NFSGA

I am planning on moving my system into my new ss next weekend. Has anyone on these boards built custom boxes to go in the trunk behind the wheelwell to save space?

MichiganMike

I haven't personally, but you may want to measure everything out before trying to squeeze it in there, if you have a pre-made box.

The dimensions of the trunk are ludicrous. Like only a 13 or 13 1/2" opening. Most boxes would not fit for me, but I am sure after a year, someone has come out with something to combat the problem.

xspyder85x

i put an amp rack there, im sure that you could put a small sub, it wouldnt be too hard

xspyder85x

that space is like 7 or 8 inches deep for it to look good

NFSGA

Well, I'm going to put the two elemental designs subs that I have in. They are only 10's and need a .5 cubic foot sealed box. It looked like enough room last time I looked. My car isn't here at the moment so I can't check.

xspyder85x

should be, it will be easier to mount it on the left side, there is a hole already in the wall that you can use to secure the box

cawpin

There is plenty of room for a 10. I'm planning a box for my MTX 12 in the same location. I'm extending it up the inside of the wheel well to add a little air space.

05BlackCobaltSS

The SS/SC comes with a box stock back there. I'm sure you could get one for the left side, but not sure aboutthe right.