Modern Performance Modern Performance is a Supporting Vendor
contacts: Modernceo

Cobalt Coilovers $999 have arrived! Pics!

Thread Tools
 
Search this Thread
 
Old 08-24-2007 | 01:47 PM
  #1  
Modernceo's Avatar
Thread Starter
Former Vendor
 
Joined: 04-06-05
Posts: 885
Likes: 0
From: Houston Texas
Cobalt Coilovers $999 have arrived! Pics!

Cobalt Coilovers $999 have arrived! Pics!

We have received the Cobalt prototype coilovers!

- 30 way adjustable for rebound/compression
- Height adjustable from -1 inch to -3 inches
- Pillow ball mounts for front and rear


Because of the front strut / rear shock design of the Cobalt, designing a coilover that would work with the Cobalt was a little more tricky than usual, but a design was thought out, and put into motion that looks great.

Here is a picture of the coilovers. Again notice, the front is a spring/strut coilover and the rear is a seperate shock/spring design just like the factory setup. All four struts are adjustable for softness/firmness.



We are going to test these out on our Cobalt, and after testing, we should have these available and in stock within about 3-5 weeks, possibly faster.

Pricing, like I mentioned earlier, will be an amazing $999.99 !

Warranty
- 1 year warranty, and BC has a head office IN THE USA
- Should any of the strut cartridges fail outside of warranty, cost to replace it is only $99, and replacements are kept in stock in the USA!

Last edited by Modernceo; 08-24-2007 at 02:11 PM.
Old 08-24-2007 | 01:52 PM
  #2  
cincybalt's Avatar
Senior Member
 
Joined: 05-11-07
Posts: 3,936
Likes: 0
From: Cincinnati
oh shiiitt.. subscribed for later
Old 08-24-2007 | 01:53 PM
  #3  
07SSCharged248's Avatar
Senior Member
 
Joined: 08-17-06
Posts: 3,795
Likes: 0
From: Rochester Hills, MI
if i only had the money....
Old 08-24-2007 | 02:05 PM
  #4  
g5mike's Avatar
Senior Member
 
Joined: 03-17-06
Posts: 17,268
Likes: 0
From: Moncton Newbrunswick Can.
Awsome these are only 3 bills more than the koni-strut setup
Old 08-24-2007 | 02:09 PM
  #5  
Omega_5's Avatar
Senior Member
 
Joined: 10-01-06
Posts: 5,134
Likes: 0
From: Maidstone, SK
They're hot!
For sure going on the future mod list!
Old 08-24-2007 | 02:12 PM
  #6  
Edubs's Avatar
Senior Member
 
Joined: 05-01-06
Posts: 4,976
Likes: 2
From: West Coast, FL
When will testing be complete so you can offer these to us?
Old 08-24-2007 | 02:13 PM
  #7  
blktrax's Avatar
Senior Member
 
Joined: 12-15-06
Posts: 618
Likes: 0
From: .
Would like to see corrosion testing results please.

Perhaps a side by side comparision to KW Virant 2's?

3 bills less than the KW's, you may have my business.
Old 08-25-2007 | 02:01 AM
  #8  
Modernceo's Avatar
Thread Starter
Former Vendor
 
Joined: 04-06-05
Posts: 885
Likes: 0
From: Houston Texas
Waking up in less than 7 hours to go to the shop to test fit these onto our Cobalt SS !

Ill be taking lots of photos to share with you guys !

Old 08-25-2007 | 02:03 AM
  #9  
KillerBee's Avatar
Senior Member
 
Joined: 03-23-07
Posts: 14,118
Likes: 0
From: Michigan
Nice and they are black
Old 08-25-2007 | 02:05 AM
  #10  
sick06cobalt's Avatar
Senior Member
 
Joined: 06-06-07
Posts: 9,714
Likes: 0
From: somewhere
OH MY GOSH!!! tHOSE ARE PHAT!!! NICE!!!
Old 08-25-2007 | 02:11 AM
  #11  
Moza13-'s Avatar
Senior Member
 
Joined: 12-18-06
Posts: 2,693
Likes: 1
From: Wisconsin
definately a must buy for me, im going to either need new struts or these, i vote these.
Old 08-25-2007 | 12:10 PM
  #12  
Modernceo's Avatar
Thread Starter
Former Vendor
 
Joined: 04-06-05
Posts: 885
Likes: 0
From: Houston Texas
Thank you all for your interest!

