indiana
Originally Posted by LNFwagonSS
I guess we will never know. There are plenty of ZZP employees on this forum who have had months to post a response but seem to be avoiding this thread like the plague. My F40 will be up for sale soon if we don't get some strait answers. I would just email them again but they need to respond here for everyones info.
after a few tangent answers and this thread I have given up hopes of F40 and just started looking for a new F35 either 4.45 if the price was right or just find a LSD to replace my non LSD. I have given up hope
Old 10-19-2015 | 06:06 PM
  #55  
LNFwagonSS's Avatar
Senior Member
 
Joined: 06-05-12
Posts: 700
Likes: 24
From: Omaha
Originally Posted by crashher0
after a few tangent answers and this thread I have given up hopes of F40 and just started looking for a new F35 either 4.45 if the price was right or just find a LSD to replace my non LSD. I have given up hope
The shitty part is that while the 445 can handle a bit more stress, its terrible gearing for high speed roll racing. The weakest parts of the f35 are the case, and 3rd gear. The case can be addressed with bracing but 3rd gear is an explosion waiting to happen on cars with decent Tq.
Old 10-21-2015 | 02:49 AM
  #56  
taintedred07's Avatar
Senior Member
iTrader: (1)
 
Joined: 11-03-12
Posts: 1,358
Likes: 1
From: Plano, TX
I know you've waited a long time, but I'm sure they'll put those kits back online sooner or later. I believe they still sell other f40 accessories like the clutch kit and tob even. Don't get rid of your f40!
Old 01-28-2016 | 11:46 PM
  #57  
taintedred07's Avatar
Senior Member
iTrader: (1)
 
Joined: 11-03-12
Posts: 1,358
Likes: 1
From: Plano, TX
You can order the kit now, they have a few in stock. You just have to email them and then send a custom payment.
Old 01-29-2016 | 01:08 AM
  #58  
blu3_v1p3r's Avatar
Senior Member
iTrader: (6)
 
Joined: 09-24-06
Posts: 4,532
Likes: 190
From: Virginia Beach, VA
Originally Posted by taintedred07
You can order the kit now, they have a few in stock. You just have to email them and then send a custom payment.
Lol email them so it can take th 3 weeks to respond.... last I heard they still do not have the intermediate shaft.
Old 01-29-2016 | 03:19 AM
  #59  
cranemaster's Avatar
Senior Member
 
Joined: 08-22-10
Posts: 2,293
Likes: 2
From: Saskatchewan, Canada
Originally Posted by Snail_SS
Ohh yeah I remember you where waiting for the kit since last BF lol
6 speed would be amazing for our cars, sad it's it's such a PITA.
Old 01-29-2016 | 11:29 AM
  #60  
taintedred07's Avatar
Senior Member
iTrader: (1)
 
Joined: 11-03-12
Posts: 1,358
Likes: 1
From: Plano, TX
It's in stock and on their site now, they just added it. At the bottom of the transmission and drivetrain section.
Old 01-29-2016 | 12:09 PM
  #61  
LNFwagonSS's Avatar
Senior Member
 
Joined: 06-05-12
Posts: 700
Likes: 24
From: Omaha
Of ******* course. Sold mine. Shipped it out couple days ago. I was tired of dealing with zzp run around bullshit, I'll spend my 2k+elsewhere. Not too upset tho. The thing with the f40, IMO, if you are not making big power then it's not worth it. The trans is a heavy bitch, not to mention the extra rotational mass inside. Dual mass flywheels also add to that mass. I believe the f35 can be made to last in the 400-450 wtq range. Above that, f40 all the way.
Old 01-29-2016 | 05:25 PM
  #62  
taintedred07's Avatar
Senior Member
iTrader: (1)
 
Joined: 11-03-12
Posts: 1,358
Likes: 1
From: Plano, TX
I tried to tell you man! What are you running now? Just grab another f40 as a side project.
Old 01-29-2016 | 06:52 PM
  #63  
LNFwagonSS's Avatar
Senior Member
 
Joined: 06-05-12
Posts: 700
Likes: 24
From: Omaha
Originally Posted by taintedred07
I tried to tell you man! What are you running now? Just grab another f40 as a side project.
Oh believe me, I would've kept it had I not decided to lower my HP goals from 500-550 to 400-450. Your build is more ideal for f40 though!
I'm still running my reinforced 4.45. Still in one piece after roughly 10k mile of hard running. Will b dropping it here soon and swapping with this 405 I'm working on.
Old 01-29-2016 | 07:09 PM
  #64  
KMO43's Avatar
Senior Member
 
Joined: 01-21-12
Posts: 6,823
Likes: 84
From: Calgary
This is great news! I really dont know how far my 4.05 will get me
Old 03-25-2016 | 02:19 PM
  #65  
Biohazd's Avatar
New Member
iTrader: (6)
 
Joined: 07-03-07
Posts: 111
Likes: 5
From: L-Town
If it's a "recorded mileage" issue, State or Federal Laws come into play. If it's found that this kit is causing inaccurate reading, they possibly could face penalties. If these cars are Off Road use only it wouldn't matter but I'm sure ZZP knows the mass majority will be used for street use.
Old 03-26-2016 | 02:32 PM
  #66  
LNFwagonSS's Avatar
Senior Member
 
Joined: 06-05-12
Posts: 700
Likes: 24
From: Omaha
Originally Posted by Biohazd
If it's a "recorded mileage" issue, State or Federal Laws come into play. If it's found that this kit is causing inaccurate reading, they possibly could face penalties. If these cars are Off Road use only it wouldn't matter but I'm sure ZZP knows the mass majority will be used for street use.
From the info I've gathered, it does not change the recorded milage assuming you make the proper speedo adjustments. The issue is fuel mileage calculations as that is a BCM calculation. Trifecta may be able to tap into it but if your the type of person to buy a 6sp swap, you probably don't care about calculated fuel mileage

There has to be some give to those laws as something as simple as tire size change or even worn out tires would alter recorded vehicle miles.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
taintedred07
2.0L LNF Performance Tech
32
05-28-2022 03:47 AM
dennis69
Appearance
9
10-20-2015 04:49 PM
Jesse
Problems/Service/Maintenance
2
09-28-2015 12:51 PM
ashalle2
Parts
1
09-27-2015 03:28 PM
metroplex
Appearance
0
09-27-2015 07:48 AM



Quick Reply: F40 kit Discontinued?



All times are GMT -4. The time now is 02:40 AM.