Va. Beach/ Tidewater Thread Ver. 2.0
#1629
I need out of my loan, as I'm relocating back to Michigan here soon and do not want to the drive the SS in the winter. I hate to sell the damn thing, hence not putting a real effort into it. I may have one option that will let me keep it.
#1632
Last edited by Bad05SS; 06-29-2010 at 02:12 AM. Reason: Automerged Doublepost
#1636
i wish i coudl be there.. all the fun meets im missin this summer but ill go to a couple while im home.. im elaving tomorrow guys!1 im so excited to head back to my hometown and surprise my gram at a dinner my mom and i planned.. its going ot be a great day.. im soo ready for this
#1639
Joe I saw u da other nite @ Wal-Mart on Mercury Blvd. I was home getN sum info frm my car for the insurance company & putting some of my stock **** back on da car b4 da adjuster comes out.
I kno most of you probably don't care because I don't know me & I don't drive a cobalt anymore but I got sum updates on my build.
I have received most of my parts for the bottom end. For those who do care & don't kno I have a 2002 Cavalier LS Sport Coupe which is the first year that an Ecotec made it into the Cavalier. At that time the motor was only offered with the LS Sport trim levels. So it was a pretty gud startN point for a project for cheap.
My existing mods are:
Eibach Sportline lowering springs
DC Sport 4-1 header
AEM cold air intake system (damn this mod)
B&M short throw shifter
Borla 2 1/4" catback exhaust
I am now buildN the car for boost & I ordered a gang of parts most of which are in.
Parts that have *** N:
Eagle H-beam connecting rods
Darton 90mm max bore sleeves
Clevite 77 rod bearings
Clevite main bearings
Bare GM L61 stock block
spare Getrag F23 manual Transaxle
AEM UEGO a/f ratio gauge
AEM Tru Boost gauge type boost controller
Glow Shift A-pillar triple gauge pod
spare valve cover for paint/powdercoatN
ARP head studs
SSBC rear disc brake conversion kit
parts that have not *** N:
Wiseco forged pistons
TTR upper & lower urethane motor mounts
Hahn Racecraft log turbo manifold
Hahn Racecraft "Sreetheat" intake manifold w/port fueler option
I'm kinda torn between ordering the Eagle forged crank or using a stock 1. Eagle will cost me a couple more weeks more than likely...decisions, decisions. I also totally neglected the transaxle well besides buyN another 1.
So I still need a clutch & flywheel, I would prefer a LSD, maybe a crank & maybe sum stronger axles.
So tell me wat ya'll think. Any useful input is appreciated.
I kno most of you probably don't care because I don't know me & I don't drive a cobalt anymore but I got sum updates on my build.
I have received most of my parts for the bottom end. For those who do care & don't kno I have a 2002 Cavalier LS Sport Coupe which is the first year that an Ecotec made it into the Cavalier. At that time the motor was only offered with the LS Sport trim levels. So it was a pretty gud startN point for a project for cheap.
My existing mods are:
Eibach Sportline lowering springs
DC Sport 4-1 header
AEM cold air intake system (damn this mod)
B&M short throw shifter
Borla 2 1/4" catback exhaust
I am now buildN the car for boost & I ordered a gang of parts most of which are in.
Parts that have *** N:
Eagle H-beam connecting rods
Darton 90mm max bore sleeves
Clevite 77 rod bearings
Clevite main bearings
Bare GM L61 stock block
spare Getrag F23 manual Transaxle
AEM UEGO a/f ratio gauge
AEM Tru Boost gauge type boost controller
Glow Shift A-pillar triple gauge pod
spare valve cover for paint/powdercoatN
ARP head studs
SSBC rear disc brake conversion kit
parts that have not *** N:
Wiseco forged pistons
TTR upper & lower urethane motor mounts
Hahn Racecraft log turbo manifold
Hahn Racecraft "Sreetheat" intake manifold w/port fueler option
I'm kinda torn between ordering the Eagle forged crank or using a stock 1. Eagle will cost me a couple more weeks more than likely...decisions, decisions. I also totally neglected the transaxle well besides buyN another 1.
So I still need a clutch & flywheel, I would prefer a LSD, maybe a crank & maybe sum stronger axles.
So tell me wat ya'll think. Any useful input is appreciated.
#1640
I rarely go up there, so must of caught me @ the right time! Should've said what's up, lord knows I've built a many Cavalier's so no hate from me.
BTW, tell a friend-
http://norfolk.craigslist.org/cto/1817072856.html
BTW, tell a friend-
http://norfolk.craigslist.org/cto/1817072856.html
#1644
#1648
Danew, Shoulda had some kind of Joe#1 replica sittin' on your engine! Hell I deserve that much respect! Nice pics!! Your car NEVER looked that good when it was parked at my house.
Stikman29, you KNOW you need a good tune.... Contact me!
Schulte... If your ass moves, you are lookin' at gettin' kidnapped by us locals and brought back here as a hostage!!
Stikman29, you KNOW you need a good tune.... Contact me!
Schulte... If your ass moves, you are lookin' at gettin' kidnapped by us locals and brought back here as a hostage!!
#1650
I am heading to VA beach maybe tmrw on my 1 day off. I am from Pittsburgh but working in VA for the summer. I was wondering if anyone was around the area that wanted to chill or something.
call/text 724-448-8907
I get horrible internet so I figured I post my cell.
I am about 1hr 45 min from VA beach
thanks guys
call/text 724-448-8907
I get horrible internet so I figured I post my cell.
I am about 1hr 45 min from VA beach
thanks guys