MRZ - RedGTZ

Thanks for all the inputs on the parts you guys need

Updated list... we'll have to get to work

- Stainless Steel engine bay dress up parts (fuse box cover, injector rail cover, spark plug cover)
- Stainless Steel Door Sills set for the 4 doors Sedan models
- Billet Front Strut Brace in brushed finish (less shine, lower cost, same high quality work)
- Billet Shift Knob (that fit perfectly on OEM shifter)
- Billet E-brake Handle
- Billet Gas Door (Something that will fit perfectly with no metal to trim/cut on the car)
- Billet Bowtie emblem (maybe custom emblems also?)
- Billet HVAC knobs (light comes thru small acrylic rod, see picture)

Pedals would be nice but we never get into that market due to several factors, depending on the demand for them, we can take a closer look at it

For those looking on parts made out of CF we are not speciazed in that kind of work, we can add CF to add a nice touch to our existing products but we are not aiming that market right now. Same thing for the headlights, tail lights and similars big plastic items.

Here is what the HVAC knobs looks like, same design as the custom billet engine bay covers These are on a J-body

PpAzZ1101

Throttle body.

jeremie

custom engraving maybe? on say the bowties or on the shift knobs. there was a guy on a mustang forum i went to who made me a billet knob for my mustang and i had him do some engraving on it as well, a pony that was on fire. would custom designs like this be something you could do?

thats all i can really think of besides all the engine dress up stuff thats been named

just about forgot to mention, the bowtie should be flush with the grill instead of sticking up like the oem ones.

1BadBlueSS

mesh grille insert!

farfrmnormal

All great items - anything for our cars is a nice added touch.

Cobalt_SSTuner

iTrader: (1)

mesh grill insert!!!

JapEatr

iTrader: (9)

no brackets for the dual pass resivior...the car you sponser has them installed(billbt)
i want some billit everything...DONT LET MY TEAM DOWN

BlueThunder2006

Throttle body.

Scythe_Snake

-Throttle bodies!!!!!!!!!!!!!!!!1

-Fuel Rail Cover

-Valve Cover Insert

-Valve Covers

-Struts

-Pedals

all for the SS/SC

jester

throttle body

alleycat58

Please, please, PLEASE...that would be awesome. The stock pedal placement SUCKS MAJORLY.

I'll 500th that and also put a nod in for an e-brake handle replacement.

djt81185

70mm throttle body

marerick007

I would DEFINATELY be interested in some custom pedals! If you could make them customizable like with a choice of a bowtie or SS on them....that would rock! The GM one's just dont' cut the mustard for me. When it comes time for more appearance mods, I will be sending tons of cash your way! I love your strut bar and billet fluid caps!

bravehart929

a comfortable cheap armrest.........yes i know gm sells them

g5mike

when I finally have a TB,I'll be content..love the throttlebody

Zivnuska

Yep!

MRZ - RedGTZ

Thanks again for your suggestions!

Updated list...

- Stainless Steel engine bay dress up parts (fuse box cover, injector rail cover, spark plug cover)
- Stainless Steel Door Sills set for the 4 doors Sedan models
- Billet Front Strut Brace in brushed finish (less shine, lower cost, same high quality work)
- Billet Shift Knob (that fit perfectly on OEM shifter)
- Billet E-brake Handle
- Billet Gas Door (Something that will fit perfectly with no metal to trim/cut on the car)
- Billet Bowtie emblem (maybe custom emblems also?)
- Billet HVAC knobs (light comes thru small acrylic rod, see picture)
- Throttle Body for Ecotec's (all fly by wire model - major bore increase)

We did not make these for him but we can check what we ca do about it if there is more interest

xravenwingsx

i couldn't agree more, that, the turning radius, and the body roll are my main complaints about my car--my parking brake constantly needs adjusting and doesn't always hold the car still with the trans in neutral. not to mention, the clips break so easily, the handle always falls off. i could use something in black anodized aluminum or stainless steel w/carbon fiber. same with the engine bay. i have an injector cover and spark plug cover made by a now-defunct company called showmestreetcustoms...they sent the wrong colors. it says 'cobalt ss' but it's silver brushed aluminum or stainless steel, with blue insert for the text. i ordered black metal with red writing. :P anyways, good to see there's a new company helping out with dressup components. keep up the good work MRZ!

Witt

I'd definetly be up for the bored throttle body. Thanks for adding that to the list.

Mines_Better

i dont see the problem with the pedals, i can heel toe shift just fine. or maybe my feet are just bigger...

CTCOBALTSSS

Yes. At least for the top grille. A matching lower grille as well would be awsome though.

Halfcent

I would like two things.

First, some coupe door sills that don't say SS on them, because mine isn't an SS.

Second, a better looking ECM/TCM mount under the hood.

BobWreck

Maybe you could miracle an independent rear suspension up in there. I'm embarrassed to look at what's up there now.

Bob

blktrax

I can forgo the CF stuff I mentioned earlier.

These are the do wants.

Either Satin Alu or Black/Gunmetal

Billet Gas door.

Front and Rear Emblems

E-Brake Handle (again Set screw held not cliped like the OEM)

Shifter Knob + ((would like to see a shifter kit) or replacement parts for the sloppy plastic pin and rocker in the shifter plate that gives it such a crummy shift feel. (1 Roll pin + 1 L arm))

MRZ - RedGTZ

We offer the COBALT door sills already that don't say SS, we have a group buy on them running right now if you want to get them at discounted price. You can choose between COBALT or COBALT SS model

click this link: https://www.cobaltss.net/forums/mrz-performance-139/group-buy-stainless-steel-door-sills-mrz-performance-45191/