Relocated Traction Control Button!
#1
Senior Member
Thread Starter
Relocated Traction Control Button!
So, I have been thinking ever since I got the car how horrible the location of the TC button is, its very inconvenient. So I relocated it.... Here's some pics..... Now I just need to figure out I am going to recces the button into the plastic...
But here yah go....
I was gonna do a How To, but its such a simple thing to do.
where it used to be(for those without TC)
But here yah go....
I was gonna do a How To, but its such a simple thing to do.
where it used to be(for those without TC)
Last edited by JsavageSS/TC; 05-16-2009 at 06:10 PM.
#5
Senior Member
Join Date: 03-23-07
Location: Michigan
Posts: 14,118
Likes: 0
Received 0 Likes
on
0 Posts
#10
Senior Member
Thread Starter
#17
Senior Member
Thread Starter
#18
Banned
Join Date: 02-25-08
Location: Houston/CincoRanch
Posts: 690
Likes: 0
Received 0 Likes
on
0 Posts
try turtle wax polishing compound for the trim, otherwise wet sand it with 2000grit and clear it nice and heavy.
also I noticed you don't have that horrible tan 2 tone like all the other balts, did chevy finally change it to black? or did you paint it?
also I noticed you don't have that horrible tan 2 tone like all the other balts, did chevy finally change it to black? or did you paint it?
#19
Senior Member
I like the idea. But I'd think maybe next to the cig lighter under the HVAC might have been better but thats just me.
The SS and GT's have all black interior. Only two-tone is the door panel inserts and seats but thats on the SS' only.
The SS and GT's have all black interior. Only two-tone is the door panel inserts and seats but thats on the SS' only.
Last edited by 08G5GT2.4L; 05-17-2009 at 12:11 AM. Reason: Automerged Doublepost
#20
Senior Member
Thread Starter
#21
Banned
Join Date: 02-25-08
Location: Houston/CincoRanch
Posts: 690
Likes: 0
Received 0 Likes
on
0 Posts
not just the Gt's i own the base G5 and its all black, my base balt was tan thou
#24
i think imo that where he put it is gonne be the easiest and most convient with out doing some major changes. looks good but still gotta get rid of that switch for the meth
#25
Senior Member
Thread Starter
I could relocate it and add something in its place though. Can't go any smaller in size for the switch and its needs the saftey cover for it.
Any suggestions people?