$800 what mods?
#1
Banned
Thread Starter
Join Date: 11-19-06
Location: Orange County CA
Posts: 1,411
Likes: 0
Received 0 Likes
on
0 Posts
$800 what mods?
YO everyone
So i have roughly $800 to spend in mods
i currently have injen intake and poly trans mounts
my cat has a small hole in the bottom and im thinking of getting megan exhaust
any other opinions??
05 s/c
So i have roughly $800 to spend in mods
i currently have injen intake and poly trans mounts
my cat has a small hole in the bottom and im thinking of getting megan exhaust
any other opinions??
05 s/c
#4
Senior Member
Join Date: 09-25-06
Location: USAG Stuttgart, GER
Posts: 1,860
Likes: 0
Received 0 Likes
on
0 Posts
Stage 2 will give you the best increase for the money. Or go stage 1(have it installed by dealer) and buy a 2.9" pulley/hub, belt and install it yourself. That will be cheaper with a little more gain.
#5
Banned
Thread Starter
Join Date: 11-19-06
Location: Orange County CA
Posts: 1,411
Likes: 0
Received 0 Likes
on
0 Posts
a full exhaust sounds like a good idea though...
and thanks for all of your replys
#6
Original Hayden Fanatic
Platinum Member
If you are thinking about stage kits, just buy a 2.9/hub/injectors and belt yourself, then have someone tune you. Stage kits are a waste or money unless you plan on keeping the warranty and not modding beyond GMPP parts
#7
Senior Member
Join Date: 09-25-06
Location: USAG Stuttgart, GER
Posts: 1,860
Likes: 0
Received 0 Likes
on
0 Posts
Or you can do that, but that requires you to get someone to tune you and you have a harder chance of keeping your waranty
Last edited by Sw4y1313; 04-23-2008 at 12:17 AM. Reason: Automerged Doublepost
#23
Senior Member
Join Date: 04-20-08
Location: englewood ohio (not california)
Posts: 830
Likes: 0
Received 0 Likes
on
0 Posts
man just go ***** to the wall and get 60# injectors from lightening performance
and a 2.7/2.6 pulley stage 2 belt and a tune
you could do that pretty cheap
you might want some cooling mods though too like a heat exchanger
and a 2.7/2.6 pulley stage 2 belt and a tune
you could do that pretty cheap
you might want some cooling mods though too like a heat exchanger
#24
Senior Member
Join Date: 10-03-06
Location: New Tripoli, Pennsylvania
Posts: 6,793
Likes: 0
Received 0 Likes
on
0 Posts
#25
Original Hayden Fanatic
Platinum Member
I retract my previous statement; as retarded as it sounds, it appears the tunes are the same. WTF, that makes no sense to me why they would do that but whatever...