LEDglow install help
#1
Member
Thread Starter
Join Date: 05-28-09
Location: Fayetteville, NC
Posts: 256
Likes: 0
Received 0 Likes
on
0 Posts
LEDglow install help
So I bought LEDglow's interior kit. I am using the mini add a fuse and plugging it into fuse #20 inside the car which is for the sunroof. I am grounding it on the metal bolt near the fuse box inside the car. But it won't light up? Any suggestions on what I might have done wrong.
#3
AWD > FWD
iTrader: (2)
did you turn the key on? Hit the on button on the controller? Sorry for the stupid questions but if it's not that and your connections are good all I can think of is a defective unit. Try going directly from the fuse box terminal in the engine bay and a ground on the frame (strut tower bolts would do) to make sure it's not just your wiring.
#5
Member
Thread Starter
Join Date: 05-28-09
Location: Fayetteville, NC
Posts: 256
Likes: 0
Received 0 Likes
on
0 Posts
I figured it out...but now I need to secure my ground and that bolt under the fuse box inside won't loosen so I can tighten it down on my ground wire. Any ideas on that one?
#8
Member
Thread Starter
Join Date: 05-28-09
Location: Fayetteville, NC
Posts: 256
Likes: 0
Received 0 Likes
on
0 Posts
I will go buy a terminal wire crimp and find a wrench to get it loose. That is the best place I can find to ground the kit.
I will post the pics and a how to once I get it together lol...just have to get the ground secure then we are set.
I will post the pics and a how to once I get it together lol...just have to get the ground secure then we are set.
Last edited by jthomas9; 02-23-2012 at 05:59 PM. Reason: Automerged Doublepost
#10
New Member
Join Date: 09-05-11
Location: Niagara Falls/NJ
Posts: 156
Likes: 0
Received 0 Likes
on
0 Posts
yeah the fitment for the controller is awful because of the 4 wires sticking out from it right at the box....i put my ground underneath the center console beside the computer under the e-brake...lots of the bolts are painted and that was the best spot i found where the bolts werent painted
#11
AWD > FWD
iTrader: (2)
Way back when I had it in my old LT, I mounted my controller under the dash under the steering wheel. If you look under the dash near the center console, there's a small plastic lip that sticks out. Mine was superglued to that. Once I got enough glue on it and got it set, it never moved, and was real easy to reach.
#25
Member
Thread Starter
Join Date: 05-28-09
Location: Fayetteville, NC
Posts: 256
Likes: 0
Received 0 Likes
on
0 Posts