help needed speakers wont work
#1
Senior Member
Thread Starter
iTrader: (3)
Join Date: 08-08-10
Location: Texas
Posts: 1,824
Likes: 0
Received 0 Likes
on
0 Posts
help needed speakers wont work
so i just installed my new screen its a pionner avh-p4000 it turns on and all that but i have no sound at all from it.i wired it up exactly how i did my old pionner hu but idk why it wont work
everything is connected except this stuff
orange ill wire
purple reverse gear signal
and i dont have a antenna wire in it
any help would be nice
everything is connected except this stuff
orange ill wire
purple reverse gear signal
and i dont have a antenna wire in it
any help would be nice
#9
Senior Member
Thread Starter
iTrader: (3)
Join Date: 08-08-10
Location: Texas
Posts: 1,824
Likes: 0
Received 0 Likes
on
0 Posts
so mad lol
so i messed with it more and noticed below
when the avh-p4000 is plugged in my amp does not turn on but when i plug in my other hu my amp does come on but there both wire the same??
i researched what i could on this i noticed in a thread someone with the same hu said that they had to wire the yellow wire to the red and red to the yellow? currently i have yellow-yellow red-red
so i messed with it more and noticed below
when the avh-p4000 is plugged in my amp does not turn on but when i plug in my other hu my amp does come on but there both wire the same??
i researched what i could on this i noticed in a thread someone with the same hu said that they had to wire the yellow wire to the red and red to the yellow? currently i have yellow-yellow red-red
#13
Senior Member
Thread Starter
iTrader: (3)
Join Date: 08-08-10
Location: Texas
Posts: 1,824
Likes: 0
Received 0 Likes
on
0 Posts
i took the blue/white wire from the pioneer harness and connected it to the red wire that i tapped to my wiper blades
i really wish there was a picture of a harness thats acctually wired right to look at as a guide
i really wish there was a picture of a harness thats acctually wired right to look at as a guide
Last edited by Ting-ting; 01-24-2011 at 02:06 AM. Reason: Automerged Doublepost
#19
Senior Member
Thread Starter
iTrader: (3)
Join Date: 08-08-10
Location: Texas
Posts: 1,824
Likes: 0
Received 0 Likes
on
0 Posts
this is the harness layout to the pioneer hu its on pic 2
http://www.pioneerelectronics.com/St...Manual0123.pdf
http://www.pioneerelectronics.com/St...Manual0123.pdf
#21
Senior Member
Thread Starter
iTrader: (3)
Join Date: 08-08-10
Location: Texas
Posts: 1,824
Likes: 0
Received 0 Likes
on
0 Posts
ok ill try and if it is busted on the pioneer then what??
also i got this schosche interface kit that says it works for are car i figured id try it so im using it now idk if that has anything to do with it.ill take a pic
the acc is red or yellow haha??
also i got this schosche interface kit that says it works for are car i figured id try it so im using it now idk if that has anything to do with it.ill take a pic
the acc is red or yellow haha??
Last edited by Ting-ting; 01-24-2011 at 02:48 AM. Reason: Automerged Doublepost
#23
Senior Member
Thread Starter
iTrader: (3)
Join Date: 08-08-10
Location: Texas
Posts: 1,824
Likes: 0
Received 0 Likes
on
0 Posts
ill brb
do you want me to leave the red connected the the radio as well or just the blue wire
do you want me to leave the red connected the the radio as well or just the blue wire
Last edited by Ting-ting; 01-24-2011 at 02:50 AM. Reason: Automerged Doublepost
#24
Senior Member
Thread Starter
iTrader: (3)
Join Date: 08-08-10
Location: Texas
Posts: 1,824
Likes: 0
Received 0 Likes
on
0 Posts
Ok I undid the red so the radio red wasn't connected to the red I hard wired
So I took the red from the wiped blade andi connected it to just the remote on the metras harness and yes the amp turns on but since I don't have the red connected to the red on my hu my radio stayed off...so now what are my options
So I took the red from the wiped blade andi connected it to just the remote on the metras harness and yes the amp turns on but since I don't have the red connected to the red on my hu my radio stayed off...so now what are my options