Electronics, Audio, and Video All Audio, Video, Alarms, and all other electronics

Build on a boat (for work)

Thread Tools
 
Search this Thread
 
Old 03-04-2009, 11:09 PM
  #1  
Junior Member
Thread Starter
 
stinkyfisherman's Avatar
 
Join Date: 10-04-07
Location: lewisville tx
Posts: 446
Likes: 0
Received 0 Likes on 0 Posts
Build on a boat (for work)

Ok so at work for the past three days I've been slaving over this boat. We had to do a ton of crap to it.... a new radio, two amps, two subs, six speakers and wire in about 50 led's.

This is the hu and the subs, its a cda-9886 and two pdx amps. The hu is in the mid cabin with the iPod cable coming out from the back of the seats. The amps are under the bench seat in the compartment the back or "stern" (if you'd like to be nautical).




Now its the speakers six marine alpine type-s. Two up front or "bow," two right behind the seats and two more in the front of the bench seat. all of the speakers have three led's that we had to wire up and run all the wires for.



The subs are up next two jl marine ib's. Mounted underneath the dash (if thats called a dash lol) These also were wired up with 4 led's. holes had to be cut and wires ran.




Finally we had to wire in about 15 or so led's all the way around the engine compartment so when he want so show off he can just raise the hatch and it lights on up. Then also a picture of the speakers with the led's on. We also put some in the cup holders and the side panel pockets. Sorry for the crapy night pictures.





Good ol' fashion fun!! This beast ended up turrning out really clean he was extremely happy. It also got loud as hell and those subs pounded for two tens.

This is whats been keeping me from my car. Oh well she'll get done... eventually.
Old 03-05-2009, 12:52 AM
  #2  
Senior Member
iTrader: (5)
 
EmperorJJ1's Avatar
 
Join Date: 09-03-06
Location: OR
Posts: 19,438
Received 31 Likes on 29 Posts
nice. i hate working on boats personally
Old 03-05-2009, 12:59 AM
  #3  
Banned
 
dman090's Avatar
 
Join Date: 11-08-07
Location: Huntington, Texas
Posts: 6,041
Likes: 0
Received 0 Likes on 0 Posts
good stuff
Old 03-05-2009, 02:38 AM
  #4  
Junior Member
Thread Starter
 
stinkyfisherman's Avatar
 
Join Date: 10-04-07
Location: lewisville tx
Posts: 446
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by EmperorJJ1
nice. i hate working on boats personally
Yea they arnt fun to work on and you get all itchy too, that blows.

Originally Posted by dman090
good stuff
thanks

Last edited by stinkyfisherman; 03-05-2009 at 02:38 AM. Reason: Automerged Doublepost
Old 03-07-2009, 08:36 PM
  #5  
Senior Member
iTrader: (5)
 
Cefaln452's Avatar
 
Join Date: 05-20-08
Location: Cincinnati
Posts: 5,601
Likes: 0
Received 0 Likes on 0 Posts
I <3 working on boats... and they make marine products for a reason... Dont hate
Old 03-07-2009, 09:46 PM
  #6  
Junior Member
Thread Starter
 
stinkyfisherman's Avatar
 
Join Date: 10-04-07
Location: lewisville tx
Posts: 446
Likes: 0
Received 0 Likes on 0 Posts
^^^ He thought he picked up the marine pdx's and 9886 but no. I want to see those, I've hurd they look sweet.
Old 03-07-2009, 09:55 PM
  #7  
Senior Member
iTrader: (2)
 
Gestapo007's Avatar
 
Join Date: 05-10-08
Location: Kure Beach, NC
Posts: 11,788
Likes: 0
Received 0 Likes on 0 Posts
that is hot as ****. I work at a marina so i can appreciate this lol
Old 03-07-2009, 11:07 PM
  #8  
Senior Member
iTrader: (5)
 
Cefaln452's Avatar
 
Join Date: 05-20-08
Location: Cincinnati
Posts: 5,601
Likes: 0
Received 0 Likes on 0 Posts
Its not that they look sweet, its the purpose of them... And alpine marine is just painted white.. Junk... I hate companies that say yeah we have marine product (WHITE PAINT) they think we wont ever figure it out... But props like the leds
Old 03-07-2009, 11:44 PM
  #9  
Senior Member
iTrader: (5)
 
EmperorJJ1's Avatar
 
Join Date: 09-03-06
Location: OR
Posts: 19,438
Received 31 Likes on 29 Posts
have you seen the fosgate marine stuff? looks badass
Old 03-08-2009, 04:12 AM
  #10  
Junior Member
Thread Starter
 
stinkyfisherman's Avatar
 
Join Date: 10-04-07
Location: lewisville tx
Posts: 446
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Gestapo007
that is hot as ****. I work at a marina so i can appreciate this lol
I with I could get better pictures at night cuz those led's looked badass.

