Post your all your mods here including your future mods
#1
New Member
Thread Starter
Join Date: 09-25-07
Location: Canada
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
Post your all your mods here including your future mods
I just want to see what everyone is up to with their Cobalts.
I'll start off with mine.
dynamated all of trunk
fiberglassed trunk
2 JL W6v2
1 JL 1000/1v2
2 5 1/4 C5-650 front speakers
JL tweeters
crossover
2 JL 6x9's TR690-TXi rear speakers
Headunits
Alpine iDA-X001 thats for audio
Alpine IVAD310 thats for video
2 alpine 5" screens in the back of each headrest.
I'll start off with mine.
dynamated all of trunk
fiberglassed trunk
2 JL W6v2
1 JL 1000/1v2
2 5 1/4 C5-650 front speakers
JL tweeters
crossover
2 JL 6x9's TR690-TXi rear speakers
Headunits
Alpine iDA-X001 thats for audio
Alpine IVAD310 thats for video
2 alpine 5" screens in the back of each headrest.
#2
Senior Member
iTrader: (5)
so far i have nothing installed seeing as i always have something in then change it to upgrade.... so this is what im doing to my balt and unless otherwise noted i have all the equiptment and its not installed
Head unit: Ravdvd1 (looking for a replacement but its been hell finding one that fits my wants)
Center channel: (last to be done) 4" fnq with fnq tweeter.
Front Speakers: 2 FNX tweets in the apillar (installed), Custom fiberglass pods for 4 FNQ 6.5 mids, 2 FNX tweeters, and 2 HX2 8" subs for midbass.
Rear Speakers: Fiberglass pods for 4 FNX tweeters, 4 FNQ 6.5 mids
Subs: 2 RE 05 XXX 15's forward firing sealed air tight with 6" ports thru the rear deck (fiberglassed and vinyled almost done)
Amps: 801s for midbass, 801x for midrange, 301m for center, 2 150a2 for tweeters and T30001bd for subs
Extra goodies: 2nd alt (Externally regulated voltage), 2 16v batteries (still need), AGM carquest 12v battery, 2 3sixty.2 processors, alpine T-bt screen for center consol, hushmat... second skin damplifier pro, lux liner, and overkill for sound dampening, c pillars vinyled
Head unit: Ravdvd1 (looking for a replacement but its been hell finding one that fits my wants)
Center channel: (last to be done) 4" fnq with fnq tweeter.
Front Speakers: 2 FNX tweets in the apillar (installed), Custom fiberglass pods for 4 FNQ 6.5 mids, 2 FNX tweeters, and 2 HX2 8" subs for midbass.
Rear Speakers: Fiberglass pods for 4 FNX tweeters, 4 FNQ 6.5 mids
Subs: 2 RE 05 XXX 15's forward firing sealed air tight with 6" ports thru the rear deck (fiberglassed and vinyled almost done)
Amps: 801s for midbass, 801x for midrange, 301m for center, 2 150a2 for tweeters and T30001bd for subs
Extra goodies: 2nd alt (Externally regulated voltage), 2 16v batteries (still need), AGM carquest 12v battery, 2 3sixty.2 processors, alpine T-bt screen for center consol, hushmat... second skin damplifier pro, lux liner, and overkill for sound dampening, c pillars vinyled
#6
Senior Member
Join Date: 03-31-07
Location: Milwaukee, WI
Posts: 1,294
Likes: 0
Received 0 Likes
on
0 Posts
in my sig....
future i will have zzp shorty header coated, dss stage 2 axles, cab, cooling mods, and probably start digging into the motor once i decided on what i wanna do
future i will have zzp shorty header coated, dss stage 2 axles, cab, cooling mods, and probably start digging into the motor once i decided on what i wanna do
#7
Senior Member
Join Date: 09-26-07
Location: VA Beach
Posts: 822
Likes: 0
Received 0 Likes
on
0 Posts
i think he's talking about car electronics dude lol
emperor post pics of your system later it sounds nice, and dc2loco can i see your headrest install? I'm thinking about doing it myself but not sure yet......did you DIY or bring that stuff in for install @ a car audio shop?
emperor post pics of your system later it sounds nice, and dc2loco can i see your headrest install? I'm thinking about doing it myself but not sure yet......did you DIY or bring that stuff in for install @ a car audio shop?
Last edited by c4w18; 10-11-2007 at 09:33 AM. Reason: Automerged Doublepost
#8
H/U: Undecided between AVIC D3 and AVN5510.
Sub: Diamond D912D2 in sealed enclosure
Amps: Diamond D3100.1 and D3500.4
Mids and Highs: Diamond M561's and D3 6x9's in rear deck.
Gonna go with 2 yellow tops also.
My install is going to go like this. I want to have dark grey crapeted MDF on the walls to have flat walls rather than walls contoured from production of the balt. My amps and crossovers will be mounted on the walls, also thinking of putting some D6 components(same as the M5's just newer) mounted in for sound should I be playing the stereo with the trunk open. But that is just an idea at this point. Depending on how pleased I am with one D912 I may run another and an addition D31000.1, so that's what I've got in store...
