09turbo

if i wire an LED strip as a glove box light, where is a good place to run it through the firewall to get to the positive poll of the fuse box... or can i use an unused slot in the fuse box, and just a random ground somewhere? any help would be great!!!
thanks

-Casey

ZeeBee

just use the side panel on the passenger side, find a 12v remote source and tap it.

OneCOLDBIZL272

iTrader: (2)

x2^^^

09turbo

just a random one? i cant go outside and look at it at this time of night lol
and i was thinking about getting a pin switch so it lights up only when its open

OneCOLDBIZL272

iTrader: (2)

look on the side onthe passanger side floor on the left under the glove box by the shifter, but more by the feet. that panel has a line down it, it comes off, there a bunch of fuse there.

NWAE Cobalt

iTrader: (1)

you can do that or use a switch and a 12 volt pos (cig lighter wire) or get fancy and wire it AFTRE the switch for the dome light so when that is on so is your glove box...

09turbo

i have a sunroof so...are the wires seperate for the map lights when the door is open and when it is on with the button?
i wanna be really clean with it. idk how to but i wanna use a latch thing, like the door sensors, so when its open, its on.

NWAE Cobalt

iTrader: (1)

go for it

09turbo

i will be making a trip to autozone tomorrow to see if they have a pin switch type deal.

NWAE Cobalt

iTrader: (1)

sweet!!! keep us updated...

09turbo

i am also doing a retrofit 3rd brake light, and the 'skyline' inner tails

yay wireing