Originally Posted by Cefaln452
Its not that they look sweet, its the purpose of them... And alpine marine is just painted white.. Junk... I hate companies that say yeah we have marine product (WHITE PAINT) they think we wont ever figure it out... But props like the leds
The pdx marine is rated to be marine grade. I dont remember what the rating is but they have to stand up to a certan amount of water for a time to be "marine"

Originally Posted by EmperorJJ1
have you seen the fosgate marine stuff? looks badass
I've seen some but not much I'l have to take a look
Old 03-08-2009, 01:01 PM
  #11  
Senior Member
iTrader: (5)
 
Cefaln452's Avatar
 
Join Date: 05-20-08
Location: Cincinnati
Posts: 5,601
Likes: 0
Received 0 Likes on 0 Posts
The rockford stuff looks cool... but if you've heard their hi's before... these are even harsher.... I'm a big fan of the Memphis marine and JL stuff is okk
Old 03-08-2009, 01:51 PM
  #12  
Senior Member
iTrader: (5)
 
EmperorJJ1's Avatar
 
Join Date: 09-03-06
Location: OR
Posts: 19,438
Received 31 Likes on 29 Posts
ya their coaxs have sounded pretty bright but the new 09 stuff sounded badass at ces
Old 03-08-2009, 04:28 PM
  #13  
Senior Member
iTrader: (1)
 
Spun's Avatar
 
Join Date: 12-23-07
Location: Lower Mainland B.C.
Posts: 1,665
Likes: 0
Received 1 Like on 1 Post
Yeah I did a small system in our boat but no subs or anything. I think mine was different though since most of the build was done in the forward cabin. Plus mine was in the water while I was working on it which made it a bit more interesting
That looks like a little speed boat of some sorts, def not a Sea Ray, looks like its sporting the Bayliner colors.
What kind, size boat is that
Old 03-08-2009, 09:39 PM
  #14  
Junior Member
Thread Starter
 
stinkyfisherman's Avatar
 
Join Date: 10-04-07
Location: lewisville tx
Posts: 446
Likes: 0
Received 0 Likes on 0 Posts
It was a 28' Donzi. I dont remember what the model was exactly ZI or something, its an 04.
Old 03-08-2009, 11:14 PM
  #15  
Senior Member
iTrader: (1)
 
Spun's Avatar
 
Join Date: 12-23-07
Location: Lower Mainland B.C.
Posts: 1,665
Likes: 0
Received 1 Like on 1 Post
Nice Boat!!!

We had a 38' Baja around the same year, I think it might have been an 02 or an 03, it was awsome but it was no Donzi.
Only boat nicer than that IMO is the Fountain boats, but they cost alot of money.

We sold our boat about a year and a half ago, my parents just couldn't enjoy it anymore, IMO it was too big for them to keep up. So they sold it and bought a vaction spot in Palm Springs in which they are at right now
Old 03-09-2009, 12:56 AM
  #16  
Senior Member
iTrader: (5)
 
Cefaln452's Avatar
 
Join Date: 05-20-08
Location: Cincinnati
Posts: 5,601
Likes: 0
Received 0 Likes on 0 Posts
Haha you have great taste. We have a 38fountain lightning. Also outerlimits are nice and our 36 nortech cat are sweet.

Last edited by Cefaln452; 03-09-2009 at 12:57 AM. Reason: Automerged Doublepost
Old 03-09-2009, 01:15 AM
  #17  
Junior Member
Thread Starter
 
stinkyfisherman's Avatar
 
Join Date: 10-04-07
Location: lewisville tx
Posts: 446
Likes: 0
Received 0 Likes on 0 Posts
I put a hole system into a 36' fountain lightning boat was so nice. I've done some nice rides, like a 1m dollar touring bus put a sub in the slide and all new audio.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
taintedred07
2.0L LNF Performance Tech
32
05-28-2022 03:47 AM
RaginChopsuey
War Stories
16
10-27-2015 01:27 PM
dennis69
Appearance
9
10-20-2015 04:49 PM
SSLOW06
Complete Cars
1
10-01-2015 07:21 PM
GBRunner24
Featured Car Showcase
3
09-26-2015 06:44 PM



Quick Reply: Build on a boat (for work)



All times are GMT -4. The time now is 04:02 PM.