Sub: Diamond D912D2 in sealed enclosure
Amps: Diamond D3100.1 and D3500.4
Mids and Highs: Diamond M561's and D3 6x9's in rear deck.
Gonna go with 2 yellow tops also.
My install is going to go like this. I want to have dark grey crapeted MDF on the walls to have flat walls rather than walls contoured from production of the balt. My amps and crossovers will be mounted on the walls, also thinking of putting some D6 components(same as the M5's just newer) mounted in for sound should I be playing the stereo with the trunk open. But that is just an idea at this point. Depending on how pleased I am with one D912 I may run another and an addition D31000.1, so that's what I've got in store...
#10
#14
#19
I would suggest an EDnine.1 at 2ohms
http://www.edesignaudio.com/edv2/product_info.php?cPath=1_22&products_id=44
#20
Senior Member
haha for the lazy people here you go heres my list and agree with saunders1986 too much to put in the sig
Mods-
Fujita F5 CAI
Corsa Sport Catback
Debadged
Painted Front Bowtie Black
SS Black Inlays on doors
K&N Drycharger
Ingalls Stiffy ETD
Backseat headrests removed
Backseat middle seatbelt removed
JL Audio 500 Watt Amp
JL Audio 10 Inch W7
Panasonic 6.5" Touch Screen DVD Radio Deck
DC Sport Sturt Bar
Red Cobaltss.net Decals
10000K HID's
JDM Yellow Fogs
Kumho SPT 225,45Z,R18
Custom Eyelids
ZZP 3.1" pulley
ZZP DP with Cat
Interceptor Scan Gauge
C/A Steering Wheel Gauge Pod
Water Wetter (25 Cap Fulls in Coolant)
Headlight Tints
Mods To Install
ZZP 2.8" Pulley
NGK Colder Plugs
Injector Harness
Stage 2 Belt
60# Injectors
C/A Dual Pass Intercooler
Dual Pass Option B Package
BCP Tune
Mods to Order
Tints
Cobra H/E
Eibach Sportlines Kit
Lambo Doors
2.6 pulley(Ordered)
Forged Pistons
NOS Intercooler Spray
B&M STS
Fidanza Flywheel
Spec Stage 2+ clutch
Drive Shaft Shop Level 2 Axels
Methanol Injection
Prothane Trans Mount Brushings
ARP Headstuds
Hawk HPS Brake Pads
Brembo Rotors
Upgraded Headgasket
Recommended Companies
Cobalt-Addiction, ZZPerformance, CrateEngineDepot, TurboTechRacing
Mods-
Fujita F5 CAI
Corsa Sport Catback
Debadged
Painted Front Bowtie Black
SS Black Inlays on doors
K&N Drycharger
Ingalls Stiffy ETD
Backseat headrests removed
Backseat middle seatbelt removed
JL Audio 500 Watt Amp
JL Audio 10 Inch W7
Panasonic 6.5" Touch Screen DVD Radio Deck
DC Sport Sturt Bar
Red Cobaltss.net Decals
10000K HID's
JDM Yellow Fogs
Kumho SPT 225,45Z,R18
Custom Eyelids
ZZP 3.1" pulley
ZZP DP with Cat
Interceptor Scan Gauge
C/A Steering Wheel Gauge Pod
Water Wetter (25 Cap Fulls in Coolant)
Headlight Tints
Mods To Install
ZZP 2.8" Pulley
NGK Colder Plugs
Injector Harness
Stage 2 Belt
60# Injectors
C/A Dual Pass Intercooler
Dual Pass Option B Package
BCP Tune
Mods to Order
Tints
Cobra H/E
Eibach Sportlines Kit
Lambo Doors
2.6 pulley(Ordered)
Forged Pistons
NOS Intercooler Spray
B&M STS
Fidanza Flywheel
Spec Stage 2+ clutch
Drive Shaft Shop Level 2 Axels
Methanol Injection
Prothane Trans Mount Brushings
ARP Headstuds
Hawk HPS Brake Pads
Brembo Rotors
Upgraded Headgasket
Recommended Companies
Cobalt-Addiction, ZZPerformance, CrateEngineDepot, TurboTechRacing
#21
Senior Member
Join Date: 09-05-07
Location: Sasebo Japan
Posts: 10,662
Likes: 0
Received 0 Likes
on
0 Posts
They should sound pretty good off of a 1000/1. I would save money on the amp and get an Elemental Designs amp though.
I would suggest an EDnine.1 at 2ohms
http://www.edesignaudio.com/edv2/product_info.php?cPath=1_22&products_id=44
I would suggest an EDnine.1 at 2ohms
http://www.edesignaudio.com/edv2/product_info.php?cPath=1_22&products_id=44
and a clarion max657vd double din
Last edited by Raven SS; 10-11-2007 at 01:38 PM. Reason: Automerged Doublepost