NVMYCOBALTSS

The closest place would be automotion. Chris and Mike as well as a few others have been dyno tuned there.

putting the pulley on is butter. the sc comes off in 15 minutes tops. the injectors are little more tricky, but still a 30-45 minute job. Just plan for 2-3 hours total for oh ***** then if charles is available to throw a stock s2 tune on until you get to the dyno it will be fine.

I have to work for the next few weekends, so when you get the hub, post up in here. if you get all of the stuff together sooner, you can use the pulley puller to get the stock pulley off.

'07SCSS

Where is automotion? I used to live in louisville but I moved back to etown so im not sure of where things are at up there. I know some things bc I have family still up there. Where is the best place u think to look to get a stg2 hub for cheap??

bwalker0510

hey where do you work at in etown. i think i see your car outside of lowes all the time.

chood711

iTrader: (4)

i am down to help you out...i havent put on the hub yet but i have seen the injectors done before, i think i can manage them.. automotion is on broadway.

i dont know where you can just buy the hub itself. your best bet would to go to the parts classifieds on here and make the thread WTB: Stage 2 Hub.

here is a link to a few pics of the car with the rims on it. https://www.cobaltss.net/forums/show...=1#post2898514

i have a problem guys.......i know why my ait2 temps are staying high......i have a hole somewhere....barely had any dexcool left.

quicksilver41

Charles (502) 589-1155
Automotion Inc.
636 East Broadway
Louisville, KY 40202

Tell him Mike sent you to him and he will take care of you. If you want to see his work. Hit me up with a PM. I will be down that way this weekend and you can check out the car.

You are better of doing a ZZP pulley, injectors and harness, Stage 2 belt, and custom tune. You will make more power for less money. Looking at maybe $800+ and 30-60 extra HP.

Like it has been sad before. If you want to keep your warranty you need to go with the Stage 2. You will have to have them put it on to keep it and then take it to get a custom tune. The kit you buy will not match your Vin so they can not reflash it. Brian had to do the same this. $1000+ for 15-20 extra HP. Not worth it in my eyes.

I have seen your car outside Lowe's in E-town. Is your name Tyler? I will also be willing to help when you are ready to install your stuff.

Chris: Sean had the same problem. It is not that bad on his, but you are going to have to take them hoses off and replace them. An did you bypass your stock H/E yet?

NVMYCOBALTSS

chris, have you seen any clear greasy spots in your driveway or where you park at work? there shouldn't be any leaks anywhere unless one of the hoses vibed loose a bit. Maybe it didn't get burped all of the way.

bwalker0510

if your interested in going the injectors, harness, and need a stg2 pulley hub, stg2 belt. let me know i will give you a really good deal on all of it. i still have a brand new xtc intake for 150 and used gmpp sport exhaust for 300 im also selling.

chood711

iTrader: (4)

I had dexcool all over the bottom of the cx racing he and in misc spots around it. alls i know is it was low so i routed everything back through the stocker until i get time to check it out.

chood711

iTrader: (4)

as of right now i have bypassed the cx racing and went back to just stock. ill look at it..how hard is the dual bypass to install?

quicksilver41

It is not that hard from what I am told. I want to do that, but am undecided on turbo or stay SC.

You may just need to add coolant to. I did not think about that till Brian said something. We let our cars run for a bit and then added more. Over a week we checked it and added when needed till it was where it needed to be.

chood711

iTrader: (4)

i know that....what would explain the dexcool all over the place on and near the cx racing.

'07SCSS

Yeah that's me. I work at Lowe's and have the blue balt. I dont want to spend a lot of money but want to get some good horsepower.

Yeah I work at Lowe's, I work overnight and on the weekends sometimes.

What kind of deal can u give me and what all would I get??

quicksilver41

MEET Sept 27Th

Let get this going. We have not had one in a very long time and we are over due for one. So this Sat 27Th at 12pm at Rooster's on Preston HWY. If you did not get a text message from me this is your notice. If you don't know how to get there we can arrange a meet up to get you there. We can take picture after or whatever you want.

The guy that Tunes (Charles) will hopefully be there if you have any questions or need to take to him.

So get you cars ready! I hope that everyone can make it with such a short notice.

welchstang

Hey guys, Just wanted to stop in and say hey. I own a 2000 Mustang Gt, and a big fan of the cobalt ss. i had a run in with a couple saturday going to work, a yellow one from indiana, he got me good, but very good run. So anyway, I just wanted to say whats up. I used to work in Etown also.

NVMYCOBALTSS

no text to me? I am hurt... Needs more pre meet at the track. I fixed the roll pin this weekend, it came out in pieces....

bwalker0510

ill sell the stg2 pulley hub, stg2 injecotrs, stg2 belt, and brand new zzp 2.8 for 200. i also have a brand new ca cai for 150 and a used gmpp exhaust for 300. just let me know. i can bring the parts to you since i know where you work if you wanna look at them or something.

NVMYCOBALTSS

deal of the month there. I paid more than that for injectors and a belt only.

how about lunch then cruise in to the irquois car show?

'07SCSS

Yeah that would be great if you can. Just the stage 2 stuff, I have a cai already. When could you bring them up?

chood711

iTrader: (4)

i thought i had dibs on the 2.8

was it a pain in the ass to do..you going to do that meet this weekend?

quicksilver41

Meet?


Where at did you have this run in at?

NVMYCOBALTSS

it wasn't too bad, about an hour and a half to do it. The hardest part is getting the fuse box out, I had to take my intake off because of it being a single tube instead of a two piece. If it wasn't for that, you wouldn't have to take the wheel off.

welchstang

65N just before the outer loop, at the bend in hwy.

quicksilver41

That was not the one from Indiana. He never comes out this way. It was me or Scott. And if it was loud as hell it was me.

NVMYCOBALTSS

you don't remember? on another note, i read somewhere that your car was down, whats up with that?

quicksilver41

I have my from bumper at the body shop and and it at Sean's house cooling down to change the oil. It is ok.