North Central ND, SD, MN, and WI

Wisconsin Thread (Team Rev & Others)

Thread Tools
 
Search this Thread
 
Old 03-15-2012 | 02:08 PM
  #4401  
CCrunner84's Avatar
New Member
 
Joined: 08-11-09
Posts: 186
Likes: 0
From: Racine, WI
Originally Posted by ir2005
Magna mufflers seem to rot ou.my I'd like to have him make one to buy on is quite expensive for my budget right now.
I'd avoid the resonators too, didn't have mine for that long and it sounded terrible, metal loose inside, rattling around, wasn't good!
Old 03-15-2012 | 04:24 PM
  #4402  
VapeWI's Avatar
Senior Member
iTrader: (2)
 
Joined: 07-13-11
Posts: 1,201
Likes: 0
From: Milwaukee, WI
I plasti dipped my rims today guys. I'll post pics I believe I will be putting them back on tomorrow.
Old 03-15-2012 | 09:25 PM
  #4403  
VapeWI's Avatar
Senior Member
iTrader: (2)
 
Joined: 07-13-11
Posts: 1,201
Likes: 0
From: Milwaukee, WI
Here is a pic of them done. I should have them on the car tomorrow.

Old 03-15-2012 | 10:36 PM
  #4404  
CCrunner84's Avatar
New Member
 
Joined: 08-11-09
Posts: 186
Likes: 0
From: Racine, WI
Wow, never heard of this stuff before, pretty slick that you can actually remove it fairly easily to without damaging anything.
Old 03-15-2012 | 11:09 PM
  #4405  
strazdice's Avatar
Senior Member
iTrader: (1)
 
Joined: 03-24-10
Posts: 979
Likes: 0
From: wisconsin
Originally Posted by ir2005
Magna mufflers seem to rot ou.my I'd like to have him make one to buy on is quite expensive for my budget right now.
Yep indeed, it did sd gd tho, he had a 3in and header on it, pm matt its a gd deal for a gd exhaust, rims look nice mark can't wait to see them in person
Old 03-15-2012 | 11:21 PM
  #4406  
ebristol's Avatar
Senior Member
iTrader: (4)
 
Joined: 04-15-07
Posts: 5,464
Likes: 3
From: WI
Originally Posted by CCrunner84
Wow, never heard of this stuff before, pretty slick that you can actually remove it fairly easily to without damaging anything.
dipyourcar.com

They used to have like 8 colors you could order but they are changing their formula or something.

Originally Posted by strazdice
Yep indeed, it did sd gd tho, he had a 3in and header on it, pm matt its a gd deal for a gd exhaust, rims look nice mark can't wait to see them in person
See my new toy?

Old 03-15-2012 | 11:32 PM
  #4407  
strazdice's Avatar
Senior Member
iTrader: (1)
 
Joined: 03-24-10
Posts: 979
Likes: 0
From: wisconsin
Tvs? can't wait bud shud b a gd run me n u . Actually I can't see anything

Last edited by strazdice; 03-15-2012 at 11:44 PM.
Old 03-16-2012 | 12:17 AM
  #4408  
VapeWI's Avatar
Senior Member
iTrader: (2)
 
Joined: 07-13-11
Posts: 1,201
Likes: 0
From: Milwaukee, WI
Originally Posted by CCrunner84
Wow, never heard of this stuff before, pretty slick that you can actually remove it fairly easily to without damaging anything.
I actually didn't even have to mask off the tire. I just put a end of the screwdriver to make a hole and peeled it right off. Here check it out.

Plasti Dip Overspray? No Worries - YouTube
Old 03-16-2012 | 06:22 PM
  #4409  
VapeWI's Avatar
Senior Member
iTrader: (2)
 
Joined: 07-13-11
Posts: 1,201
Likes: 0
From: Milwaukee, WI
Ok the wheels are on and they look great!



Last edited by VapeWI; 03-16-2012 at 06:28 PM.
Old 03-16-2012 | 07:17 PM
  #4410  
CCrunner84's Avatar
New Member
 
Joined: 08-11-09
Posts: 186
Likes: 0
From: Racine, WI
Originally Posted by VapeWI
I actually didn't even have to mask off the tire. I just put a end of the screwdriver to make a hole and peeled it right off. Here check it out.

How durable is this stuff? I'm curious to see how well it holds up for you.
Old 03-16-2012 | 09:49 PM
  #4411  
Jellobriafra's Avatar
Member
 
Joined: 12-19-07
Posts: 298
Likes: 0
From: Reedsburg, WI
Fak - my car is in limp mode with a CEL. Hope it isn't anything big.
Old 03-16-2012 | 10:37 PM
  #4412  
VapeWI's Avatar
Senior Member
iTrader: (2)
 
Joined: 07-13-11
Posts: 1,201
Likes: 0
From: Milwaukee, WI
Originally Posted by CCrunner84
How durable is this stuff? I'm curious to see how well it holds up for you.
seems to be pretty durable. It can withstand power washing so I think it should be pretty much good for the most part. From what I read most people even after a year it still looks new.
Old 03-17-2012 | 02:49 AM
  #4413  
strazdice's Avatar
Senior Member
iTrader: (1)
 
Joined: 03-24-10
Posts: 979
Likes: 0
From: wisconsin
Originally Posted by Jellobriafra
Fak - my car is in limp mode with a CEL. Hope it isn't anything big.
What yr is your car? Might have the old intercooler which is know to fail, otherwise its prolly charge piping or bypass failed. Are you tunned? What cel's? May be a vac leak somewhere in the lines, is the maf clean?

