Catch can vs Breather filter
04-15-2011, 12:03 AM
#51
Senior Member
This pic is from when build was half done but you get idea. Its gotta window to see how full, and little allen key bolt at bottom to empty. Mines black anodized not plastic.\
Heres one as it is now
Heres one as it is now
04-28-2011, 10:46 AM
#56
New Member
Join Date: 11-06-09
Location: ON, Canada
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
You have to plug the hole on your intake piping, you cant add the breather right there, that would let un-metered air into the engine.
Plug that hole, slap the breather onto the back of the valve cover and call it a day. I've had mine like that for a year now and no codes...
Plug that hole, slap the breather onto the back of the valve cover and call it a day. I've had mine like that for a year now and no codes...
06-05-2011, 11:18 AM
#61
Senior Member
i want to know the same b/c i like the clear design so you don't have to actually uninstall it everytime you wanna check it
06-05-2011, 11:42 AM
#62
for those running breathers... just wait till you make over 20psi and rev to 8000+ rpms. youll spray oil all over everything. catchcan is the way to go, its more expensive and it looks like ass IMO but in this case its function over form. i want whats gonna perform not whats gonna look better.
06-05-2011, 12:26 PM
#64
I bought a bag of (5) anodized black -10an fittings for $30 and (2) stainless lines, both which are 2 1/2 feet long, for $25. Lastly a Moroso breather tank for $70. My setup looks exactly like yours.. Same amount of AN fittings, and stainless lines, oil cap tapped, etc. Everything was bought brand new.
That's a total of $125, if you can't add.
Go lie somewhere else. You're impressing no one. You're an idiot if you actually think you convinced anyone that it was even remotely close to $500..
06-05-2011, 12:31 PM
#65
Senior Member
Powdercoating what..?
I bought a bag of (5) anodized black -10an fittings for $30 and (2) stainless lines, both which are 2 1/2 feet long, for $25. Lastly a Moroso breather tank for $70. My setup looks exactly like yours.. Same amount of AN fittings, and stainless lines, oil cap tapped, etc. Everything was bought brand new.
That's a total of $125, if you can't add.
Go lie somewhere else. You're impressing no one. You're an idiot if you actually think you convinced anyone that it was even remotely close to $500..
I bought a bag of (5) anodized black -10an fittings for $30 and (2) stainless lines, both which are 2 1/2 feet long, for $25. Lastly a Moroso breather tank for $70. My setup looks exactly like yours.. Same amount of AN fittings, and stainless lines, oil cap tapped, etc. Everything was bought brand new.
That's a total of $125, if you can't add.
Go lie somewhere else. You're impressing no one. You're an idiot if you actually think you convinced anyone that it was even remotely close to $500..
06-05-2011, 12:43 PM
#67
Senior Member
Your right it is an opinion, but I don't think there's many people that think his set-up isn't nice. Personally I prefer the l61, as you saw last summer. Gave both of you lsj's run for your money lol.
06-05-2011, 01:51 PM
#69
Don't make it seem like it's some extravagant setup that costs a fortune. It's a cheap setup. That's all I'm saying. I'm not dictating his money, by any means. More power to him if he spent $500. Just don't try to bullshit a bullshitter.
I have the EXACT same setup and I paid $125.
06-05-2011, 03:15 PM
#70
i can't weld so my valve cover had to be modified for me.
i bet you didn't know that when you powdercoat an LSJ valve cover, it melts plastic baffles inside and doesn't let it vent properly.
-10 male fitting for the back of the valve cover = $10.00
having the valve cover modified to take all the plastic baffling off and weld the fitting = $60.00
(3) 90* swivel -10AN fittings = $55.00
(1) 90* 1/2npt to -10AN = $35.00
(7) feet of -10AN stainless line = $55.00
(1) Jegs breather tank = $85.00
Powdercoated custom color = $150.00
HOLY **** $450.00 plus all the random shipping.
06-05-2011, 03:16 PM
#71
That's not being a dick, that's called - "calling someone out".
Don't make it seem like it's some extravagant setup that costs a fortune. It's a cheap setup. That's all I'm saying. I'm not dictating his money, by any means. More power to him if he spent $500. Just don't try to bullshit a bullshitter. I have the EXACT same setup and I paid $125.
Don't make it seem like it's some extravagant setup that costs a fortune. It's a cheap setup. That's all I'm saying. I'm not dictating his money, by any means. More power to him if he spent $500. Just don't try to bullshit a bullshitter.
I have the EXACT same setup and I paid $125.
Thread
Thread Starter
Forum
Replies
Last Post