wisconsin car club (balts and ions)
Senior Member
Join Date: 03-31-07
Location: Milwaukee, WI
Posts: 1,294
Likes: 0
Received 0 Likes
on
0 Posts
summer fest is ok but all the drunken retards **** me off cause they dont move out of the way and they stumble over themselves then onto you. I usually only go if theres a band or something down there worth going too. Im more of a state fair person...
summer fest is ok but all the drunken retards **** me off cause they dont move out of the way and they stumble over themselves then onto you. I usually only go if theres a band or something down there worth going too. Im more of a state fair person...
anyone hear about billy mays????
http://www.foxnews.com/story/0,2933,529328,00.html
summer fest is ok but all the drunken retards **** me off cause they dont move out of the way and they stumble over themselves then onto you. I usually only go if theres a band or something down there worth going too. Im more of a state fair person...
anyone hear about billy mays????
http://www.foxnews.com/story/0,2933,529328,00.html
Last edited by Z Speed; 06-28-2009 at 07:23 PM. Reason: Automerged Doublepost
Member
Join Date: 03-15-09
Location: Prairie du Chien, WI
Posts: 229
Likes: 0
Received 0 Likes
on
0 Posts
last concert i went to was Saving Abel, Shinedown, Avenged Sevenfold, and Buckcherry, seen them at the La Crosse center....$40 for all four bands....and i was practically front row
Senior Member
Join Date: 08-23-08
Location: Somers, Wisconsin
Posts: 3,767
Likes: 0
Received 0 Likes
on
0 Posts
if you end up going Wensday, give me a call, maybe we can meet up.
Senior Member
alex or anyone, do i need new bolts for flywheel to crank? i havent read anything anywhere about having to replace them but i just wnat to make sure so i dont get screwed on having to wait for them.
Senior Member
thats what i thought. just making sure. Im gonnna try and have the car atleast running by next weekend, the only thing i dont have are my parts i ordered to build my downpipe and my tune.
Senior Member
iTrader: (4)
-2 cam gear bolts (they are tq to yield)
-8 rod bolts (tq to yield)-crank pulley bolt (tq to yield)
-timing chain cover gasket
-valve cover gasket
-head gasket
-head studs
-assembly lube-1 qt of race oil to lube up piston skirts and rings when installing
-blue and red loctite-piston ring compressor
-new rings (whether you go with stock or not, replace them)Take your time, use a ft/lb torque wrench on stuff rated in ft/lbs and use an in/lb wrench on things rated in in/lbs.
Senior Member
Join Date: 03-31-07
Location: Milwaukee, WI
Posts: 1,294
Likes: 0
Received 0 Likes
on
0 Posts
-RTV for the oil pan(it doesn't have an actual gasket)
-2 cam gear bolts (they are tq to yield)
-8 rod bolts (tq to yield)-crank pulley bolt (tq to yield)
-timing chain cover gasket
-valve cover gasket
-head gasket
-head studs
-assembly lube-1 qt of race oil to lube up piston skirts and rings when installing
-blue and red loctite-piston ring compressor
-new rings (whether you go with stock or not, replace them)Take your time, use a ft/lb torque wrench on stuff rated in ft/lbs and use an in/lb wrench on things rated in in/lbs.
-2 cam gear bolts (they are tq to yield)
-8 rod bolts (tq to yield)-crank pulley bolt (tq to yield)
-timing chain cover gasket
-valve cover gasket
-head gasket
-head studs
-assembly lube-1 qt of race oil to lube up piston skirts and rings when installing
-blue and red loctite-piston ring compressor
-new rings (whether you go with stock or not, replace them)Take your time, use a ft/lb torque wrench on stuff rated in ft/lbs and use an in/lb wrench on things rated in in/lbs.
http://buy1.snapon.com/catalog/item....re&dir=catalog
I bought one of those...
probably the greatest tool cause it does all formats of tq and also does torque angles
anyone need the torque numbers just shoot me a pm with ur email address and i can send it to ya
also if your running arp studs make sure that you use the proper sockets cause I know arp has both 6 and 12 point hardware. dont use a 12 point sockets on 6 point hardware. easy way to lose that crucial tq needed cause the tips of the bolt/nut will try to round off
Senior Member
iTrader: (4)
http://buy1.snapon.com/catalog/item....re&dir=catalog
I bought one of those...
probably the greatest tool cause it does all formats of tq and also does torque angles
I bought one of those...
probably the greatest tool cause it does all formats of tq and also does torque angles
You should let Jordan borrow that.