Last edited by strazdice; 03-17-2012 at 10:12 AM.
Old 03-17-2012 | 10:02 AM
  #4414  
07cobaltguy's Avatar
Thread Starter
Senior Member
 
Joined: 06-01-07
Posts: 3,188
Likes: 2
From: Jackson, Wisconsin
Clutch will be here monday. I picked up a 23k mile motor out of an 08 for $476 with tax. Should be running by friday. Im going to break in the clutch then in the next month install rods and pistons.
Old 03-17-2012 | 10:10 AM
  #4415  
strazdice's Avatar
Senior Member
iTrader: (1)
 
Joined: 03-24-10
Posts: 979
Likes: 0
From: wisconsin
Nice jim what kind of clutch did ya go with? and mark rims look good bud
Old 03-17-2012 | 10:17 AM
  #4416  
07cobaltguy's Avatar
Thread Starter
Senior Member
 
Joined: 06-01-07
Posts: 3,188
Likes: 2
From: Jackson, Wisconsin
KY Stage 3 Clutch. ~450 shipped
Old 03-17-2012 | 10:20 AM
  #4417  
Jellobriafra's Avatar
Member
 
Joined: 12-19-07
Posts: 298
Likes: 0
From: Reedsburg, WI
Originally Posted by strazdice
What yr is your car? Might have the old intercooler which is know to fail, otherwise its prolly charge piping or bypass failed. Are you tunned? What cel's? May be a vac leak somewhere in the lines, is the maf clean?
Thanks for the info Straz. I checked the charge piping (I put the Turbo XS piping in last fall) and found a broken T-clamp. I'm assuming that's the problem. Now I just have to get it fixed-those things are a pain in the ass. It's on the cold side pipe on the bottom.
Old 03-17-2012 | 11:57 AM
  #4418  
strazdice's Avatar
Senior Member
iTrader: (1)
 
Joined: 03-24-10
Posts: 979
Likes: 0
From: wisconsin
Originally Posted by Jellobriafra
Thanks for the info Straz. I checked the charge piping (I put the Turbo XS piping in last fall) and found a broken T-clamp. I'm assuming that's the problem. Now I just have to get it fixed-those things are a pain in the ass. It's on the cold side pipe on the bottom.
Hey no prob hell yea it is hope ya got skinny arms do u have a upgraded intercooler? I hope it is as well
Old 03-17-2012 | 11:58 AM
  #4419  
strazdice's Avatar
Senior Member
iTrader: (1)
 
Joined: 03-24-10
Posts: 979
Likes: 0
From: wisconsin
Nice jim that's the one I want
Old 03-17-2012 | 12:02 PM
  #4420  
overboostedss's Avatar
Senior Member
 
Joined: 10-16-09
Posts: 744
Likes: 0
From: Wi
hahah Im doing a clutch job on my brother in laws, roomates, sisters 02 calavier. had to drive down to milwakee and trailer it home. road construction sucks down there with a loaded trailer and truck hahaha
Old 03-17-2012 | 12:57 PM
  #4421  
Jellobriafra's Avatar
Member
 
Joined: 12-19-07
Posts: 298
Likes: 0
From: Reedsburg, WI
Car is fixed. Skinny arms ftw! Hehe. Played hell trying to find a new T-clamp - no one in town had any in stock. Then I remembered the factory pipe had T-clamps on it *facepalm*. Anyway, seems to be running fine now. Just need to get the code cleared.

I don't have an upgraded IC. I figured that could wait until I get tuned. I was hoping that would be soon but I need to be careful w/ money now that my wife's hours got cut back to 2 days/week at work. Such is life I guess...
Old 03-18-2012 | 01:41 AM
  #4422  
strazdice's Avatar
Senior Member
iTrader: (1)
 
Joined: 03-24-10
Posts: 979
Likes: 0
From: wisconsin
I hear ya all day, ya ic would be great, glad everything is squared up and hey if ya need a tune let me kno
Old 03-18-2012 | 08:01 PM
  #4423  
VapeWI's Avatar
Senior Member
iTrader: (2)
 
Joined: 07-13-11
Posts: 1,201
Likes: 0
From: Milwaukee, WI
Here is the exhaust guys and gals. Matt did an amazing job and I would recommend him to anyone. Everything sounds great and I got an avg of 33mpg's on the way home! I do need to make the exhaust a little more secure as it moves around on bumps a bit but other than that I am happy as a pig in ****!

Old 03-19-2012 | 02:43 AM
  #4424  
strazdice's Avatar
Senior Member
iTrader: (1)
 
Joined: 03-24-10
Posts: 979
Likes: 0
From: wisconsin
Man what exhaust?? All I see is the TIP!
Old 03-19-2012 | 10:05 AM
  #4425  
07cobaltguy's Avatar
Thread Starter
Senior Member
 
Joined: 06-01-07
Posts: 3,188
Likes: 2
From: Jackson, Wisconsin
Any of you guys ever have to file a complaint with the Labor or Bureau of Apprenticeship standards? My employer fucked up my last paycheck and didn't pay me for my apprenticeship schooling. So i lost 16hrs of regular pay and then 16hrs of OT that wouldve resulted from those 16 hrs. Now they dont want to pay me for a whole pay period which A. i am the only income in my household and B. is bullshit because they fucked up its not my fault so why should i be punished for it when they throw $800 extra dollars on my check and obama gives me a rectal exam because of it. Total ******* crap.


Quick Reply: Wisconsin Thread (Team Rev & Others)



All times are GMT -4. The time now is 02:37 AM.