What Have You Done To Your Cobalt Today?
Senior Member
iTrader: (1)
Originally Posted by Kobraa
Well that end plate was messing with it up, actually sits flush now. But now it will idle for 30 seconds or so but then starts surging like crazy. Fuel trims go way positive. My tuner is coming by tomorrow to see what he can figure out. It will even sit there and surge at 2600 rpm. I reset fuel trims with my tech 2 to see if it made a difference and now its just starts and stalls instantly. What a wild adventure this is turning into. Ah well. We'll get it.
Senior Member
iTrader: (1)
Just found out zzp sells gm's upgraded axle separately I tried emailing CED if I could just buy the axles and not the kit but they said you can only by the kit. Very nice to see this
Well that end plate was messing with it up, actually sits flush now. But now it will idle for 30 seconds or so but then starts surging like crazy. Fuel trims go way positive. My tuner is coming by tomorrow to see what he can figure out. It will even sit there and surge at 2600 rpm. I reset fuel trims with my tech 2 to see if it made a difference and now its just starts and stalls instantly. What a wild adventure this is turning into. Ah well. We'll get it.
Senior Member
iTrader: (1)
Nope. Starts and runs great if you let it sit for a while then all at once as the idle starts to come down fuel trims go way positive and it starts surging. My guy was looking through my tune files and thinks he found the problem. Something about an injector delay time table being all 0's. He seems pretty confident he can fix it. He'll be here this afternoon. Also i still have some air in my clutch line because i have to pump it to get it to go in gear. We're almost there
Just installed the new TTR rotated trans mounts. These thing are sweet, wheel hop is non existent, down shifts feel super smooth. Wasnt expecting so much vibration though. Hopefully they settle down a little bit.
Only thing is they aren't actually rotated mounts like Powell's/OTTP's.
Vibration is due to the poly insert they use. Also, did u loosen/re torque the 3 bolts on your engine mount to let everything settle?
Senior Member
iTrader: (1)
Well my guy got her running like a champ!!! No more idle problems, Something to do with injector offset? i dont know the lingo. He showed me a table that was completely 0's. Gotta bleed some more air out of the clutch and were good to go!
The following users liked this post:
EmperorJJ1 (04-04-2016)
Senior Member
iTrader: (4)
Yeah but they gave me a quote of $370/month on a $29k loan If I wanted the easycare warranty bs. I can already afford that. That sky redline is $11k. So now I'm like ffffuuuuuuuuuuu I want it!
Senior Member
iTrader: (4)