We have test fitted them onto our Cobalt this morning, and everything looks really good. The rears were suprisingly easy to install, and the fronts werent that bad either.

Some minor adjustments are going to be made, and Ill keep you guys updated on progress of these.

Stay tuned though, because if your factory struts are blown (suprisingly our factory rear struts were blown!!) or if youd like to lower your car, the correct way, these are going to be a VERY affordable COMPLETE option!
Old 08-25-2007 | 12:25 PM
  #13  
cincybalt's Avatar
Senior Member
 
Joined: 05-11-07
Posts: 3,936
Likes: 0
From: Cincinnati
pix!?!?!?!?!
Old 08-28-2007 | 03:40 PM
  #14  
cincybalt's Avatar
Senior Member
 
Joined: 05-11-07
Posts: 3,936
Likes: 0
From: Cincinnati
any new updates?
Old 08-28-2007 | 04:13 PM
  #15  
Modernceo's Avatar
Thread Starter
Former Vendor
 
Joined: 04-06-05
Posts: 885
Likes: 0
From: Houston Texas
Sorry guys, dont have any photos I can share right now.

After we make a few small adjustments, I will reinstall them, and take photos.

Stay tuned guys. Thanks!
Old 08-28-2007 | 04:13 PM
  #16  
Edubs's Avatar
Senior Member
 
Joined: 05-01-06
Posts: 4,976
Likes: 2
From: West Coast, FL
Can't wait to see the final product...
Old 08-28-2007 | 05:58 PM
  #17  
h0l0caust's Avatar
Senior Member
 
Joined: 09-12-06
Posts: 1,433
Likes: 0
From: Ottawa/Gatineau Canada
me too, please post pictures.
Old 08-28-2007 | 06:01 PM
  #18  
Ljavy17's Avatar
Senior Member
 
Joined: 06-01-05
Posts: 3,622
Likes: 0
From: Miami
really good ****.
Old 09-08-2007 | 08:06 PM
  #19  
g5mike's Avatar
Senior Member
 
Joined: 03-17-06
Posts: 17,268
Likes: 0
From: Moncton Newbrunswick Can.
Any updates????????????????????
Old 09-08-2007 | 08:17 PM
  #20  
pjk91's Avatar
Senior Member
 
Joined: 03-07-05
Posts: 1,733
Likes: 0
From: San Pedro/PV
so who makes these?
Old 09-08-2007 | 08:20 PM
  #21  
Scythe_Snake's Avatar
Senior Member
 
Joined: 07-24-06
Posts: 7,874
Likes: 21
From: Matteson, Illinois
Wow, more stuff. Good work, and thanks for the support.
Old 09-08-2007 | 08:46 PM
  #22  
R&C_rallySS's Avatar
Senior Member
 
Joined: 07-09-06
Posts: 7,451
Likes: 0
From: PA
Those are some real good looking coilovers. Its good to know your testing them and making changes. This means a company who cares about any small imperfections. I personally would like to see a longer warntity, something like 1 year full warnity that covers them for any reason at all and a 2 year warnity covering defects. This is something I will be looking into purchasing. Maybe a group buy for the first 10 sold with free shipping and 5% off or something. =) Its just wasier trusting a company like KW that had been around for so long. Lets see what happens.
Old 09-08-2007 | 10:14 PM
  #23  
nitehawk's Avatar
New Member
 
Joined: 07-09-07
Posts: 113
Likes: 0
From: Export, PA
You can trust the products made by BC, they've been around for a lil while as well.

a little background info, BC was the first company (that i know of) to make INVERTED coilovers for neons, and i've never heard a single bad thing about them. BC makes a quality product and Modern has been around for years now.

Trust what Cory says, he'll never steer anybody wrong
Old 09-08-2007 | 10:49 PM
  #24  
g5mike's Avatar
Senior Member
 
Joined: 03-17-06
Posts: 17,268
Likes: 0
From: Moncton Newbrunswick Can.
Cant wait to get these to take away the rough ride I have now,plus the fact of it allows you a 3inch drop.
Old 09-08-2007 | 10:54 PM
  #25  
rallyracer's Avatar
Senior Member
 
Joined: 11-09-04
Posts: 9,440
Likes: 0
From: Minnesota
Are the rears coilovers too cuz it doesnt apear so to me?

Can you drop the rear 1"-3" too?



All times are GMT -4. The time now is 01:48 AM.